Question about Washing Machines
Posted by Anonymous on
CHECK THE CAM DOGS INSIDE THE AGITATOR, AS THEY WILL HINDER THE AGITATION PROCESS.
Posted on Apr 16, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If this a whirlpool brand washer, there are sone parts bad in the agitator it's self. These parts are called dogs and they make the agitator rachet so that the top half only goes one direction. Does this sound like what you are experiencing? If so, let me know and I can assist you further.
Posted on May 13, 2009
Sounds like your agitator is not assembled correctly. It should not have things getting stuck constantly and it should definitely NOT be so easy to remove. Feel around the bottom edge of your agitator. If there is more than a 1/8 - 1/4 inch gap (roughly), it's not being snapped all the way down. Take a towel and fold it to where it is nice and fluffy. Lay it over the top of the cone part of your agitator. Get a hammer and hammer over the towel (as not to damage the agitator top). A rubber mallet could also be used. Tap firmly until you hear a click or until the gap between the agitator and wash tub reach 1/4 -1/8 of an inch. This should solve the problem.
Hope this info was helpful to you. Good Luck!
Posted on Jan 29, 2010
If the clothes are being pulled under the rotating plate, you need to replace the plate because the plastic-sealing-edge strip is not pressing tightly against the inside of the washtub. I did this and all has been good for a year. The grease COULD be from the rotating parts under the plate, but there is also a post on this Fixya site that has to do with replacing a transmission seal. I have not had the dirty-streaks problem, so I cannont comment on a fix for that. BUT, replacing the rotating plate WILL fix the issue with pulling clothes under it.
Posted on Aug 12, 2010
Tips for a great answer:
Mar 26, 2015 | Washing Machines
Dec 09, 2014 | Washing Machines
Sep 17, 2014 | Maytag Washing Machines
Jun 29, 2014 | Frigidaire ATF6000ES Front Load Washer
Sep 07, 2010 | Washing Machines
Aug 16, 2010 | Whirlpool LSQ8543J
Oct 09, 2008 | Hoover Washing Machines
87 people viewed this question
Usually answered in minutes!