Question about Element Electronics FLX3210 32 in. LCD TV

Open Question

All hdmi pictures come and goes - Element Electronics FLX3210 32 in. LCD TV

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Aspire 6930 HDMI output shows only part of picture. Used to work correctly.


change the settings in the display adaptor for the HMDI. They may also be accessible in the display icon of the control panel.

Oct 06, 2014 | Acer Aspire 6930-6771 Laptop

2 Answers

Cant get new HDMI board for Onkyo TX-SR604


It's usually the hdmi switching IC that goes bad on these. Not something you can really replace without the right equipment and knowledge.

Jul 10, 2013 | Onkyo Tx-sr604 7.1 Channel A/v Receiver...

1 Answer

RX-V465 output HDMI 1 will work but HDMI 2-4 won't, also when I hook up Wii via rca to receiver only get sound no picture.


This receiver has only one HDMI output, but 4 HDMI inputs. If some inputs don't work, try connecting the equipment (DVD for example) to HDMI input which works with other equipment....
For the RCA (composite) video input - it won't work, because this receiver don't have any video processing circuit.
So HDMI input video goes to HDMI outout connector.
Composite (RCA) video input goes to Composite outout and no other video output.
S-video input goes only to s-video output.

Dec 20, 2009 | Yamaha Rx-v465/rxv465 Home Theater...

1 Answer

Our receiver is connected to our cable box via an HDMI cable. Picture and audio show up fine, then goes out for a minute and then comes back--this keeps happening. Every time the picture/sound disappear,...


Connect the TV directly to cable box to make sure the TV and cable box are ok. If you have picture then the receiver is no good. Some Denons have problem with HDMI board (digital unit).

Oct 06, 2009 | Denon AVR-2308CI

1 Answer

Picture goes of and on with HDMI1 on screen sounds stays on


This sounds like the signel board is going out in the HDMI jack and needs replaced! Also try another jack to make sure its not the cable!
Please rate my response!
Rhank You!

Jan 15, 2009 | Panasonic Viera TX-32LX70 32 in. LCD TV

1 Answer

Compatibility with Samsung LCD Display


It sounds like the HDMI port on the back of your Marantz is damaged. if you know for sure that the HDMI port works on another tv still you might just use component connection because the visible difference between component and HDMI is not very recognizable.

Jan 13, 2009 | Marantz DV4001 DVD Player

2 Answers

JVC LT-32DS75SJ issue with HDMI


Try this

1. Turn ON TV
2. Connect PS3 to TV HDMI input
3. select TV HDMI input for PS3
4. turn OFF PS3 if it is ON
5. Press and hold the [I/O]Power button until the PS3 until you get the "HDMI Detected" message.

Also, this TV has a circuit that deactivates the HDMI if the rear cover is removed. It is possible the HDMI may have been turned OFF. This is reset in the service menu of the TV.

Dec 17, 2008 | JVC LT-32X575 32 in. HD-Ready LCD...

1 Answer

No picture but sound on panasonic plasma


Unplug the TV and disconnect any HDMI cables to the set. If the issue goes away there is a possibility that your HDMI source is causing the problem. Anything on the HDMI can cause odd problems with the TV since the serial data and serail clock lines are routed on HDMI. Those are the 2 commmunication lines used throught the TV for operation so anything HDMI that might load down one of those can cause issues.

Mar 07, 2008 | Televison & Video

1 Answer

Hi guys, don't know if the previous post got through. Have a new LCD tv and DVDr, connected with a HDMI cable. when DVDr switched off analogue and digital picture is fine. as soon as dvd is switched on...


yes, hdmi will give you better results..
are you running hdmi to hdmi connection on tv from cable box?
if so, that is correct but as for the dvdr, what tv port are you connecting it to? i would use another hdmi cable for the dvd too for best picture resultif it's an option on your dvd.. you should have multiple input outlets on your lcd with 1-3 options for input devices via analog or hdmi.. so analog is not hdmi--hdmi is digital so it switches to the hdmi resolution when you turn it on..

let me know how it goes and if i was helpful involving resolution.. helpful feedback is appreciated.. thanks, d

your dvd player should be set to a different

Feb 27, 2008 | Televison & Video

Not finding what you are looking for?
Element Electronics FLX3210 32 in. LCD TV Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Element Electronics Televison & Video Experts

Cindy Wells

Level 3 Expert

5103 Answers

The Knight
The Knight

Level 3 Expert

74136 Answers

Josh Whitehead
Josh Whitehead

Level 3 Expert

1148 Answers

Are you an Element Electronics Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...