Question about Samsung Refrigerators

1 Answer

Samsung refrigerator freezer model RF4287 has OF codes showing on both freezer and refrigerator. Cannot reset by unplugging for 3 seconds or pressing codes for three seconds. How can this be fixed

Samsung refrigerator freezer model RF4287 has OF codes showing on both freezer and refrigerator. Cannot reset by unplugging for 3 seconds or pressing codes for three seconds

Posted by on

  • Doctor PC
    Doctor PC May 08, 2015

    OF means that is on DEMO mode.Press the Power Freeze and Freezer buttons at the same time for three seconds. Post back!

  • Doctor PC
    Doctor PC May 08, 2015

    Do not unplug when reset.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Samsung Master
  • 744 Answers

Hello Mary;

My name is Peter. I am a retired field service refrigeration technician.

Ok, on the left hand side of your refrigerator display board there are two selector buttons. Press on both at the same time for 3 seconds. This will take you out of the OF mode.

Posted on May 09, 2015

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 163 Answers

SOURCE: refrigerator will not cool

no there a is nothing you can do, they gonna change a card, and charge for the card and the job,now check for waranties maybe the card is on waranty...good luck

Posted on Aug 11, 2006

vanni7
  • 163 Answers

SOURCE: Kenmore Elite Trio Model 795.7757960 - Error Code 'IF'

Hi!!! You have a control board problem.Change the control board and you should be okay..Them boards did'nt come out good.Good luck..

Posted on Jan 04, 2009

Sea Breeze
  • 4654 Answers

SOURCE: Samsung RS2533SW refrigerator is not cooling.

It sounds like a defrost problem and I will help you if you need. Thanks, Sea Breeze

Posted on Jun 17, 2009

  • 1 Answer

SOURCE: Samsung double door refrigerator/freezer is not

I just had (have?) this same problem. I called out the repair man and in the end he suggested that I buy a new fridge because of all the problems reported with my model (RS2555SL) on the internet. Anyway, after a while I heard what sounded like a fan trying to spin on the fridge side. I unplugged the unit, removed the inside back panel on the fridge side. The entire coils and the fan had iced over. I removed all the ice, plugged the unit back in and it is now working. I will still replace this unit because I probably only corrected the symptom but the problem remains.

Posted on Jun 21, 2009

AGUSYUSTIARA
  • 116 Answers

SOURCE: Temperature and adjust refrigerator panel does not work.

problems exist in its electronic control panel that is damaged, this problem should be solved by replacing one block electronic circuit in the control panel. damage is usually caused by a memory of the troubled program. actually if you know you can fix the electronic control panel of the electronic circuit itself, simply replace the IC EEPROM or memory alone. follows with Cristal oscilator usually must be replaced too

Posted on Jul 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Samsung rb215abbp won't stop beeping. I recently switched the door from the right side to the left. Now my fridge says 66 degrees but is cold. Light is on only when I unplug and plug it back in.


Fridge keeps beeping or buzzing: The following is for Frigidaire models but others can be addressed similarly.

Several Frigidaire refrigerator models have an electronic control panel on the freezer door the owner can use to adjust the internal temperature, dispense ice and water and receive notification about issues such as the need to replace a water filter. The refrigerators also emit a beep for various actions and as an occasional alarm. Determining what causes the beeps necessitates some troubleshooting.
Temperature Controls ·A Frigidaire refrigerator's display panel blinks when the control panel is touched to set temperature controls. After pressing "Freezer Temp" or "Refrigerator Temp" on the keypad, press the arrow buttons within five seconds to increase or decrease the desired temperature. If you do not press the arrow buttons within five seconds after pressing "Freezer Temp" or "Refrigerator Temp" on the keypad, the refrigerator beeps to indicate the current setting will stay in place.

Door Open ·When you leave the refrigerator or freezer door open, the refrigerator beeps. Also, the "Door Ajar" indicator illuminates on the appliance's display panel. Shutting the door and pressing "Alarm Reset" stops the beeping and turns off the "Door Ajar" indicator light.
·The Frigidaire refrigerator has a control lock feature that prevents use of its control panel or dispensers when the unit is locked. When the control lock is active, a beep sounds when a keypad or dispenser is pressed. Release the control lock by pressing the "Control Lock" icon for three seconds. A beep will sound, and the icon's light will go out.
Power Reset ·A power reset is occasionally necessary if the Frigidaire refrigerator's control panel does not work normally or a reset function on the keypad does not work. A power reset involves disconnecting power to the refrigerator by unplugging its power cord from the electrical outlet, waiting 30 seconds and plugging the power cord back into the electrical outlet. When the control panel resets, a beep sounds. If the refrigerator beeps even after a power reset and the beeps' source is not known, contact Frigidaire.


Read more :http://www.ehow.com/info_12148688_cause-beeping-noise-frigidaire-refrigerator.
Cause of Beeping Noise in Frigidaire Refrigerator eHow

Sep 30, 2016 | Samsung Refrigerators

1 Answer

Samsung refrigerator alarm beeping continuously


Fridge keeps beeping or buzzing: The following is for Frigidaire models but others can be addressed similarly.

Several Frigidaire refrigerator models have an electronic control panel on the freezer door the owner can use to adjust the internal temperature, dispense ice and water and receive notification about issues such as the need to replace a water filter. The refrigerators also emit a beep for various actions and as an occasional alarm. Determining what causes the beeps necessitates some troubleshooting.
Temperature Controls ·A Frigidaire refrigerator's display panel blinks when the control panel is touched to set temperature controls. After pressing "Freezer Temp" or "Refrigerator Temp" on the keypad, press the arrow buttons within five seconds to increase or decrease the desired temperature. If you do not press the arrow buttons within five seconds after pressing "Freezer Temp" or "Refrigerator Temp" on the keypad, the refrigerator beeps to indicate the current setting will stay in place.

Door Open ·When you leave the refrigerator or freezer door open, the refrigerator beeps. Also, the "Door Ajar" indicator illuminates on the appliance's display panel. Shutting the door and pressing "Alarm Reset" stops the beeping and turns off the "Door Ajar" indicator light.
·The Frigidaire refrigerator has a control lock feature that prevents use of its control panel or dispensers when the unit is locked. When the control lock is active, a beep sounds when a keypad or dispenser is pressed. Release the control lock by pressing the "Control Lock" icon for three seconds. A beep will sound, and the icon's light will go out.
Power Reset ·A power reset is occasionally necessary if the Frigidaire refrigerator's control panel does not work normally or a reset function on the keypad does not work. A power reset involves disconnecting power to the refrigerator by unplugging its power cord from the electrical outlet, waiting 30 seconds and plugging the power cord back into the electrical outlet. When the control panel resets, a beep sounds. If the refrigerator beeps even after a power reset and the beeps' source is not known, contact Frigidaire.


Read more :http://www.ehow.com/info_12148688_cause-beeping-noise-frigidaire-refrigerator.

Cause of Beeping Noise in Frigidaire Refrigerator eHow

May 15, 2016 | Samsung Refrigerators

1 Answer

Water is coming under freezer section of Samsung RF4287 bottom freezer French Door


You have a plugged evaporator (cooling coil) drain pan opening or drain line.

Feb 06, 2015 | Samsung RF4287HA

1 Answer

How to reset a samsung refrigerator model number rs261mdpn aftthea power outage


http://www.searspartsdirect.com/partsdirect/part-number/Samsung-Parts/Refrigerator-Parts/DA41-00669A/0046/401/Model-RS261MDPNXAA/1482/0165000


this is the control board you will need for your model if unplugging the unit for 5 minutes doesn't fix the problem. If they are LED lights, then I point my finger at this. This is a plug and play board with molex connectors. Very easy to install with unit unplugged. You can manually reset the display and check for error codes by holding the top left and top right button on your user interface for 5 seconds in unison FOR 5 or more seconds after all the lights flash.

Feb 01, 2015 | Samsung 26.0 cu. ft. French-Door Bottom...

1 Answer

SAMSUNG REFRIGERATOR SHOWING CODE IE . POWER WENT OUT TODAY. HOW DO WE RESET IT?


Unplug the refrigerator for 5 minutes and plug it back. Now press "Energy Saver" and "Lighting" together and hold it for 3 seconds. It should clear the error message. Good luck!

Aug 24, 2014 | Samsung RF4287HARS French Door...

1 Answer

My refrigerator shows a code "OF" or "0F" where the temperature settings usually show, we tried to put the temperature settings back but couldn't. We unplugged the refrigerator to reset it but it sti


Cooling Off mode (also called Shop mode), is designed for use by retailers when they are displaying refrigerators on the shop
floor. In Cooling Off mode, the refrigerator's fan motor and lights work normally, but the compressors do not run, and
the refrigerator and freezer do not get cold.
To start Cooling Off mode, Touch and hold the Energy Saver button and the Power Freeze button for 3 seconds during normal
operation.
The refrigerator chime sounds and the temperature display flashes OF OF.
To cancel Cooling Off mode, Touch and hold the Energy Saver and the Power Freeze buttons again for 3 seconds.

Source: http://downloadcenter.samsung.com/content/EM/201104/20110414114919054/110323-QS_Guide-POLARIS-EN.pdf

Dec 30, 2013 | Samsung Real Stainless Steel 30 Cu Ft Side...

1 Answer

Flash 88


Stuart:

I own a Samsung Model RF267 ABPN and am experiencing the exact same problem. If you go through the fixya Web site you will find this is a fairly common problem with the Samsung Refrig. There are 4 schools of thought:
1. Press and hold power freeze and power cool buttons at same time for 10 seconds to reset.
2. Press and hold the Energy Saver and Lighting buttons at he same time for 8-10 seconds.
3. Unplug the unit for 10 minutes and plug it back in.
4. Replace electronic circuit boards (for example the main board found in the backof the unit or a board that controls the dislay found in the door.
I would be interested in how your unit responds to #1 or #2.
Good Luck
R Joslin

May 23, 2013 | Samsung RF265AA Bottom Freezer French Door...

1 Answer

My refrigerator display shows "Of" how do I get it to normal when I reset the temp for the fridge or freezer the display goes back to "Of"


I just had the same problem with my Samsung. OF means it is in demo mode. On my fridge I had to press "Energy Service" key and "Power Freeze" key simultaneously for at least 3 seconds to bring the fridge out of demo mode. Hope this helps.....

Jan 28, 2013 | Samsung Refrigerators

1 Answer

Samsung refrigerator rf4287 power out for 5 days when power came back up display screen flashing 1 (or I ) and letter E


The IE error code is actually 1E. That stands for freezer sensor error. The sensor is reading open or shorted to the main pcb. You need to check the wire connections, from the sensor to the main pcb. I provided you a sensor temperature chart and wiring schematic on the images below. You will need a multimeter to perform the voltage checks. I hope this helps.
Image 1
Image 2
Image 3

Nov 02, 2012 | Refrigerators

2 Answers

My Samsung refrigerator will not cool


Call Samsung. I had the same problem when Best Buy delivered mine. The delivery people left the fridge in demo mode. The people at Samsung will talk you through it, it is very simple. The fridge should work fine then.

Jun 22, 2008 | Samsung RF265AA Bottom Freezer French Door...

Not finding what you are looking for?
Refrigerators Logo

Related Topics:

483 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Refrigerators Experts

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Charles T Nevin
Charles T Nevin

Level 3 Expert

4066 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Samsung Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...