Question about Pool & Spa

Ad

33 ft x 18 ft x 1.75 ft = 1,039.5 cubic feet. 7.48 gallons per cubic foot. There are 7,775.46 gallons to be filled.

Posted on Apr 17, 2015

Ad

Hi there,

Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Length x Width x Average Depth x 7.5 = Total gallons

Diameter x Diameter x Average Depth x 5.9 = Total gallons

Length x Width x Average Depth x 5.9 = Total gallons

Shallow End Depth + Deep End Depth Divided by 2 = Average Depth

Jun 18, 2017 | Pool & Spa

Basic school maths Pi R Squared, but are you sure this pool is 35 FEET deep?

Pi, (3.142) x radius squared

the radius is half the diameter x itself, x depth. and then

**T**here are 7.48 gallons in cubic foot

Your pool diameter is 15' diameter, so 7.5 radius. 7.5 x 7.5 is 56.25. Multiply that by the depth. Multiply that answer by 7.48 gallons

Area of Circle

Pi, (3.142) x radius squared

the radius is half the diameter x itself, x depth. and then

Your pool diameter is 15' diameter, so 7.5 radius. 7.5 x 7.5 is 56.25. Multiply that by the depth. Multiply that answer by 7.48 gallons

Area of Circle

May 25, 2016 | Pool & Spa

What you looking to know?

Square feet suggests a flat area, like the floor plan of the pool, which would be 16 x 32 = 512 square feet. Like you'd measure walls for tiles or paper etc.

As you've given 3 dimensions, sounds like your after the cubic capacity/volume of the pool, in which case your looking at cubic feet (same as flat area above, but with the added depth to go from flat 2d, to 3d (2 vs 3 dimensions)), which would be 16 x 32 x 10 = 5,120 cubic feet.

Square feet suggests a flat area, like the floor plan of the pool, which would be 16 x 32 = 512 square feet. Like you'd measure walls for tiles or paper etc.

As you've given 3 dimensions, sounds like your after the cubic capacity/volume of the pool, in which case your looking at cubic feet (same as flat area above, but with the added depth to go from flat 2d, to 3d (2 vs 3 dimensions)), which would be 16 x 32 x 10 = 5,120 cubic feet.

Jun 02, 2015 | Pool & Spa

not possible to calculate with the information provided. here is a basic formula to get you close.

length x width x average depth x height in feet x 7.5 gallons / cubic ft

length x width x average depth x height in feet x 7.5 gallons / cubic ft

Aug 30, 2014 | Pool & Spa

18,600 gallons (length x width x depthx 7.51 =gallons)

Aug 23, 2014 | Pool & Spa

What you appear to be asking is the volume of your Pool in gallons! Here is the formula and resulting answer:

Length X Width X average Depth X 7.5 (for rectangluar) (or 5.9 for a circle or oval)

You need to know 3 values:

The overall length in feet (assuming 42 on your note)

The overall Width in feet (assuming 16 on your note)

The average depth, take a depth measurement at 3-4 locations equally apart along the length from deep to shallow (or vice-versa) (example might 8ft, 6ft, 4ft, 3ft) add these measurements together and then divide the total sum by the number of depth measurements (example 4) this will be the average (example 5.25)

So the resulting formula would read 42 x 16 x 5.25 x 7.5 = 26,460 gallons for the example

So if your pool's average depth is about the same, then your volume is rounded to about 26,500

Your shock product should clearly state how much one bag will treat a given volume (example 10,000 gals) for regular treatment or shocking. Usually shocking involves doubling or even tripling the normal maintenance dosage, but check the product labels and instructions for manufacturer's recommendation.

Length X Width X average Depth X 7.5 (for rectangluar) (or 5.9 for a circle or oval)

You need to know 3 values:

The overall length in feet (assuming 42 on your note)

The overall Width in feet (assuming 16 on your note)

The average depth, take a depth measurement at 3-4 locations equally apart along the length from deep to shallow (or vice-versa) (example might 8ft, 6ft, 4ft, 3ft) add these measurements together and then divide the total sum by the number of depth measurements (example 4) this will be the average (example 5.25)

So the resulting formula would read 42 x 16 x 5.25 x 7.5 = 26,460 gallons for the example

So if your pool's average depth is about the same, then your volume is rounded to about 26,500

Your shock product should clearly state how much one bag will treat a given volume (example 10,000 gals) for regular treatment or shocking. Usually shocking involves doubling or even tripling the normal maintenance dosage, but check the product labels and instructions for manufacturer's recommendation.

Aug 04, 2011 | Intex 15' X 42" Easy Set Pool Complete...

Depends ... 15 feet round? 36 inches deep? = 3976 gallons

15 feet by 36 feet rectangle, how deep? if 5 feet deep = 20,250 gallons

Hope this addresses your question.

Thanks for your interest in FixYa.com

15 feet by 36 feet rectangle, how deep? if 5 feet deep = 20,250 gallons

Hope this addresses your question.

Thanks for your interest in FixYa.com

Jul 10, 2011 | Intex Easy Set Pool 15x36

Thank you for posting your question here on Fixya.com.

32' round by how deep? Flow rate is how you size a filter so with total gallons you can calculate how many per minute will add up to the whole pool being turned over is 6-8 hours. The pump and filter are then sized for that required flow...Assuming the pool is an above ground ~4' average depth then total gallons would be about 24,000 gallons. For an 8 hour turnover you would need about 50 gallons per minute. The 210T, T for top mount, is designed to handle up to 44 gallons per minute and turn over a 21,000 gallon pool in 8 hours or a 26,000 gallon pool in 10.

What that basically means is that using a 210 on a pool 32 x 4 would be pushing it. It will work but you will end up backwashing more frequently which raises the overall cost of running the pool. If it is not to late a 24" filter would be better; especially if you have periods of time in your pool season where heavy amounts of debris such as pollen get into the water. A 21" filter won't handle any over a normal filtration load.

If this answer does not fix your problem, please comment with additional details prior to rating the answer. You may also contact me thru our website at www.arrowpools.net. Positive feedback is appreciated once your problem is solved!

Apr 28, 2011 | Hayward Pro Series 21" Above Ground Pool...

It will hold ~1175 gallons assuming it is filled to 24" deep. The formula is pi x radius x radius x depth x 7.48.

John

John

Mar 14, 2011 | Intex "" Metal Frame Pool Set (56998e)...

This blog has information about sinking an above ground pool. It is normally recommended that you do not sink the pool entirely into the ground becuase of pressure concerns and the risk of collapse. Generally, you leave 1-3 feet of the pool above the ground and install a deck or similar feature to make the pool appear to be in the ground. The type of pool liner that you have (expandable) is best for this practice, but it can be done with overlap or regular beaded liners also.

http://backyardcity.wordpress.com/2009/06/02/the-above-ground-pool-goes-underground/

http://backyardcity.wordpress.com/2009/06/02/the-above-ground-pool-goes-underground/

May 08, 2010 | Intex 18 ft x 48" Easy Set Inflatable...

55 people viewed this question

Usually answered in minutes!

×