Question about Televison & Video
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: TV & Tuner stays in Standby mode
Assuming you have tried changing batteries in your remote and any front panel power switch your set has, the main power supply is probably at
fault and without some technical background and a couple of test instruments,
you will not be able to do the repair yourself.
What you can do though is; unplug the set, let it
stand overnight or at least several hours, remove the back panel and look for a
separate board with mostly larger components on it; it will have a ferrite core
transformer on it and several larger capacitors which are cylindrical and
mounted vertically to the board.
Before touching anything inside, especially on that board, allow several hours to be safe since the larger capacitors can hold a painful voltage charge for some hours.
If you see signs of overheating such as discoloration of the board material, it may not be repairable but if you can find a part number on the board, you might be able to buy the power supply and install it yourself.
If there are no signs of heat damage to the board, there may be companies offering to repair it as a subassembly instead of repairing the whole set which could be much more expensive.
If you choose to replace or have it done, the power supply still may not be at fault since most are capable of switching on and off if a downstream problem is causing an overload.
Posted on Oct 29, 2008
SOURCE: 42 inch Vizio will not stay on
There are 4 scenarios.The most afford part out of these scenarios starting at $215 to $850.
A. use a repair tech.
B. Buy a new TV cause there are knock out deal right now at circuit city(chapter 11)!
Posted on Nov 11, 2008
SOURCE: Plasma TV
Hi and welcome to FixYa,
To get a good signal on all TV units, the source must be good and strong. The source could be an aerial antenna or connection to your local cable provider. The message "No Signal" indicates that the TV cold not receive a decent TV signal. With this in mind, possible solution wouold then be to increase/improve the incoming TV signal:
Posted on Nov 23, 2008
Tips for a great answer:
Feb 21, 2016 | Televison & Video
Jan 03, 2015 | Samsung Televison & Video
Apr 21, 2012 | Samsung SyncMaster 2493HM Monitor
May 30, 2010 | Fujitsu Siemens AMILO D-7830 Notebook
Mar 03, 2010 | Sony Playstation 3 (PS3) Console
Sep 25, 2008 | Vizio P2 42 in. HD-Ready Plasma Television
Aug 17, 2008 | Sony Grand WEGA KF60WE610 60" Rear...
39 people viewed this question
Usually answered in minutes!