Question about Lands Phones

1 Answer

I would like to know how to program the cordless phone to stop beeping while in use to indicate another incoming call.

It causes a disruption in the line of communication causing us to ask customer to repeat - repeat - repeat what they are saying. Any help would be greatly appreciated!!

Posted by Anonymous on

  • Anonymous Apr 17, 2015

    To better clarify... When I am on a line, speaking with a customer for example , and another line rings - the phone I'm on beeps to indicate there is an incoming call. Each beep interrupts the line and overrides the callers voice. The conversation may go like this... "hello" "hi, I would like to call in a refill for rx # 'beep''beep' and # 14 'beep''beep' 72. "I'm sorry there is another call coming and I didn't hear all the rx #'s could you repeat them." Rx # 'beep''beep' 43 and 142 'beep''beep'. (Our RX #'s are 7 digits) It's VERY frustrating. I want to stop the 'beeps

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Lands Phones Master
  • 3,512 Answers

Try #43# to turn off call waiting on phone line.
http://en.wikipedia.org/wiki/Call_waiting
If in doubt call up phone line company and ask for code to turn off call waiting feature.

Posted on Apr 18, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I forward calls and then unforward?


Call forwarding is not a feature of the cordless phone, it is done by the telephone company the CS6829 base is connected to. Contact the provider of your telephone service to see if it is available and
have them set you up. For example, with Verizon Cellular Home Phone Service, we have a CS6829 base connected to the Verizon
Service box: to forward incoming calls to another number we just
enter (dial) *72 and the number to be forwarded to and listen for
a 'beep beep beep' confirmation signal, then hangup. To stop the call forwarding we enter (dial) *73 and listen for the 'beep beep beep', then hangup. For your service, the steps may be different !!! Good luck.

Mar 30, 2016 | Vtech CS6829 2 Cordless Digital Answering...

1 Answer

How to turn off low battery beep in earpiece


Best practice to save battery power is to completely close programs after you are done using them and you can also use LEO Privacy to do that.
LEO Privacy Applock Hide Safe Android Apps on Google Play

Apr 28, 2014 | VTech Communications Vtech CS6429-4...

1 Answer

I have a code for my Uniden cordless to get voice mail while away from home. Not sure what else I need beside the code.


Remote Operation
You can check, play, or delete messages, even record a new greeting message from a
remote location (when you are away from home, or from another room using a
handset). Additionally, you can turn on or off your answering system remotely.
Remote access away from home
You can operate your answering system from a remote location using any touchtone
telephone.
1) Call your telephone number and wait for the system to answer. If the answering
system is off, it will answer after about 10 rings and sounds a series of beeps.
2) During the greeting message (or a series of beeps when the answering system is
off), press 0 and enter your PIN code within 2 seconds (see "Setting a PIN Code"
on page 25).
3) The answering system announces the current time and the number of messages
stored in memory. You hear "To play incoming messages, press zero-two. For
help, press one-zero." You will hear a beep.
4) Enter a command within 15 seconds, each command there after must be entered
within 2 seconds. You may select a command from the following chart:
* For the Repeat a Message function, press 0 then 1 within about four seconds to
repeat the previous message, or press 0 then 1 after about four seconds to repeat
the current message.
**For the Memo Record and Greeting Message Record functions, the first time you
enter the corresponding command, the phone starts recording. If you want to
stop the recording, press 0 then 7, 8 or 5.
5) After the command has finished, you hear intermittent beeps indicating that the
system is in the command waiting mode. You may enter another command at this
time from the chart above.


Command Function Command Function
0 then 1 Repeat a Message* 0 then 6 Answering System On
0 then 2 Playing incoming Messages 0 then 7 Memo Record/Stop**
0 then 3 Skipping a Message 0 then 8 Greeting Message Record/Stop**
0 then 4 Deleting a Message 0 then 9 Answer System Off
0 then 5 Stop Operation 1 then 0 Help

Jul 09, 2009 | Uniden Cordless Telephone

1 Answer

Dialing


Use the following steps:

1. Press the program button on the handset.
2. Use the up/down arrow keys until you see dial mode.
3. Press the select button and use the up/down arrow keys to change it to pulse.
4. Press the select button. You will hear the phone beep which indicates it has been changed.

Dec 26, 2008 | Vtech 5.8GHz Cordless Phone with Digital...

1 Answer

Input beeping - how to stop it?!


wow good question. and no change on settings. why? well this phones are fully contain system and are not a key or pbx system like the bigger office equipment. but over all it will work well and for the price I think you can bare with the beep.

Feb 29, 2008 | RCA 25202RE3 Corded Phone

2 Answers

Uniden 5.8Ghz phone.


You need to reset the main base unit. Unplug the power from the back of the base. While the power is disconnected, press and hold the delete key while reconnecting the power. Wait for a long beep tone. When the display shows 88 or P, press play button one time. If you have a phone without an answering machine, disconnect the power from the back of the base, press and hold find hs button while reconnecting power.

Jan 20, 2008 | Uniden Cordless Phone

1 Answer

Caller id


see if this corrects the problem. . .press and hold menu/voice mail button to enter the menu. . .press the zero/oper button to go to the message waiting programming option. . then press the edit/flash button to reset tne Message Waiting Indicator. . "DEL" will begin flashing..press the redial/save/ pause button to delete this indicator.. . a long beep will sound to confirm a reset/removal of notification..press menu button to exit. Theo

May 31, 2007 | Xact Communication XG2206 Cordless Phone

1 Answer

Caller ID indicator


Caller ID indicator is probably a new call notification. You should be able to review the incoming calls list even if you do not have caller ID to stop the light from flashing.

Nov 24, 2005 | Panasonic KX TC1881B Cordless Phone...

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

yadayada
yadayada

Level 3 Expert

76070 Answers

Are you a Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...