Question about Coffee Makers & Espresso Machines

Open Question

Jura impressa z6 made a popping noise while rinsing ....now when I press to rinse no water comes out instead it leaks from the bottom thanks

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 13 Answers

SOURCE: On Rinse nothing comes out?

Do you seem to end up with more water in the tray now then you did before this problem started? Does your coffee seem weaker then before? If so I have some ideas for you.
Mike

Posted on Jul 05, 2009

Ad
  • 13 Answers

SOURCE: Jura Impresso E9 not dripping through spouts but into drip tray

This is most likely due to a bad o'ring. The bar you speak of...Does the unit have a small spout pointing upward from the area?...with a groove? Is the o'ring in that groove damaged or missing? When the grounds are compressed in the piston, the brew unit lowers down onto this spout and seals on it. The high pressure water then is injected upward inot the brew unit. When this seal fails the water simply leaks into the tray when there are grounds providing backpressure. When rinsing and no backpressure some of the water may be getting through. Make sure you lube up any seals with a food grade lube. Olive oil will work in a pinch.

Mike

Posted on Jul 08, 2009

blueextc3221
  • 15935 Answers

SOURCE: Jura Impressa F7 rinse will not push water through the heads.

Thanks for your question!

I'm sorry that you haven't received an answer yet.

The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:
1. the question is unclear, incomplete, or poorly worded...
2. the question is mis-categorized - so the correct experts aren't viewing it...
3. the question requires an answer for something that cannot be explained online adequately...
4. specific training, tools, or equipment are required to avoid injury or death...
5. the Experts that are online simply don't have the resources to answer your question fully...

Please feel free to re-work your question if you feel one of these may be the reason.
Of course you are not required - but converting your question to a PAID one usually increases the reply rate as well.

Normal rates for FixYa are...
$ 9.99 answer for one question.
$12.99 Live Real-Time online chat or premium e-mail support.
$29.99 Live Real Time phone support
Sometimes FixYa will run specials for unlimited questions via monthly subscription or reduced rates for limited periods.


Consider the savings that can be had when an informed Expert can save you a $100 service call, or a $350 trip to the car dealership.
Your problem solved - guaranteed! Or your money back!!

If you don't want to pay - feel free to re-submit your question so it returns back to the top of the work queue if you still need help.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for helping with your FREE question

Posted on Aug 15, 2010

  • 2 Answers

SOURCE: jura impressa f7 decalcifying pressed rinse but

First you have to turn the machine off and then press and hold rinse buttom until you read empty tray and then follow the rest of the instructions. Good luck

Posted on Jan 19, 2011

  • 115 Answers

SOURCE: When I turn on the

Hi, Its got a blockage. Try removing and cleaning the brew unit, but I can tell you now, it needs to be looked at by a repairer. A normal blockage should leek in to the drain tray, but a leak on the bench means something is split or cracked. I do repairs. Dazza

Posted on Sep 23, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My jura X7 system is rinsing with milk. When pressing the rinse button, the machine is drawing milk to rinse instead of water??


The milk tubes should be submersed into water with a milk cleaning agent. sounds like you've left the milk tubes drawing from the fridge with milk in it.
Bean to cup cleaning

Aug 15, 2013 | Jura Capresso Impressa X7 Espresso Machine

1 Answer

Jura c9 on out of box start up won't leave rinse cycle and enter heating mode. Checked rotary dial but it seems fine.


You need to be patient and keep pressing the rinse button. I took a few water tanks of rinsing before it clicked over to heating mode. The manual and DVD need to mention this!

May 13, 2011 | Jura Capresso Capresso IMPRESSA C9 One...

2 Answers

Jura impressa f7 decalcifying pressed rinse but does not show empty button as the manual says


First you have to turn the machine off and then press and hold rinse buttom until you read empty tray and then follow the rest of the instructions. Good luck

Dec 31, 2010 | Jura Capresso Impressa F7 Espresso Machine

1 Answer

On Rinse nothing comes out?


Do you seem to end up with more water in the tray now then you did before this problem started? Does your coffee seem weaker then before? If so I have some ideas for you.
Mike

Apr 16, 2009 | Jura Capresso Impressa E75 Espresso &...

2 Answers

Jura Impresso E9 not dripping through spouts but into drip tray


This is most likely due to a bad o'ring. The bar you speak of...Does the unit have a small spout pointing upward from the area?...with a groove? Is the o'ring in that groove damaged or missing? When the grounds are compressed in the piston, the brew unit lowers down onto this spout and seals on it. The high pressure water then is injected upward inot the brew unit. When this seal fails the water simply leaks into the tray when there are grounds providing backpressure. When rinsing and no backpressure some of the water may be getting through. Make sure you lube up any seals with a food grade lube. Olive oil will work in a pinch.

Mike

Feb 05, 2009 | Jura Capresso Impressa E9 Espresso Machine...

Not finding what you are looking for?
Coffee Makers & Espresso Machines Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Coffee Makers & Espresso Machines Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Kolbrun...

Level 3 Expert

1205 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...