Question about Computers & Internet

1 Answer

Cord is defective and newbook will not hold full battery service

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 24 Answers

Your battery is the culprit. If the device charges at all, it is not your cord. If the charge will not hold, its your battery.

Posted on Apr 20, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to hook up smart cycle


There is no power cord. There is a battery compartment on the underside that hold 4 D size batteries.

Jul 23, 2012 | Fisher Price Fisherprice Smart Cycle...

1 Answer

Dell inspiron 15 pp41l will not power on


Remove battery and clean contact points and reinstall the battery! if still does not work charge battery full and try again! If still does not work either battery is defective or power cord may not be good to charge the power!

Sep 23, 2011 | Dell Inspiron 1501 Notebook

1 Answer

How do i change battery in 2006 seabring


REMOVAL The battery is accessible without removing the left front wheel and tire assembly..
1. Verify that the ignition switch and all accessories are OFF. 2. Turn the steering wheel to the full left position. 3. Disconnect and isolate the negative battery cable remote terminal from the remote battery post. WARNING: NEVER GET UNDER A LIFTED VEHICLE IF NOT SUPPORTED PROPERLY ON SAFETY STANDS.
4. Remove battery splash shield. Refer to the Body section of the service manual for the procedure. 5. Disconnect the heater blanket cord, if equipped.
316275.jpg Fig. 1 - Battery Location 1 - BATTERY HOLD DOWN 2 - BATTERY
6. Remove the short bolt from the battery hold down and remove the hold down Fig. 1 . 7. Disconnect the negative and positive battery cables from the battery. 8. Slide the battery toward rear of vehicle and lift out of the battery tray. 9. Remove battery from vehicle.

Jan 21, 2011 | 2006 Chrysler Sebring

2 Answers

Battery New battery won't hold a charge on Acer 3100


New battery will typically take 12 hrs for first charge.

Mar 08, 2010 | Acer Aspire 3000 Notebook

1 Answer

UNABLE to Init.


Unplug the printer from power cord.Press and hold the "menu" button, then plug the device.You'll see on the LCD screen a "machine error" code.If this code is 40,41,49 or 4F the print head is defective.If the error is 48 - defective print head cable or circuit board.If the error is 50 or 51 there is error in Purge unit and printer require service.If the error is 46 the waste ink tank is full.Follow this:
Enter 80, then scroll down with the arrow down (round) key. You'll find an entry listed as purge count. If number is over 6000, enter 2 7 8 3.This will reset the purge count value. Then restart the printer, hopefully without the annoying message.

Dec 01, 2009 | Brother MFC-5440CN All-In-One InkJet...

1 Answer

Unable to init.after period of none use


Unplug the printer from power cord.Press and hold the "menu" button, then plug the device.You'll see on the LCD screen a "machine error" code.If this code is 40,41,49 or 4F the print head is defective.If the error is 48 - defective print head cable or circuit board.If the error is 50 or 51 there is error in Purge unit and printer require service.If the error is 46 the waste ink tank is full.Follow this:
Enter 80, then scroll down with the arrow down (round) key. You'll find an entry listed as purge count. If number is over 6000, enter 2 7 8 3.This will reset the purge count value. Then restart the printer, hopefully without the annoying cannot clean message.

Nov 23, 2009 | Brother MFC-3240C All-In-One InkJet...

1 Answer

Unable to init.


Unplug the printer from power cord.Press and hold the "menu" button, then plug the device.You'll see on the LCD screen a "machine error" code.If this code is 40,41,49 or 4F the print head is defective.If the error is 48 - defective print head cable or circuit board.If the error is 50 or 51 there is error in Purge unit and printer require service.If the error is 46 the waste ink tank is full.Follow this:
Enter 80, then scroll down with the arrow down (round) key. You'll find an entry listed as purge count. If number is over 6000, enter 2 7 8 3.This will reset the purge count value. Then restart the printer, hopefully without the annoying cannot clean message.

Nov 20, 2009 | Brother MFC-5440CN All-In-One InkJet...

1 Answer

My mfc210c displays an unable to clean message, what do i do


Unplug the printer from power cord.Press and hold the "menu" button, then plug the device.You'll see on the LCD screen a "machine error" code.If this code is 40,41,49 or 4F the print head is defective.If the error is 48 - defective print head cable or circuit board.If the error is 50 or 51 there is error in Purge unit and printer require service.If the error is 46 the waste ink tank is full.Follow this:
Enter 80, then scroll down with the arrow down (round) key. You'll find an entry listed as purge count. If number is over 6000, enter 2 7 8 3.This will reset the purge count value. Then restart the printer, hopefully without the annoying cannot clean message.

Nov 18, 2009 | Brother MFC 210C All-In-One InkJet Printer

1 Answer

Brother MFC-26-c >>>> clean unable


Unplug the printer from power cord.Press and hold the "menu" button, then plug the device.You'll see on the LCD screen a "machine error" code.If this code is 40,41,49 or 4F the print head is defective.If the error is 48 - defective print head cable or circuit board.If the error is 50 or 51 there is error in Purge unit and printer require service.If the error is 46 the waste ink tank is full.Follow this:
Enter 80, then scroll down with the arrow down (round) key. You'll find an entry listed as purge count. If number is over 6000, enter 2 7 8 3.This will reset the purge count value. Then restart the printer, hopefully without the annoying cannot clean message.

Nov 13, 2009 | Brother MFC 240C All-In-One InkJet Printer

1 Answer

MFC 5440cnz I get ''unable to clcean message'' have unplugged it and restarted cimouter, but still getting message


Unplug the printer from power cord.Press and hold the "menu" button, then plug the device.You'll see on the LCD screen a "machine error" code.If this code is 40,41 or 4F the print head is defective.If the error is 48 - defective print head cable or circuit board.If the error is 50 or 51 there is error in Purge unit and printer require service.If the error is 46 the waste ink tank is full.Follow this:
Enter 80, then scroll down with the arrow down (round) key. You'll find an entry listed as purge count. If number is over 6000, enter 2 7 8 3.This will reset the purge count value. Then restart the printer, hopefully without the annoying cannot clean message.

Nov 10, 2009 | Office Equipment & Supplies

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

823 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...