Question about Kodak Hero 7.1 Wireless All-in-One Printer

1 Answer

Poor print quality

Have changed Ink cartridges, Have unplugged printer. Still looks bad.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 4 Answers

KODAK HERO 7.1 All-in-One Printer - Extended User Guide, you can try to find answer in their site, their support will help you

Posted on Apr 17, 2015

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 30 Answers

SOURCE: print quality

Your printhead might be dead. Call Kodak tech support and they will give send you a printhead with no charge.

Posted on Feb 08, 2008

ronaldsuboc
  • 449 Answers

SOURCE: Printer doesn't print well

hi!!!!

try to open and
remove the cardtridge and
clean up the nozzle use alcohol
and cooton buds


Posted on Nov 07, 2008

  • 2 Answers

SOURCE: Kodak 5100 aio; banding/streaking problem

You will need a new printhead. If its not under waranty good luck trying to find one.

Posted on Jul 14, 2009

Josue Pongco
  • 154 Answers

SOURCE: printing quality poor

Try this one, Turn on the printer, Take out the inks, remove the
printhead, put back the printhead make sure it will snap and you hear a
click, put the inks back, wait for the printer to initialize, Press the
Menu button, look for Calibrate printer, then print calibration page,
then scan it after. Load a regular paper. Then try to print a demo page
If
same problem persist call this no for further assistance 1800 421 6699 Thanks

Posted on Aug 15, 2009

  • 15 Answers

SOURCE: Kodak 5100 AIO won't print after cartridge change

the red blinking light indicates that your printer wont recognize your ink carthridge. you can try to reseat the carthridge and the printhead. to remove the printhead just press on the release tab which is located on the upper left corner of the printhead wall. If this will not correct the issue, you need to call their technical support hotline. maybe the carthridge is faulty or there is a problem on the printhead. their hotline no is 1 800 421 6699

Posted on Aug 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Canon ip4850 print quality


Whats the question?? if poor quality printing, it could be dirty ink cartridges, dirt on the print head, poor quality paper ??? try looking at the printer settings, sometimes they may be set to economy rather than top quality printing.

Feb 18, 2015 | Canon IP4850 Inkjet Photo Printer

1 Answer

Poor quality black in printing


If you touched the electrical contacts on the cartridge the high voltage used could be taking a shorter path to ground. Try cleaning the contacts on the cartridge and inside the printer with a lint free cloth and some 99% isopropyl alcohol then wipe dry.

Nov 05, 2013 | Epson Office Equipment & Supplies

1 Answer

Epson xp-405 wont print black very good


No, It could be that the copper/metallic plate that interfaces with the cartridge and/or the carriage could be dirty. Remember that the ink is heated to produce the steam which is necessary to push the ink out of the cartridge. That spray doesn't just go down. It atomizes the ink so it sprays everywhere. You may need to clean those contacts with 91-99% Isopropyl Alcohol and use a coffee filter. The white filters are cheap, lint-free, and durable. Please turn off the printer and unplug it before you use any liquids on the contacts!!!

Nov 05, 2013 | Canon PIXMA iP1500 InkJet Photo Printer

1 Answer

Lexmark 730 not printing


Regarding the Lex1 cartridge's no printing/severe fade (or similar) during printing, my answers are provided below:

For the poor print quality problem (degraded image quality) you are observing, we suggest you first visit the "Print Quality" page of the "General Information" section of the Inkjet 411 website and follow the suggestions provided: http://inkjet411.com/?page_id=1432

A. 1. Cartridge & Printer maintenance should also be evaluated - ensure both ink cartridges and flexible driver contact cables (where the cartridge interfaces to the carriage inside the printer) are thoroughly clean: http://inkjet411.com/?page_id=1519

A.2. Perform a hot-water flush on the suspect ink cartridge, refer to video procedure here: http://inkjet411.com/?page_id=1519

A.3. Run a quick test print to evaluate cartridge performance (i.e. 4-color test print):
http://inkjet411.com/?page_id=146

For information on North American ink refill services (for Lexmark 1, 2 and 3 ink cartridges) at a major retailer near you (should you wish to save ~50% on ink costs), general printing problem resolutions or advanced Lexmark printer diagnosis procedures (advanced cartridge diagnostic tests/cartridge error bypass & printer reset methods, etc.), please visit Inkjet411: http://www.inkjet411.com

Jul 16, 2013 | Lexmark Office Equipment & Supplies

1 Answer

My printing is so poor


if your printer is printing poor quality photos i would recommend changing out the ink cartridges and probably getting a new hd printer
hope this helps!

Apr 09, 2012 | Zebra Office Equipment & Supplies

1 Answer

Having trouble fitting new ink cartridge


Hi, when an ink cartridge runs low in your HP Officejet 5610 All-in-One printer, you will see a message on the printer's display screen. Faded-looking text or pictures also indicate low ink. Ensure print quality by replacing ink cartridges when they run low.

Instructions

Things You'll Need:

* HP #27 or #56 black, #22 color or #58 color photo print cartridge, or compatible equivalent



Turn printer on if it is off. Never attempt to change the ink cartridge if the printer is off. If it is off, it will not properly position or release ink cartridges, and attempting to change the ink cartridges may damage the printer.


Open the print-carriage door, located on the right side of the printer. The print carriage will automatically move into the access area.

Push down on the top edge of the cartridge you are replacing to pop it out of its slot. Remove the print cartridge and discard or recycle.


Pull off the protective tape on the new print cartridge using the pink tab. Do not touch any part of the cartridge except the black plastic. Touching the contacts or ink nozzles under the protective tape can damage the cartridge and result in poor print quality.


Hold the cartridge upright and push gently forward into the empty ink cartridge slot until it clicks.


Close the print-carriage door.

You can also use this video clip to learn more:

youtube.com/watch?v=wVXUndG-o_Q.

Please don't forget to rate me thanks.

Thanks for using fixya...

Oct 26, 2010 | HP Officejet 5610 All-In-One InkJet...

1 Answer

Streaky printing


Hi,
At most cases of printer, especially which have done refill at cartridge, print quality is poor or streaky. Many factors influencing this printed result. To overcome print quality is poor, maybe following tips can usefull to prevent printed pages are missing lines or streaky.

First step is ordinary to be done many people when print quality is streaky that is doing cleaning. To get good printed result, sometime this facility is used more than once.
Use Ink Refill with Quality Nicely
For printer have refilled, sometime the quality of printing is also influenced by ink. If will fill your printer again, use ink which the was quality of nicely. I have tested some refill inks at cartridge which have been ascertained still nicely ( sorry: I do not want to publicize result of this attempt). In the reality result make me surprise, there ink of refill making the printed quality is crummy. To choose ink refill read following tips :
  • See viscosity of ink, every merk of ink refill have difference of viscosity. Don’t use Ink refill too jell. Difference of this viscosity is no measure reference viscosity of ink from factory maker of printer
  • Don’t fear to try some inking merks. Done this, you’d find refill ink fitt with your printer. I now only using one merk of refill ink ?.
  • This suggestion of forum, but I still not yet proved. May believe or not. Good ink aroma of soft usually.
Change Original Cartridge
This is last choice. A lot not like to do this ways, because price of original cartridge still costly. Alternative, you can use compatible cartridge which the was price of cheaper than original cartridge. At newest printer, usually there are two until four cartridge in one printer. And price four same cartridge almost at the price of printer even there are some costlier.

Let me know !

Thanks

Fame !

Apr 02, 2009 | Canon PIXMA MP130 All-In-One InkJet...

2 Answers

WHILE TRYING TO FIGURE OUT WHY MY PRINT QUALITY IS SO POOR. AFTER CLEANING THE HEADS A FEW TIMES I WENT TO PRING A "QUALITY TEST PAGE". The MFC said i was out of paper. i refilled the paper (with the...


the messages you get for cartridges other than the original are not trustful. You will get the right reading for original(from Brother) cartridges. Some ink is poor for printing photo quality.

not any refillable ink is right for printing photos, sometimes too dark, sometimes you don't get the right mix of colors.


Mar 30, 2009 | Brother MFC-5840CN All-In-One InkJet...

1 Answer

Poor color printing quality


do you have the canon print management software installed? it's located in the maintenance tab on that software.

www.canon.com has that by model number

Jun 16, 2008 | Canon PIXMA iP3000 InkJet Photo Printer

2 Answers

Printer problem with 6210 all in one.


Try to print a self test page from the printer itself, do these:
  1. Press and hold the Cancel and the Color buttons at the same time.
  2. Release both buttons.
  3. The Self Test Report will be printed.
and check if it is the same output, if yes then follow the steps below:
  1. Some of the ink cartridge ink nozzles may be clogged with dry ink. Use the ink cartridge cleaning service to try to clear them. Follow the steps below:
  2. Verify that there is plain white paper in the Input tray.
  3. Press Setup .
  4. Press c00712200.gif or c00712201.gif to select Tools and then press OK .
  5. Press c00712200.gif or c00712201.gif to select Clean Print Cartridge and then press OK . The unit prints a test page.
  6. Examine the test page. If the print quality of the page is good, stop here. If the print quality appears to be getting better, run the Clean Print Cartridge utility again
  1. If the self test appears better, Increase the copy quality setting (Normal or Best) and try copying again. If the quality is still poor, continue to the next step.
  2. If the quality is still poor, one or more of the cartridges may be low on ink or empty. Follow the steps below to check the ink levels.
  3. Open HP Solution Center .
  4. Click Settings .
  5. Click Print Settings .
  6. Click Printer Toolbox .
  7. Click the Estimated Ink Levels tab
  • Replace any ink cartridge that is low on ink.
  • If the ink levels are not low, clean the cartridge face and electrical contacts at the back of the print carriage.
    1. Open the front of the unit to access the ink cartridges.
    2. After the ink cartridges are at the center, unplug the power cord from the back of the unit, and remove the ink cartridges. The power cord must be removed to ensure that the unit is not damaged during the cleaning process.
    3. Clean the cross-hatched area of the ink cartridge with a soft clean cloth that is slightly dampened with clean water to remove any build up. Avoid cleaning the ink cartridge nozzle plate. Cleaning this area can force foreign matter into the ink nozzles and plug them.
  • With a soft lint free cloth slightly dampened with clean water, clean the copper-colored contacts on the back of the ink cartridges.
  • Allow the cartridges to dry before reinserting them.
  • Close the unit, and plug the power cord back in.
  • Print a self-test page to check the results. Follow the steps below to print a self-test page.
    1. Press Setup .
    2. Press c00712200.gif or c00712201.gif until Print Report displays and then press OK .
    3. Press c00712200.gif or c00712201.gif until Self-Test Report displays and then press OK . The self-test report prints.
    If the problem is not corrected by cleaning the ink cartridges, replace the ink cartridge(s).
    IF THE SELF TEST REPORT IS CLEAN, THEN TRY TO PRINT FROM ANOTHER SOFTWARE LIKE PAINT, NOTEPAD AND IF THE OUTPUT IS OK THEN THE PROBLEM IS ON THE SOFTWARE THAT YOU ARE USING

    Dec 19, 2007 | HP OfficeJet 6210 All-In-One InkJet...

    Not finding what you are looking for?
    Kodak Hero 7.1 Wireless All-in-One Printer Logo

    Related Topics:

    51 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Kodak Office Equipment & Supplies Experts

    Les Dickinson
    Les Dickinson

    Level 3 Expert

    18394 Answers

    Doctor PC
    Doctor PC

    Level 3 Expert

    7733 Answers

    Cindy Wells

    Level 3 Expert

    5124 Answers

    Are you a Kodak Office Equipment and Supply Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...