Question about Kenwood Programming Cable Tk2160,tk3160 Software Kpg82d

1 Answer

Can a pair of Kenwood TK 3160 work with Baofeng BF888s I have a Baofend and another coworker has the second Baofeng.Our shipping office bosses have Kenwood TK_3160 can they share channel 7

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Kenwood Master
  • 508 Answers

Here goes. Yes, your Baofeng Ham radios could be programmed onto a business band channel. Yes, it could transmit. BUT, ham radios do not meet the stringent requirements that Business Band radios do. This refers to channel spacing, interference and a long list that Business radios are required to have to make operation legal. Therefore, your Baofeng makes a great scanner. Business band frequencies are to be used by radios meeting these stringent requirements in order to prevent interference. Failure to follow the FCC Rules could result in a hefty fine. Didn't you wonder about the price difference?

Posted on Apr 16, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to program a Motorola rdm2070d to a baofeng bf888s


The RMD has a set frequency list. Those are factory programmed and cannot be changed. Your baofeng can be reprogrammed to most frequencies.
Critical! First, make certain both are in the same band: Uhf or Vhf.
Make the list of frequencies you need both radios to use. If the RDM has it in the list, you are good to go! If it does not, and you must match the Bao, get a new radio. There are no mods or hacks for an RDM.

Feb 25, 2017 | Motorola Radio Communications

1 Answer

Kenwood instruction manual


http://www.ebay.ca/itm/KENWOOD-TK-210-VHF-FM-SERVICE-MANUAL-NO-STINKING-PDF-CD-FREE-SHIP-EXC-/291176745060?pt=US_Manuals_Magazines&hash=item43cb7c8864

Jul 15, 2014 | Kenwood...

1 Answer

I have a kenwood tk 3160 that will not connect to a pc to program. I JUST litterally 5 minutes ago programmed another one with success and once i plugged the 2nd one in it wont connect. i get the...


Hi Greg,

It would seem that your radio PC port is faulty and may need replacement.

Not a job to do if you've not done it before.

Take it in to your nearest radio technician to have a check-up.

If it's an expensive radio, any thing over $250.00, then it's worth having it done, if it's a cheapie, which I doubt, even a used radio of this type, is worth spending money on if it's working.

That's my advice for you.

Cheers,
Peter

Oct 13, 2011 | Kenwood...

1 Answer

I have a Kenwood TK-2160 and I am unable to


the 2160 has a freq range of 144 - 158 only

Jun 12, 2009 | Kenwood...

1 Answer

Manual for Kenwood TK-248 Two Way Radio


I wasn't able to find a manual, but was able to find programming instructions online. I hope this helps!

http://blog.savel.org/2006/11/16/kenwood-tk-248/

May 08, 2009 | Kenwood W&W Mfg -TK2140-2160-3140-3160...

2 Answers

Need manual for kenwood tk-270 transceiver does any one no were i


Field Programming procedure for the Kenwood TK-270 or TK-370 handhelds. Press and hold (light) & (dial) while turning on radio. Hold until (SEL) appears on the display. Pressing (SCN) allows you to program the following 1. Monitor KeyOff = off1 = Monitor momentary2 = Monitor Lock3 = Squelch off momentary 2. Scan KeyOff = offCo = carrier operateTo = Time operate 3. Dial KeyOff = offOn = enable 4. TA keyTA = talkaroundRV = ReverseOff 5. Lo KeyOnOff 6. PriorityNone1 = fixed2 = selected 7. Fixed Priority ChannelTurn selector to channel 8. Look back time ATurn selector to time in seconds 9. Look back time BTurn selector to time in seconds 10. Revert Channel1 = Selected2 = Last Call3 = Last used4 = Selected + Talkback5 = Priority6 = Priority + Talkback 11. Tx Dwell timeTurn selector to time in seconds 12. Drop out delayTurn selector to time in seconds 13. Time out timerTurn selector to time in seconds 14. Tot Pre-alertTurn selector to time in seconds 15. Tot Rekey timeTurn selector to time in seconds 16. Tot reset timeTurn selector to time in seconds

Apr 27, 2009 | Kenwood Radio TK 260 360 270 370 2100 3100...

1 Answer

How to clone a kenwood TK 3160


Ok. I have looked through the service manual for both the 2160 and 3160 and can not find anything that indicates that you can clone with just a cloning cable and not use software. However the 2170 and 3170 say to turn the power on While pressing the B button which yours doesn't have. Try turing on the radio while pressing any one of the side buttons.
Hope this helps.
P.S. The software is reasonably easy to get and IS much easier to use.. dan

Dec 09, 2008 | Kenwood...

Not finding what you are looking for?
Kenwood Programming Cable Tk2160,tk3160 Software Kpg82d Logo

254 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1646 Answers

Jason

Level 2 Expert

211 Answers

Jaime Hernandez

Level 3 Expert

2315 Answers

Are you a Kenwood Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...