Question about Sony Xs-l121ps Xplod 350 Watt Rms 12" Car Subwoofer

Need the measurements in inches please

Ad

12 x 12 x 12 = 1 cubic ft. Multiple answer by 1.15 for cubic inches

Posted on Apr 21, 2015

Ad

1987.2 cubic inches.

Posted on Apr 21, 2015

Ad

Hi there,

Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

the driveway is 146 cubic ft of material but to get the rest you have to have a 3rd dimension to get it to cubic capacity

so apron is 18 ? by2.5 fy by ? thick

blocks 5 X5 ft X ?

22 linear feet requires l X B X depth to get cubic measurement (linear measure is just a length measurement--not a volume measurement)

side walk blocks of 600 is no measurement in cubic measurement

snap back walk ways 3 X 35 ' X? to get cubic ft

if you have a total of 200 what --cubic feet , cubic yards

I'm guessing here but I take it that you want to know how much concrete you will need to do the job

so apron is 18 ? by2.5 fy by ? thick

blocks 5 X5 ft X ?

22 linear feet requires l X B X depth to get cubic measurement (linear measure is just a length measurement--not a volume measurement)

side walk blocks of 600 is no measurement in cubic measurement

snap back walk ways 3 X 35 ' X? to get cubic ft

if you have a total of 200 what --cubic feet , cubic yards

I'm guessing here but I take it that you want to know how much concrete you will need to do the job

Apr 21, 2017 | Hard Computers & Internet

You don't have enough information there to help you. You can't change 12 feet into cubic feet without the other measurements. You need width, depth and height. You just multiply each measurement by each other.

If it was 12 feet wide, 12 feet deep and 12 feet high, it would be 12 x 12 = 144 x 12 is 1,728 cubic feet.

If all the measurements add up to 12, it may be 6 x 4 x 2 or similar, it would be 48 cubic feet.

Click COMMENT under my post if you need further help.

If it was 12 feet wide, 12 feet deep and 12 feet high, it would be 12 x 12 = 144 x 12 is 1,728 cubic feet.

If all the measurements add up to 12, it may be 6 x 4 x 2 or similar, it would be 48 cubic feet.

Click COMMENT under my post if you need further help.

Mar 15, 2017 | Office Equipment & Supplies

1
Open the refrigerator door. Measure the depth of the refrigerator

from the front edge of the refrigerator opening to the back wall. Make sure that you measure in feet and not in inches. Note the depth measurement on a piece of paper.

2 Measure the height and the width of your refrigerator's opening. Note the two additional measurements on your paper. Multiply the depth, height and width measurements to obtain the refrigerator's cubic foot measurement.

3 Take the same measurements from the interior of the freezer. Multiply those measurements together to get the cubic foot size of your freezer.

4 Add the cubic foot measurement of the refrigerator interior to the cubic foot measurement of the freezer interior. This gives you the total cubic foot measurement for the refrigerator.

Things You Will Need

from the front edge of the refrigerator opening to the back wall. Make sure that you measure in feet and not in inches. Note the depth measurement on a piece of paper.

2 Measure the height and the width of your refrigerator's opening. Note the two additional measurements on your paper. Multiply the depth, height and width measurements to obtain the refrigerator's cubic foot measurement.

3 Take the same measurements from the interior of the freezer. Multiply those measurements together to get the cubic foot size of your freezer.

4 Add the cubic foot measurement of the refrigerator interior to the cubic foot measurement of the freezer interior. This gives you the total cubic foot measurement for the refrigerator.

Things You Will Need

- Tape measure
- Note paper

May 19, 2016 | Kenmore Refrigerators

linear feet is a length measurement as to how long it is --example : a piece of timber 20 feet long is 20 linear feet

the measurements you have provided will give a cubic feet measurements which is a volume measurement. so convert all the dimensions to feet , multiply all together and that will be your volume

the measurements you have provided will give a cubic feet measurements which is a volume measurement. so convert all the dimensions to feet , multiply all together and that will be your volume

May 03, 2016 | Luggage & Travel

Determining the cubic feet of any given appliance, Microwave, Oven, Freezer or Refrigerator is quite simple.

Follow these steps.

Open the door of your microwave and measure the length, width and height in inches of the interior cavity.

Multiply the length by the width by the height using a calculator to get the total in cubic inches.

Divide the cubic inches by 1,728, which is the volume of a cubic foot. The resulting number will be your microwave's measurement in cubic feet. You can also use an online conversion calculator to simplify matters

Hope that helps

Follow these steps.

Open the door of your microwave and measure the length, width and height in inches of the interior cavity.

Multiply the length by the width by the height using a calculator to get the total in cubic inches.

Divide the cubic inches by 1,728, which is the volume of a cubic foot. The resulting number will be your microwave's measurement in cubic feet. You can also use an online conversion calculator to simplify matters

Hope that helps

Sep 12, 2014 | General Electric Microwave Ovens

Calculating the cubic feet of a space requires multiplying the area of the bottom times the average height. You get the bottom area by multiplying the length times the width. Remember, to get cubic feet, you need all your measurements in feet to start with.

Here is your formula:

VOLUME (in cubic feet) = Length (in feet) X Width (in feet) X Height (in feet)

If it's a rectangular room you're working with, it is all straightforward. If there are irregular walls, it may be necessary to divide up the room into rectangular sections and then add together their individual volumes. If the ceiling is sloped, you need to use the height that has the same ceiling area above it as below it. Good luck! Truly.

Here is your formula:

VOLUME (in cubic feet) = Length (in feet) X Width (in feet) X Height (in feet)

If it's a rectangular room you're working with, it is all straightforward. If there are irregular walls, it may be necessary to divide up the room into rectangular sections and then add together their individual volumes. If the ceiling is sloped, you need to use the height that has the same ceiling area above it as below it. Good luck! Truly.

Jul 25, 2014 | Building Materials

One cubic foot is 1728 cubic inches.

Apr 21, 2014 | Refrigerators

I chatted with someone at Sears. They told me it is approx. 22 cu ft.

Alternatively, you could measure.

The first step is to open the refrigerator door. Measure the depth of the refrigerator from the front edge of the refrigerator opening to the back wall. Make sure that you measure in feet and not in inches. Note the depth measurement on a piece of paper.

Then, measure the height and the width of your refrigerator's opening. Note the two additional measurements on your paper. Multiply the depth, height and width measurements to obtain the refrigerator's cubic foot measurement.

Take the same measurements from the interior of the freezer. Multiply those measurements together to get the cubic foot size of your freezer.

Add the cubic foot measurement of the refrigerator interior to the cubic foot measurement of the freezer interior. This gives you the total cubic foot measurement for the refrigerator.

Alternatively, you could measure.

The first step is to open the refrigerator door. Measure the depth of the refrigerator from the front edge of the refrigerator opening to the back wall. Make sure that you measure in feet and not in inches. Note the depth measurement on a piece of paper.

Then, measure the height and the width of your refrigerator's opening. Note the two additional measurements on your paper. Multiply the depth, height and width measurements to obtain the refrigerator's cubic foot measurement.

Take the same measurements from the interior of the freezer. Multiply those measurements together to get the cubic foot size of your freezer.

Add the cubic foot measurement of the refrigerator interior to the cubic foot measurement of the freezer interior. This gives you the total cubic foot measurement for the refrigerator.

Apr 10, 2013 | Refrigerators

1 **cubit [Roman] is **17.4803149606 inches

If you are referring to cubic feet to inches then you need cannot when cubic feet is a volume measurement and inches is a length measurement.

If you are referring to cubic feet to inches then you need cannot when cubic feet is a volume measurement and inches is a length measurement.

Jul 17, 2010 | Acme Automotive ACMA680CS Typhoon High...

20.9 cubic feet for model # RT21AKXKQ

14 cubic feet for model number RT14BKXKQ05

14 cubic feet for model number RT14BKXKQ05

Jun 07, 2009 | Roper RT21AKXKQ Top Freezer Refrigerator

132 people viewed this question

Usually answered in minutes!

×