Question about John Deere Garden

2 Answers

Do I need to switch to the high lift blades for my rear bagger to work right?

John Deere x300

Posted by on

  • Be Keen
    Be Keen Apr 14, 2015

    Thank you Kprime. I'm going to contact my dealer.

  • Kprime
    Kprime Apr 14, 2015

    I get my high lifts herehttp://www.amazon.com/gp/product/B00CAXM...

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • John Deere Expert
  • 187 Answers

Yes. I use gator mulching blades during the summer. They won't bag a thing. The original/standard blades will bag some grass/leaves, if they are dry and not too dense, but they are prone to clogging. The high lifts work much much better.

I get mine on amazon. The shipping is free. LA145 48" deck. Part GX21785.
http://www.amazon.com/gp/product/B00CAXMAG2/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1#product-description-iframe

Posted on Apr 14, 2015

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • John Deere Master
  • 1,169 Answers

High lift will provide more air flow to the bagger.

Posted on Apr 13, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I need a drive belt routing picture for a John Deere x300 mower


For a routing or installation diagram, contact John Deere directly.

Sep 11, 2017 | John Deere Garden

1 Answer

Cutting grass but it isn't going into the bagger?


grass catchers need special shaped or good blades to throw the cut grass into the bag
check/ replace the blades

May 06, 2016 | John Deere D130 22HP V-Twin Foot Pedal...

1 Answer

Attach bagger


ive got a JD 180 .with a bagger on it if you have the factory bagger
1st bolt bracket to back right hand side of tractor holes should allready be there next assemble bagger top to tractor bracket , hang collection bags (two) from top of bracket (open top to access) then assemble diverter tube all together three sections , snap end (wide) into bagger (no bolts needed) then fold back safety discharge cover on deck all the way snap the inlet adaptor into hole left by this (perfect fit) and last stretch rubber bungee up to deck wheel strut and place clip thru small moon clip there, now you willl need to replace your deck blades with the High Lift type (mulch) avail still from JD (theres a extra wing on back of it) this makes more air to scoot grass up the chute if not your gonna have a lot of cloggs

Oct 30, 2014 | John Deere Original 130 160 165 175 180...

1 Answer

L110 bagger installation


I can't help you on the bagger hole location. But you will need quality hi-lift blades. "Gator-Blades" are some of the best. At www.mowpart.com or Amazon.com

May 16, 2014 | John Deere 6.5-Bushel Bagger for Twin...

1 Answer

Using a cyclone rake with a john deere x300 with a mulching kit


bagging blades would work better together with any bagging system

Jul 14, 2012 | Ultimate Sound Cyclone Rake Commercial Pro...

3 Answers

I have a John Deere X300 garden tractor. When going into reverse the deck blades stop cutting unless you pull up on the switch. We have no little kids so safety is not an issue. How do you get around this?...


I have a John Deere X300 lawn tractor with an intermittent starting problem. From time to time, when you turn the key all you get is a click. Battery is connected, headlights work, but starter will not turn. Keep turning key off and on and eventually it starts. Other times, it starts just fine. What parts should I start replacing?

Nov 30, 2009 | Garden

1 Answer

I need a john deere X360 44" front blade


you can buy it on ebay right now!
here's the link: http://cgi.ebay.com/John-Deere-44-Blade-X300-X304-X320-X324-X340-Ops-Manual_W0QQitemZ120402528023QQcmdZViewItemQQimsxZ20090406?IMSfp=TL090406151008r17840

May 10, 2009 | Garden

Not finding what you are looking for?
Garden Logo

Related Topics:

243 people viewed this question

Ask a Question

Usually answered in minutes!

Top John Deere Garden Experts

Phil Walker
Phil Walker

Level 3 Expert

608 Answers

Tim Whalen

Level 3 Expert

3074 Answers

Wayne Fellows
Wayne Fellows

Level 2 Expert

262 Answers

Are you a John Deere Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...