Question about Sanyo Televison & Video

2 Answers

How do I take my sanyo tv off of video without remote

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Sanyo Master
  • 73,698 Answers

There is no way to select its inputs without a remote control.
If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability.
Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops.
Type in the "brand name only" of your device, in the search box [at the top right] of the display window and the Search will start at once as you type in, and will show you all the related posts. It will make surf easy.

Posted on Apr 20, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Sanyo Master
  • 41,482 Answers

With one of the built in buttons of course .

Posted on Apr 19, 2015

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Sanyo DS31590 31" TV

Nope. Remote control is required... However some universal remotes come with this button available in the preprogrammed code. I had a cheap GE universal remote that I used to replace the original when my 2 year old smashed it. I now have a sony universal remote and it's default code (one of them) for Sanyo tv's also works for the video/input button.

Posted on Dec 28, 2007

  • 63 Answers

SOURCE: Sanyo DS19310 access video in without remote.

your setup is already good. your only problem is how to get in into video mode. use the menu button on your tv then select for Video/Game mode using channel menu button. there should be a solid blue screen with the word Game or Video displayed. please try. let me know if this doesnt work.

Posted on Apr 15, 2009

lilmikew99
  • 105 Answers

SOURCE: I can't switch to aux/video without my remote.

not really sure about this but if you put a disk in then run auto scan for your channels,long shot but worth a try.

Posted on May 11, 2009

  • 115 Answers

SOURCE: can you switch from tv to video input on sanyo

no you require the remote or a universal remote or sometimes a cable remote that has been programmed to work the volume on the tv set will have an input button .

Posted on Sep 29, 2009

  • 17 Answers

SOURCE: how do i get to video mode without original remote

you should have an input button. if so press the button until you get to the input that your dvr/vcr player is on. if you do not have a input button got to the menu button and you should be able to change the input thru the menu.

Posted on Jan 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turn on sanyo flat panel tv


Without a remote control you can't. Buy a new one.

Feb 16, 2017 | Sanyo Televison & Video

2 Answers

My tv is stuck on the blue screen .


Go push menu button on the front of tv or the right side.Pick the video out,or tv.Or buy a remote.Website 1-800-Remotes factory Original.For the original remote.

Dec 18, 2009 | Sanyo DS27510 27" TV

2 Answers

Can you switch from tv to video input on sanyo ds31520 tv without a remote


no you require the remote or a universal remote or sometimes a cable remote that has been programmed to work the volume on the tv set will have an input button .

Sep 29, 2009 | Sanyo DS31520 31" TV

1 Answer

I can't switch to aux/video without my remote.


not really sure about this but if you put a disk in then run auto scan for your channels,long shot but worth a try.

May 11, 2009 | Sanyo DS19310 19" TV

1 Answer

Sanyo DS19310 access video in without remote. Device is hooked to video in. How can I get it on the screen without the remote? Or, what is the best way to hook in a DVD player when I don't have the sanyo...


your setup is already good. your only problem is how to get in into video mode. use the menu button on your tv then select for Video/Game mode using channel menu button. there should be a solid blue screen with the word Game or Video displayed. please try. let me know if this doesnt work.

Mar 31, 2009 | Sanyo DS19310 19" TV

1 Answer

Change channel without remote


Hi , there is a button on your tv set near the channel button. that will set your tv to video.

Dec 31, 2008 | Sanyo DS27930 27" TV

2 Answers

Sanyo DS31520 TV


I am relentless when it comes to problems like this. I had the same problem with my TV being stuck in video mode. I found out that there is a reset button......It's on the @*&#^&^ original remote!!!!! So I tried programming my Time Warner Scientific Atlanta AT8550 remote for the TV to see if the "video source" button would work. IT WORKED!!!! You have to use code 1062. Instructions are:

1. Turn the TV on.
2. Press and hold select and the TV keys until the lights blink twice.
3. Enter 1062. All mode keys blink twice to indicate that the code was accepted.
4. Point the remote at the TV and press power to test the TV.
5. You can then successfully use the "Video Source" button on the bottom left of the remote to change the video mode. VOILA!!!

If you don't have a Scientific Atlanta AT8550 remote, I'm sure you know someone that does. They're everywhere!

Feb 10, 2008 | Sanyo DS31520 31" TV

1 Answer

Sanyo TV stuck on video channel


sanyo ds35590 no remote, tried universial remote still cannot select menu on uvm. What remote do I need? Or can I get into the menu without remote. I am trying to watch a dvd.

Jan 17, 2008 | Televison & Video

1 Answer

Sanyo DS31590 31" TV Can I get the tv to go into tv/video mode without a remote but from the tv menu directly?


Nope. Remote control is required... However some universal remotes come with this button available in the preprogrammed code. I had a cheap GE universal remote that I used to replace the original when my 2 year old smashed it. I now have a sony universal remote and it's default code (one of them) for Sanyo tv's also works for the video/input button.

Dec 19, 2007 | Sanyo DS31590 31" TV

1 Answer

My Sanyo Tv wont play dvds without the remote


yot can play dvd by connectind dyd in audio &video socket without disturbing cable. a/v wire comes with dvd socket is in your tv

Sep 13, 2007 | Sanyo DS13204 TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73691 Answers

 Grubhead
Grubhead

Level 3 Expert

5017 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Sanyo Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...