Question about Videosecu TV Ceiling Mount for Vizio 23 24 26 28 29 32 37 39 40 42 46 47 48 E320I-B1 M320SL E370VL E390VL M401i-A3 E422VLE E420i-A0 E461-A1 E470i-A0 E480i-B2 LCD LED Plasma HDTV 1GZ

1 Answer

What the problem when tv want power on

Will not power on put in new power board . still want power on

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Videosecu Master
  • 73,635 Answers

Fault to its main board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ . In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.

Posted on Apr 20, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Model KDL32BX300. Why won't it turn on?


PLEASE CHANGE THE INVERTER BOARD BECAUSE YOUR 24 VOLTS ARE SHOTED

Dec 20, 2015 | Sony Televison & Video

1 Answer

Hello. My 32" Emerson TV has no power. Standby light doesn't come on when its plugged in.


Fault to the main power supply regulator section. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

Nov 20, 2015 | Emerson LC320EMXF 32 in. LCD TV

1 Answer

I will start from the beginning. Back in Sept. my vizio tv would just randomly turn off here and there, but would always turn back on. Mid october the tv randomly turned off and never turned back on.


Claim lightning damage, put old boards back in it, sell new boards on ebay while a shop fixes the set for free (minus deductible paid for by selling ebay boards). Tada, repaired!

Or just sell the panel on ebay and buy another tv. Don't break the panel shipping it. 25366436-l0u5xrrbjmm23votbgnhzwek-1-0.jpg

Jan 12, 2015 | Vizio E3D470VX 47 Class 3D LCD HDTV -...

1 Answer

Technika lcd42 207, new power board but still no power


Flickers as in the backlight flicekers. Could be cct protection for the baclight. faulty inverter board or lighting?

Mar 23, 2013 | Televison & Video

1 Answer

I have a 42PFL3403 model (42"). Was bought brand new. After a few months, started with problems. The image went off (sound OK). At the begining was enough to turn off and turn it on again. With the...


This tv it new still under a year old?Yes.Tries take Philips warrenty repair.The tv problems,to the tv are the causes of the tv power supply board.That the board where the power a/c cord plug into it.Tries websites like Shopjimmy.com,Ebay.com to buy a whole new refurbish power supply board for the replacement.

Jun 23, 2011 | Philips 42PFL3403 42 in. TV

2 Answers

I have a phillips lcd hdtv. When I turn it on the light blinks 6 times. I'm sure its the power supply board, my question is how do i repair the power supply board without replacing it? I have a power...


look ON THE POWER SUPPLY FOR SWOLLEN CAPASITORS. usually 2 RIGHT BY HEAT SINK. VALUE VARIES... REPLACE ANY SWOLLEN CAPASITORS AND SHOULD SOLVE PROBLEM

Feb 17, 2011 | Philips 37PF9631D 37 in. LCD HDTV

1 Answer

Whats involved in installing a new power supply board in an HP-T5404 Samsung Plasma TV?


hmmmm its easy really..

  • unscrew rear cover
  • cables from power board to other components
  • unscrew and remove power board
  • put in new board and screw down
  • re connect cables
  • screw back on the rear panel
  • plug in
  • turn on
  • watch!!

Sep 14, 2010 | Samsung PS50P7H 50 in. HD-Ready Plasma TV

1 Answer

The fuse in my polaroid tv blew. It keeps blowing the fuse when a new one is put in.


The odds are the circuit board that your putting the fuse in is shorted out. I'm guessing that it's a power supply board.

Disconnect every set of wires going to the board. Put the new fuse in. Plug in the power supply board. If the fuse pops, then the power supply board is the problem and has a short somewhere. Most replacement board can be found at a good price at Shopjimmy.com or Ebay.com. Just make sure the part number on the board matches up.

Nov 10, 2009 | Televison & Video

1 Answer

TV won't come on


The power board is gone. I have one and it did the same thing. I found a site with the board for about $149.00 but it was not worth it. The brand new board only lasted 30 days and it burnt out also. It seems that power supply board which is a different board and smaller board probably is bad as well and it burned up the new main power board I put in. This TV is not worth fixing. Sorry, it really sucks. Samsung supplies this board to SVA but the board is actually built by Gateway. Deal with this for the past 2 years and no one will take responsibility for it. Dead end with every effort. There were a group of us that was actually trying to file a class action class suit against SVA who is really not willing to help anyone but even that is not worth it. They could replace the board but the new one will burn out shortly after once it has already burnt the first board. Just a badly built TV. I am in the process of purchasing a new tv and I will never buy a Samsung product again becuase of this even though gateway built it for them. Sony or Sharp is my next option.

Good luck to you.

Oct 04, 2009 | SVA-USA HD4208TIIIBU 42 in. HD-Ready...

2 Answers

TV power will not stay on.


Not worth to fix.Either power supply,sensor or convertion board are too costly for the part.Buy a new TV.
solutiondoct

Nov 12, 2008 | Mitsubishi WS-55809 55" Rear Projection...

Not finding what you are looking for?
Videosecu TV Ceiling Mount for Vizio 23 24 26 28 29 32 37 39 40 42 46 47 48 E320I-B1 M320SL E370VL E390VL M401i-A3 E422VLE E420i-A0 E461-A1 E470i-A0 E480i-B2 LCD LED Plasma HDTV 1GZ Logo

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Videosecu Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73635 Answers

Cindy Wells

Level 3 Expert

5056 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Videosecu Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...