Question about Sceptre Televison & Video

1 Answer

Sceptre tv will not turn on

Red light went dark after pressing the power button on the remote.

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Sceptre Master
  • 74,251 Answers

Fault in the main power supply regulator board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

Posted on Apr 20, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My sceptre has no power. The red light doesnt come on. could it be the power cord.


I am afraid the power supply has gone bad. but look for damage on the cord, and do a wiggle test on cord as you try to turn tv on.
press the helpful button and follow me on fixya for more tips

Jan 28, 2016 | Sceptre Televison & Video

1 Answer

When i turn on my LG 32lg30 on, the power indicator light flashes red 4-5 times, then the monitor turns on to a steady dark blue color. I tried to press buttons on the remote but there is no display.


Now there is a challange.
My LG has not shown this behaviour yet. Do you still have the DVD disk that came with the TV.
If you do you will get your answer there I presume.
Make sure that you are using the correct input.
kollagunn

Feb 21, 2012 | LG 32LG30 32 in. LCD HDTV

2 Answers

Dish network remote control code for sceptre television


Hi, my name is Cheri Torres and I am with DISH Network Internet Response Team. I came across your post and wanted to see if I could help. I will list here for you the best codes for addressing a DISH remote to a Sceptre TV. I will also list the instructions for addressing your remote to your TV. I hope you find this information useful and if you have any further questions or concerns please feel free to ask.

Remote codes for Sceptre - 500 and 677.

Instructions for addressing the remote to the TV
1. Press and hold down the TV button until all the mode button light up red.
2. Enter the 3 digit code for your TV in the remote keypad.
3. Press the pound(#) button once.
4. Test the functionality of your TV.

Dec 25, 2011 | Sceptre X370BV-HD TV

1 Answer

I have a Sceptre 46 in. LCD TV. It worked fine with Comcast until 4:00 AM EST last Wednesday, when it turned itself on. I came into the living room and saw the display on the COMCAST DVR flashing on and...


Try reprogramming the remote the code for scepter is
10889 if you have a RED ok select button on your remote or if you have a DARK SILVER remote

Brand: Sceptre

Most likely code: 10889

  1. Turn on a device (e.g., VCR or DVD Player) and, if applicable, insert media, (e.g., video cassette or disc).
    NOTE: Please read steps 2 to 6 completely before proceeding. Highlight or write down the codes and device you wish to program before moving on to step 2
  2. On the remote control, press a device key once (i.e., or TV).
    NOTE: Use the AUX key to program control of an Audio Amplifier or Receiver, a DVD Player, a Home-Theater-In-A-Box Device, a PVR (or DVR), or a VCR.
  3. Press and hold Setup until the selected mode key blinks twice, then release Setup.
  4. Locate the code for your device in Manufacturer's Codes listed below. Brands are listed in alphabetical order with the most popular codes listed first.
  5. Enter the first five-digit code for your device. If you perform this procedure correctly, the selected mode key will blink twice.
    NOTE: If you enter an invalid code, the selected mode key will display one long blink and exit the programming mode. Repeat steps 2 to 5 with a valid code.
  6. Aim the remote control at your device and press Power once. The device should turn off. If it does not respond, repeat steps 2 to 6, trying each code listed for your brand until you find one that works. If it still does not work, try Searching For Your Code.
    NOTE: If the device does not have a Power key, press the (Play) key

Dec 02, 2010 | Sceptre X42GV-Naga 42 in. LCD Television

1 Answer

No power. Died when turning on to watch TV.


unplug for a couple of minutes then plug back in and try

Oct 29, 2009 | Niko SV3206 32 in. LCD Television

2 Answers

Tv wont turn on


take your tv to technician who can check your power supply, if your power is coming on and off, than a problem is not as big. firstly let him check a ht of a supply constantly, your supply is cutting.

Nov 03, 2008 | Panasonic CT-32SC13 32" TV

2 Answers

New Sceptre 37" LCD TV does not turn on


I just got a 42" komodo by Sceptre, same problem, except "SCEPTRE" showed on the screen. I was sent a USB key program to insert in the service slot in the back and it reflashes the bios. This is old news for you but maybe new for someone?

Aug 28, 2006 | Sceptre X37sv-Naga 37 in. LCD Television

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sceptre Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74251 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Sceptre Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...