Question about Samsung Televison & Video

2 Answers

How do i fix samsung

Only red led dont open

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Samsung Master
  • 73,647 Answers

Fault in the main power supply regulator board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

Posted on Apr 16, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Samsung Master
  • 670 Answers

Hi Petsotas,
Red led means your tv has completed the first step of operation and is ready to take off. If the tv does not respond to "power on" command, It is the second step the tv is unable to complete and so is the present problem. Power supply as well as the main board may be responsible for this fault. Please consult the TV tech because there is nothing you can do yourself about it.

Posted on Apr 16, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Do not my printer initialize & red light glow


LP-365W On Line LED Is Solid Red - samsung product ...

support-us.samsung.com/.../pop_troubleshooting_fr...

Samsung ElectronicsImportant: Before you perform any type of service on your printer that requires you to... Any of these conditions can cause the On Line LED to glow solid red:.

On Line LED Is Solid Red

support-us.samsung.com/.../pop_troubleshooting_fr...

Samsung ElectronicsDec 2, 2014 - Important: Before you perform any type of service on your printer that ...Any of these conditions can cause the On Line LED to glow solid red:.

Samsung ML-3561N Laser Printer Initialize - Questions - Fixya

www.fixya.com > ... > Samsung > ML > Samsung ML-3561N Laser Printer
ML-2570 Samsung printer having problem orange LED is blinking ... initializing stage green LED glows continuosly,After initializing Printer green LED turn into ... the red light remains on when i switch on the printer.. and it doesnt initialize the ...

Samsung glow plug Printers & Copiers Questions ... - Fixya

www.fixya.com > Forum > Tags > glow plug > Printers & Copiers
Printer Problems...red status light glowing I bought a Samsung CLP-310W a ...Samsung printer having problem orange LED is blinking in initializing stage ...

Reset for Samsung ML-1660 ' FixYourOwnPrinter


Dec 19, 2015 | Samsung ML 1610 Laser Printer

1 Answer

Led tv repair


I have the exact same problem on my samsung le40a552p3xxc version c03. Samsung uses bad capacitators on these models i think, which causes the power supply to fail after a few years. I hoped to find a mainboard, but as i read here, they dont make em anymore :s. Now i have to buy the equipment to fix this problem my own..wish me luck..Gonna change the first capacitators in my life :)

Apr 29, 2013 | Samsung Televison & Video

1 Answer

My samsung LED TV turns on sometines and other times the red light stays on and won't respond to remote control


leave the tv disconnected for a while because if you keep messing with it like my kids did and it will cause the bulb inside to burn out and will not even be worth fixing

Dec 13, 2011 | Televison & Video

1 Answer

My newly installed Samsung CLP-310 has a red light showing next to the <...> icon. Please could you help me to resolve the problem. Thx


Hi paulette,
if the light is red and TONER COLORS LED all LEDs off

• The machine is experiencing an error, such as jammed paper, open cover, empty paper, installed waste toner container, or full waste toner container.
• The machine is experiencing a service required error, such as LSU error, fuser error, or Contact your sales or service representative.

if the light is red and TONER COLORS LED each LED lights red.

• Each toner cartridge is totally exhausted. You can not print.
• Each toner cartridge is wrong.

Aug 01, 2011 | Samsung CLP 300 Laser Printer

1 Answer

Why is red light on samsung clp- 315 and it is not printing


Does one of these situations apply to you?

The Status LED light is Red and the Toner lights are OFF (Check Smart Panel for message)

  • A Paper Jam has occurred.
  • The Front, Top, or Back Cover is open.
  • There is no paper in the Paper Tray.
  • There is a problem with the Waste Toner container.
  • A major error has occured.

The Status LED light is Blinking/Flashing Red and the Toner light(s) are Red

  • The Toner cartridge(s) that are Red need to be replaced. (Can still be used to print, but quality is unreliable)

The Status LED light is Red and the Toner light(s) are Red

  • The Toner cartridge(s) that are Red need to be replaced. (Printing is not available)
  • The Toner cartridge(s) are not installed properly.
Source: samsung troubleshooting guide for CLP-315

Sep 25, 2010 | Samsung CLP 315 Laser Printer

1 Answer

Red light on all the time will not print Samsung ml-1640


Depends which LED light is red. The upper one with two symbols is the error LED, while the lower one is the toner LED.

If it's the top LED, then it could be a number of issues, such as an open cover or some software problem. Could be an LSU error. Try updating the driver and firmware.

If it's the bottom LED, then your toner is probably finished (or has hit the 2100 mark). Try redistributing the toner by giving it a little jiggle, or just change the whole thing.

Apr 05, 2010 | Samsung ML-1640 Monochrome Laser Printer

2 Answers

Samsung printer ml 1510 red light flashes after self test


Red Error Light Stays On The following conditions can cause the On Line LED to glow solid red:
  • Printer paper is jammed inside your printer.
  • A cover is not be closed properly.
  • The toner cartridge is not inserted properly and needs to be reinstalled.
  • The toner cartridge is running low.
  • There is no paper in the paper tray.
  • The paper inside the paper tray is not be installed correctly.
Red Error Light Blinks If your printer's On Line LED is blinking red, your printer's toner is exhausted and needs to be replaced. On Line and Error Light Blink Simultaneously
If your printer's On Line and Toner Save LEDs blink simultaneously, your printer requires service.

You can go to samsung online service request http://www.samsung.com/us/support/repaironline/supportOnlineServiceRequest.do

Mar 21, 2009 | Samsung ML 1510 Laser Printer

1 Answer

Samsung LED DLP 50" has a green cast on entire screen on all inputs. It cycles to red then back to green. Customer adjustments no effect. I assume the light assembly needs replacement. Any guidance...


you may have blown caps take it to a repair man and let them fix it so you dont jave to troubleshoot everything...they usually know right away what the problem is

Sep 17, 2008 | Samsung Televison & Video

Not finding what you are looking for?

Open Questions:

Televison & Video Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73647 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...