Question about True Freezers

Open Question

ERROR CODE 99 AND P1 - True Freezers

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

SAMSUNG REFRIGERATOR MODEL RS267 ERROR CODE 5E


Error code 5 E : Ice Maker Function Error - Ice-ejector and level failed three times or more. May simply be a trapped piece of ice which is not too rare a problem especially if the freezer door is left open too long.The ice pieces will stick to each other. It may dislodge itself or if the problem persists you may have to de-freeze it ( letting the freezer defrost over night.)

Jun 27, 2014 | Samsung RS267TDRS - 26 cu. ft. Side by...

1 Answer

Error code 8


Good Afternoon Glenda, thank you for your inquiry!

Is it possible that the error code is missing characters? According to my research 8 is not a valid error code. The number 8 is more like a temperature setting, however to be certain, let's try resetting the appliance. It is important to wait roughly ten minutes and then turn the unit on. Set the correct temperature and please allow 24 hours for the temperature to stabilize. The error code should clear and the unit resume to normal operations. I ask that you please follow up with a comment on the post, at your convenience, to advise if further troubleshooting is needed or if the unit's status has changed successfully.

Best regards!

Sep 10, 2013 | Frigidaire Freezers

1 Answer

Everest freezer esf1 error 3


I think that code is a mechanical error code. Not sure. Call the mfr and see what they say. You can google the code and model number and perhaps get it there.

Feb 25, 2013 | Everest Refrigeration Freezers

1 Answer

Error code FF on LFUH2157lm2


Follow through with google punch in code and model.

Feb 09, 2013 | Frigidaire 20.3 Cu. Ft. Frost-Free Upright...

1 Answer

P-1 flashes in temperature display


P1 is a probe fault on the control probe. Check it's not damaged or got water in the end.Check the connection to the controller. If all good, replace probe.

Apr 20, 2012 | Freezers

1 Answer

P-1 code is flashing on temperature display


P1 is almost always a fault on the sensing (control) probe. Check it's end is not wet or covered in thick ice, and check the connections at the controller. If you can, change the probe connections on the controller temporarily. If P2 then shows it proves the probe is faulty. If P1 still shows, it proves the controller is at fault.

Apr 20, 2012 | True 72 cu. ft. / 2039 liter Commercial...

1 Answer

My true freezer temperature gage has a P1 flashing code


If unit keeps proper temp. then I would think that either the thermometer sensing probe may have been damaged during the repair process or the thermometer itself has failed.

May 13, 2010 | True Commercial Freezer TM74F

1 Answer

My true freezer temperature gage has a P1 flashing code


Have a look at the Make and model of your thermostat and download the Instructions from the internet or give ur local refrigeration mechanic a call and ask him they are easy to set

Mar 23, 2010 | True Commercial Freezer TM74F

Not finding what you are looking for?
Freezers Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top True Freezers Experts

Dennis Boxerman

Level 3 Expert

1037 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Are you a True Freezer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...