At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Getting vertical lines on scanned pages when duplex scanning on canon dr-3080c II scanner Only on duplex side of pages, though. Front page still shows up clean.
Actually, I found a differnet solution. I ran the calibration sheet through the machine, and this corrected the isue. Thank goodness I didn't toss that out!Actually, I found a differnet solution. I ran the calibration sheet through the machine, and this corrected the isue. Thank goodness I didn't toss that out!
AnonymousMar 22, 2014
ble (cyan) lines on scanningble (cyan) lines on scanning
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The Canon DR-3080C is only color on the front side. The back side is monochrome only. The next model, which was the DR-3080CII will do double sided color scanning
The top module has dirt stuck and bottom module is clean. Please clean the scan module with Isopropyl alcohol. For emergencies take a drop of cologne on a piece of cloth and wipe the area that is dirty.
What Scanning software are you using? If CapturePerfect, there is an option to detect double page. Once you select this, the scanner will STOP, if two pages are sucked in and the panel will display "d04" indicating double page. Also Wipe all the rollers with a well wrung damp cloth for every 2000 pages to remove paper dirt.
S. Mohan, Chennai, India
Check your scanner software settings. It is probably set at duplex ever time you start to scan. That is why you get two pages for every pass, the front and the back. You must place the document in the feeder in a way that the front side of the document is page 2. You may want to flip it next time you scan. So the main question is why there is black line from top to bottom? That is because there is a piece of dirt stuck on the glass of the scanner. You see, this scanner actually does two scanning when a page runs through it: the front and the back in duplex mode. So there are two scanners in side the box. The front page scanner apparently is dirty and needs to be cleaned with clean cloth and lens cleaner.
Check the brightness setting. Try keeping at close to the maximum and scan. If it is still black, may be the lighting module or Scan module is affected. Check for any loose connections.
S. Mohan
The thick line is either because of dust sticking to the glass or a module problem. Try different brightness settings and scan white paper. If the thickness varies and also the sides of the black strip are jaggered (step like) then it is dust on Glass. use isopropyl alcohol to clean, dont use solvents. If the teickness is same for all levels of brightness and has a sharp edge always, it could be scan module problem.
S. Mohan
I think this is rubber roller problem. Obviously, the scanner cannot find out which is the last page. If the paper available is less, the roller is not pulling the last few sheets.
S. Mohan
Actually, I found a differnet solution. I ran the calibration sheet through the machine, and this corrected the isue. Thank goodness I didn't toss that out!
ble (cyan) lines on scanning
×