Question about Pioneer Televison & Video

1 Answer

My 60 inch Pioneer elite plasma TV light blinks blue light blinks eight times, what can I do?

My 60 inch Pioneer elite plasma TV light blinks blue light blinks eight times what's the code pioneer is closed

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Pioneer Master
  • 74,666 Answers

These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. Surf the site with patience.

Posted on Apr 12, 2015

  • Anonymous Apr 12, 2015

    Thank you for the help trying to figure this darn thing out there's no rhyme or reason why it works sometimes it does sometimes it doesn't

  • The Knight
    The Knight Apr 12, 2015

    Fault in the main power supply regulator board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician.

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 84 Answers

SOURCE: Pioneer Elite Plasma TV

This a factory issue and usually requires service. Most cases it is a bad power supply caused by a surge or powering off and on too fast ... sorry I wish I had better news

Posted on Sep 20, 2008

electronick
  • 505 Answers

SOURCE: pioneer elite 50 plazma tv

this is a power supply.. you have to replace the board to fix. price depends on model but on the old ones its $$

Posted on Jan 09, 2009

electronick
  • 505 Answers

SOURCE: my 60''pioneer plasma blinks 12 times after i turn it on

looks like 12 blue blinks is a communication with the Digital tuner error. pioneer had a software upgrade/fix for this in some cases, others might need a new digital tuner pcb. I would unplug all power, wait 5 min, plug in (wait1 min) and try it again. If it is software, it should hopefully work. Make sure you pull your cable card if you have one. If it still won't turn on, you probably need the digital tuner board = $200-500 repair. Pioneer is usually very helpful, I'm really surprised they didn't help at all.. They'll want model #, serial # and date of purchase.

Posted on Feb 03, 2009

  • 8457 Answers

SOURCE: Pioneer Elite. Loud popping sound and picture disappeared

Power supply board is dead.The board where the power a/c cord plug into it.Replace the power supply board.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.

Posted on May 31, 2010

  • 1 Answer

SOURCE: I open the top cover of my Pioneer Media Receiver

Any luck with this? I really need this information as well.

Posted on Nov 22, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

05 Pioneer Elite 50 inch plasma. Blue and Red lights blink and no screen. Model Pro-506PU. Can someone help


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. ...
http://electro-medical.blogspot.com/
If blinks continue without any pause, the main board is faulty.

Apr 19, 2016 | Pioneer Televison & Video

1 Answer

Find activation code for pioneer


My pioneer 5020FD Kuro tv. when I plug power to the unit, a blue light blinks 8 times pause 2 sec. and blink 8 times repeating this and if i press power button it clicks red light and makes a clicking sound and goes back to the blue light blinking again, it did this once before and the picture came on fine until i turned it off and now it just blink the blue code.

Dec 10, 2014 | Pioneer PDP-5020FD 50 in. Plasma HDTV

1 Answer

Red light blinking


How many times do this standby light blinks at one time switch ON? These blinks are fault indications. From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit stage inside it. These are called blinking codes. If you wish to get more about these blinking codes, check this link. It has details about these blinks and causes to many brand televisions. To follow and to do repair work to TVs, especially to Plasma displays, you must have sound knowledge in electronics. Anyway, check it. http://electronicshelponline.blogspot.com/ Pull up older posts there, either by its left side bar, or see it in Timslide option. It will make search easy.

Jun 25, 2013 | Pioneer Elite PRO-151FD 60 in. Plasma TV

1 Answer

Pioneer Elite 1140 HD not working : reds light blinks 4 times


Four blinks of standby light to Plasma TVs, denotes a voltage output failure from its main power regulator board. Check this link for more. http://electronicshelponline.blogspot.com/ Pull up older posts there. Blinking codes to most Plasma TV brands will be similar. Check them. Pioneer brand is also there.
Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any attempt to service or repair the product by anyone else could result in serious injury or death. If you are not familiar with electronics, do not attempt to repair. Whether you suffer fatal electrical shock. Instead, contact the nearest service centre.

Jun 03, 2013 | Pioneer Elite PRO-1140HD 50 in. Plasma...

1 Answer

My 50 inch plasma pioneer elite has a green color. I dont know how my son changed the color scheme on the tv but i cannot turn it back.


Check in your menu under video and see if there are 3 gamma settings for the Red, Blue and Green. Some plasma's have that feature, why, I don't know, they only cause issues with the consumer. They are listed in the service mode but if I were you I wouldn't go there and besides it's a million to one that your son happened to hit that lottery.

Jul 14, 2009 | Pioneer Elite PRO-1540HD 60 in. Plasma...

1 Answer

I have an Elite faltscreen television that has been working well for over one year. For an unknown reason, the blue light (next to the on/off switch0 is blinking and the TV is not responding or turing...


Please count the number of flashes of the Blue LED. It will flash Ex. 12 times and pause for 2 seconds and then flash 12 times again. The number of times it flashes will tell me more as to what the solution is. I am assuming the set works otherwise ?? What is the model number of the set ?
Scott

Feb 14, 2009 | Pioneer Elite PRO-1540HD 60 in. Plasma...

1 Answer

My 60''pioneer plasma blinks 12 times after i turn it on


looks like 12 blue blinks is a communication with the Digital tuner error. pioneer had a software upgrade/fix for this in some cases, others might need a new digital tuner pcb. I would unplug all power, wait 5 min, plug in (wait1 min) and try it again. If it is software, it should hopefully work. Make sure you pull your cable card if you have one. If it still won't turn on, you probably need the digital tuner board = $200-500 repair. Pioneer is usually very helpful, I'm really surprised they didn't help at all.. They'll want model #, serial # and date of purchase.

Jan 31, 2009 | Pioneer PDP-6070HD 60 in. Plasma...

1 Answer

TV keeps shutting off automatically


Since your plasma is less then a year old, I would suggest to contact the manufacturers to get it fix under warranty. If the plasma keeps shutting off by itself, that is not normal and should be repair.

Jan 28, 2009 | Pioneer Elite PRO-111FD 50 in. Plasma TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

542 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74666 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jaime Hernandez

Level 3 Expert

2326 Answers

Are you a Pioneer Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...