Where do we acquire a new cover? - Ice Cream Makers

You might try to google the brand and model of the machine plus "owner's manual". Or go to the Brand site and look for support for the model.There might be a link. Or, go back to the seller and ask for a manual. If this was acquired on sale, chances are the manual was known to be gone.

Unfortunately Rival doesn't make replacement parts available for their appliances. You can contact them directly at Sites rival products Site However I haven't ever been able to get replacement parts through them.

I have found the 90% of canister style Ice Cream makers have the same size lids. In the past I have purchase West Bends Ice Cream maker lid and it fits perfectly on both my Rival ice cream maker as well as my Back to Basics model.

Here is a link to the parts on West Bends site:
IC10885 Ice Cream Maker

The lids is part number U66-2, and is only a couple of dollars from West Bend.

-Colleen @ Mending Shed

Contact the manufacturer they should help or put you on to someone that can.

Viscosity adjustments should not have to be made frequently on these machines. If you change products a lot, such as flavors of yogurt, minor adjustments may be required. If your machine uses 3 phase electricity and it machine has been moved or any electrical work performed you may want to check the beater rotation, the beater should rotate clockwise inside the barrel viewing from the front, if you look at the gear box from the back, the pulley should be turning clockwise as well. Otherwise, there is a fine tuning potentiometer on the control, you must remove the front cover to see it. Clockwise is colder/thicker. I recommend small adjustments. It is best to read the amp draw on the motor to see what type of amps it is drawing. If your mix is soft and your motor is drawing 4 amps, you may have another type of problem such as a bad motor. The board and control can also fail giving these problems. There are many things to check in addition to these. Hope this will help you get started.

Hi Barry
you will have to contact cuisinart or local service agent for one in your country.
Unless you are lucky and find one on ebay.

---

Please dont forget to vote this answer was helpful

Many thanks

------

They're sometimes available here: http://stores.ebay.com/Lauras-Last-Ditch/_i.html?_nkw=rival+ice+cream&submit=Search&_sid=93311479

They're sometimes available here: http://stores.ebay.com/Lauras-Last-Ditch/_i.html?_nkw=rival+ice+cream&submit=Search&_sid=93311479

did you ever manage to source parts for this?

only place i even found it listed as a product was on the www.delonghi.com.au no idea where to get parts though as i need a new dasher motor cover + pulley (mine seems to of overheated and distorted beyond working point) i have emailed 7 different spares compaies so far in the uk but no luck as yet, i dont want to ask the AUS branch for the spares due to the postage but looks like it might be the only option.

anyhow hope you did manage to find one and if so perhaps you could post a reply to let us know

Where can I get parts/disks for a Simac 700 pasta machine?

Dear customer

please undergo the below

hello sir/madam i had got a link which may can solve ur problem and the link is given below.
http://kitchen.manualsonline.com/search.html?q=+viking+ice+maker+1+html?s=gg314159&gclid=CImBvp-Mx5cCFckrpAodfySWSw

Please if u are satisfied rate this otherwise just give it as fixya,Thank u