Question about Precor Exercise & Fitness

1 Answer

Percor treadmil error codes

Stuck button

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Precor Master
  • 914 Answers

Precor Error 05, Key Depressed at Power Up
Probable Cause 1. A key is permanently depressed on the display.
2. An interface chip (IC) has failed in the upper PCA's keypad.
3. Liquid (cleaning solution or sweat) may be on the surface of a touch sensitive display.

Corrective Action

  1. Disconnect the keypad cable from the upper PCA. Reset power to the machine. If the Error 05 is eliminated, the keypad is the cause and should be replaced.
  2. Disconnect the keypad cable from the upper PCA. Reset power to the machine. If the Error 05 still appears, the upper PCA* is the cause and should be replaced. *Upper PCA's most commonly do not come with software. Remove the software (chip) from the existing upper PCA prior to replacement and install into the new upper PCA.
  3. Wipe away all liquid from the touch sensitive display. Reset power to the unit. If the Error 05 is eliminated, the liquid was the cause.

Posted on May 01, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have A Life fitness 9100 treadmill The display shows the message "maintenance notes wax over" how can I remove this error?the treadmill will not turn on HELPPP


see this steps and fix it. .Of course you must read your instr. manual or download from www. iconservice.com
When the treadmill is not in use, press the "Stop," "ENTER" and "QUICK START" buttons in rapid succession. The "RESET" button can also be used, in place of the "Stop" button.

  • 2 Press the "ENTER" button three times to access the treadmill's error log.
  • 3 Press the up or down arrows to scroll through the error codes, if necessary for club or personal logging purposes.
  • 4 To view the treadmill's odometer reading when a particular error code was elicited, press "SELECT" while a particular error code is displayed.
  • 5 To clear the error log, press "QUICKSTART" for a minimum of four seconds while viewing the list. Prompts will appear on the display and let you know when the log has been deleted.
  • Oct 17, 2012 | Life Fitness Lifestride 9100 HRT...

    2 Answers

    I have a insight treadmill DK 616 with error code 7 . What does the e.c. mean and how do I fix it.


    hi i have a DK616 tredmill and i need i new drive motor can any one help

    Sep 10, 2012 | Exercise & Fitness

    1 Answer

    How to reset treadmill T630


    Dear Sir:

    I will try to help you.

      • 1

    When the treadmill is not in use, press the "Stop," "ENTER" and "QUICK START" buttons in rapid succession. The "RESET" button can also be used, in place of the "Stop" button.

      • 2

    Press the "ENTER" button three times to access the treadmill's error log.

      • 3

    Press the up or down arrows to scroll through the error codes, if necessary for club or personal logging purposes.

      • 4

    To view the treadmill's odometer reading when a particular error code was elicited, press "SELECT" while a particular error code is displayed.

      • 5
    To clear the error log, press "QUICKSTART" for a minimum of four seconds while viewing the list. Prompts will appear on the display and let you know when the log has been deleted

    If you need further assistance, please reach me, sincerely.

    God bless you.

    E.CUADRA
    MANAGUA, NICARAGUA. C.A.

    Oct 24, 2011 | Exercise & Fitness

    1 Answer

    Unlock the code on Precor treadmill?


    Dear Sir:

    Please try with this Reset system for Code:

      • 1

    When the treadmill is not in use, press the "Stop," "ENTER" and "QUICK START" buttons in rapid succession. The "RESET" button can also be used, in place of the "Stop" button.

      • 2

    Press the "ENTER" button three times to access the treadmill's error log.

      • 3

    Press the up or down arrows to scroll through the error codes, if necessary for club or personal logging purposes.

      • 4

    To view the treadmill's odometer reading when a particular error code was elicited, press "SELECT" while a particular error code is displayed.

      • 5

    To clear the error log, press "QUICKSTART" for a minimum of four seconds while viewing the list. Prompts will appear on the display and let you know when the log has been deleted.


    If you need further assistance, please reach me. sincerely. God bless you.


    E.CUADRA

    MANAGUA, NICARAGUA. C.A.

    Oct 23, 2011 | Exercise & Fitness

    1 Answer

    Z8 is showing L5 cant seam to fix this


    Dear Sir:


    I will try to help you, please use the steps with patience and carefully: You must need some basics tools; Included Dvom (Digital Voltemeter).
    Instructions Things You'll Need for to Reset Code:

    • treadmill (all models applicable)

    1.

      • 1

    When the treadmill is not in use, press the "Stop," "ENTER" and "QUICK START" buttons in rapid succession. The "RESET" button can also be used, in place of the "Stop" button.

      • 2

    Press the "ENTER" button three times to access the treadmill's error log.

      • 3

    Press the up or down arrows to scroll through the error codes, if necessary for club or personal logging purposes.

      • 4

    To view the treadmill

    Oct 19, 2011 | Spirit Fitness Z8 Treadmill

    2 Answers

    My tunturi T 20 gets error code E 7. it starts up, and after 5 or 10 seconds, it stops and flashed the error code. I have tried the recommended solution, which is to unplug the treadmill, wait a minute to...


    From time to time, error codes will pop up on your treadmill. It just takes a quick second to clear the error log and get the treadmill up and running again.
    1.When the treadmill is not in use, press the "Stop," "ENTER" and "QUICK START" buttons in rapid succession. The "RESET" button can also be used, in place of the "Stop" button.
    2.Press the "ENTER" button three times to access the treadmill's error log.
    3.Press the up or down arrows to scroll through the error codes, if necessary for club or personal logging purposes.
    4.To view the treadmill's odometer reading when a particular error code was elicited, press "SELECT" while a particular error code is displayed.
    5.To clear the error log, press "QUICKSTART" for a minimum of four seconds while viewing the list. Prompts will appear on the display and let you know when the log has been deleted.
    I hope you find it very helpful.

    Sep 04, 2011 | Exercise & Fitness

    1 Answer

    T3 Treadmill Stuck Key


    The cause of a “STUCK KEY” error message on the Basic or Advanced consoles. A stuck key error is displayed when one or more keys on the console or activity zone remain actuated for more than 45 seconds.
    SOLUTION
    Recycle the power. If the key remains stuck, the console will display “PLEASE WAIT” until the stuck key error is displayed again. Determine the stuck key. Replace the console if the problem is a key on the console. Replace the activity zone membrane keypad or the activity zone circuit board depending on the product if the problem is not in the console.

    Jul 28, 2009 | Life Fitness T3 Treadmill with Advanced...

    2 Answers

    Message in the display "err 2" and my kettler treadmill doesn't work


    Hi Rendra,

    Try this:
    Switch the treadmill off and then on again.
    Push the "minus" speed button and the "stop" button simultanuously.

    If all is well you will now have entered the maintenance mode.

    Next push the "plus" speed button and the "stop"button smultanuously.
    Now you you've reached the error mode.

    Push the "plus" or "minus" speed button to browse the error codes untill you've reached "L er".
    The push start to erase the message.

    Turn the power off and then on again to restart the treadmill.

    With any luck the error has disappeared and the treadmill will function again. If not.....you'll have to contact Kettler.

    Btw...This error occurs when the belt is "pushed" by the runner. For example when you put weight on the handlebar and the push your feet backwards.

    May 10, 2009 | Exercise & Fitness

    Not finding what you are looking for?
    Exercise & Fitness Logo

    Related Topics:

    231 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Precor Exercise & Fitness Experts

    Sportsmith LLC
    Sportsmith LLC

    Level 3 Expert

    914 Answers

    Electro Med Services...
    Electro Med Services...

    Level 3 Expert

    6694 Answers

    Shehu Pro
    Shehu Pro

    Level 3 Expert

    1284 Answers

    Are you a Precor Exercise and Fitnes Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...