Question about Kenmore Elite 22.4 cu. ft. Bottom Freezer Refrigerator with Adjusta Cube Ice Maker

2 Answers

What is 1F code on kenmore elite refrigerator

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Filmmaker:

    Uploaded 5 video answers.

  • Expert
  • 49 Answers

I can understand how frustrating it is to have issues with your refrigerator. The error code ER IF means that the main control board lost a feedback signal from the icing fan motor for over 115 seconds. This fan is located in the rear of the freezer section, on the left side of the fan cover. The fan supplies cold air for the compartment where the icemaker is located. The error code may be cleared by disconnecting power to the refrigerator for about 3 minutes, then plugging the unit back in. The code will be cleared, but may come back if the icing fan does not start running. If the error continues to come back after the power has been reset. There may be ice formed around the fan housing preventing the fan from running. The fan cover can be removed, but is time consuming and difficult. You could just unplug the unit for 24 hours and leave the doors open. This will allow any ice build-up to melt and return the unit to proper operation.

Posted on Apr 17, 2015

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 40 Answers

The Er IF error code indicates that the main control board detects that the ice compartment cooling fan is not working. This will cause a lack of cooling in the ice compartment and will normally result in no ice production. This is something that a service technician will usually need to correct.

Posted on Apr 17, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a Kenmore Elite Refrigerator that has ER 1F on the display. Where can I find a manual with error codes or can you tell me what this means?


Hello Ken;

My name is Peter. I am a retired field service refrigeration technician.

The 1F code means there is a communication problem between the control board and the freezer fan.

Your freezer fan my have failed or it my be blocked by ice build-up.

So, It is one of these parts:
1.) Freezer fan motor
2.) Defrost heater
3.) Defrost timer.

You did not provide a model number so I can not provide you with parts numbers.

Although, I am retired, I do maintain a small customer base. If you live near Glen Burnie, MD, call me 443-306-1362

Dec 15, 2014 | Kenmore Refrigerators

1 Answer

Error message Er 1F


Maybe this will help. i would check fan first and see if ice has built up in fan.
https://www.youtube.com/watch?v=a4MdwuoN3jc

May 26, 2017 | Kenmore Refrigerators

1 Answer

Managemylife


That error comes from a failing fan due to ice build up which directly affects your ice maker.

Feb 26, 2014 | Kenmore Refrigerators

1 Answer

I have the Kenmore Elite Model # 795.79773.901 and I keep getting Er 1F. What does that mean and what do I do to fix it?


Hi and welcome to FixYa, I am Kelly

I hate to just paste a link to the answer but this answer is quite thorough:
http://www.managemylife.com/mmh/questions/116713-getting-er-lf-fault-code-kenmore-elite-refrigerator

If you have frost build up in the freezer compartment it can impede operation of the fan. Frost build up is usually a secondary symptom of an automatic defrost system problem. i.e it is not defrosting... due to a failure of one of the following:
-defrost heater
-defrost thermostat
-defrost control

Hold the door light switch depressed and see if the light goes out and that the fan is running.

If the fan has failed the part number is around $60.00 usually. There are AC and DC fans in this unit.
Your parts can be found here:
http://www.searspartsdirect.com/partsdirect/part-model/Kenmore-elite-Parts/Refrigerator-Parts/Model-79579773901/0583/0161000/F1104078/00002?blt=06&prst=0&shdMod=79579773901

Thanks for choosing FixYa,
Kelly

Jul 21, 2011 | Kenmore Side by Side Refrigerator

1 Answer

Error code 1F


That would be you need to replace the icemaker fan motor.

Nov 26, 2010 | Kenmore Elite 22.4 cu. ft. Bottom Freezer...

1 Answer

I have a Kenmore Elite Refrigerator, Model No. 795.77573600. The ice and water dispenser give the error message Er 1F. In searching online it appears that this problem is related to the ice compartment...


This is an error code for the icemaker fan motor.
If the control does not see a signal coming back from the fan motor you will get this error code.
Please see the image below from the service manual that explains the ER IF error code.

http://media.fotki.com/1_p,wkbwtkdqbqkgrkkxgtqsskgwtqkq,vi/ktfgsrbbdxktrrwffdr/1/1303472/5961857/image18067img-or.jpg

The ER IF code indicates a failure of the icing fan.

You may notice slower ice production but the other fans should be okay.

You can select the ultra ice option and see if the fan toggles on.

The fan or the control is bad.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Aug 25, 2010 | Kenmore Elite 22.4 cu. ft. Bottom Freezer...

2 Answers

My Kenmore Elite 79577563600 is showing Er 1F. What does that mean? I cannot adjust temp or ice or anything.


This is an error code for the icemaker fan motor.
If the control does not see a signal coming back from the fan motor you will get this error code.
Please see the image below from the service manual that explains the ER IF error code.

http://media.fotki.com/1_p,wkbwtkdqbqkgrkkxgtqsskgwtqkq,vi/ktfgsrbbdxktrrwffdr/1/1303472/5961857/image18067img-or.jpg

The ER IF code indicates a failure of the icing fan.

You may notice slower ice production but the other fans should be okay.

You can select the ultra ice option and see if the fan toggles on.

The fan or the control is bad.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.#@%

Apr 07, 2010 | Kenmore Elite 22.4 cu. ft. Bottom Freezer...

Not finding what you are looking for?
Kenmore Elite 22.4 cu. ft. Bottom Freezer Refrigerator with Adjusta Cube Ice Maker Logo

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Refrigerators Experts

Sal DeAngelo

Level 3 Expert

2122 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Cindy Wells

Level 3 Expert

5097 Answers

Are you a Kenmore Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...