Question about Washing Machines

1 Answer

During wash cycle, the front loader made a loud bang during spin cycle and now motor isn't driving the drum

The machine jumped forward a few inches also. I have had top cover off to check belt is not snapped but all is OK. I started machine to cycle and completes the whole cycle with no errors but the motor pulley is not turning, but can hear the motor turning, but the motor pulley is not. The drum and motor turns freely when turned by hand Anyone got any idea on my issue? Thanks John

Posted by on

  •  johnny rebel
    johnny rebel Apr 11, 2015

    the transmission is broke

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Washing Mach... Master
  • 10,875 Answers

The belt broke

Posted on Apr 11, 2015

Testimonial: "The belt is not broken. i stated this in my question"

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore 970-C42062-00 washer drum squeaky and bangs


The bearing may be shot. A common problem with front loaders. At 10 years of age, the machine has replacement in its future.

Apr 27, 2017 | Kenmore Front Load Washer

1 Answer

Amana top loader washing maching permanently tilted drum & loud banging during spin cycle


I guess you washed some curtains and blankets in it that it spun unbalanced. There are 2 things. One is the one of the suspension springs broke off. Another is the center post is already bent. You may have to check inside. If you are handy, you can take off the cover and check. Suspension springs are dangerous when being replaced. You may have to wear a pair of goggles. With the centerpost, it is difficult to replace. I suggest you call a technician for this.

Jan 17, 2014 | Washing Machines

1 Answer

Kenmore 43142 front loader bangs during spin cycle any ideas on what the problem might be?


always check the load to the drum is not to heavy on one side, this could cause it to bang.

Aug 25, 2012 | Kenmore Washing Machines

2 Answers

Loud clanking noise during spin cycle. Will not


If it is a front loader, then remove the rear panel, remove the belt, and soin drum by hand, if it feels rough, or is noisy and rumbling, then the main drum bearings have failed.
This is a major repair.

Feb 01, 2010 | Whirlpool LHW0050PQ Front Load Washer

1 Answer

Very loud shaking during spin cycle


assuming it is a front loader. Check if transport bolts are not still attatched. If not, open back cover and look for shocks for breakage or being siszed. Do you have a noise from the drum while spinning and having no load. If so, the bearings need to be replaced.

Sep 16, 2009 | Maytag MAH8700A Front Load Washer

1 Answer

Three day old Indesit washing machine


Is it a maytag? My maytag front load washing machine had 2 long bolts with plastic braces on them, to keep the drum still during shipping. Mine would bang and shake all over. I got the book out before I finally figured it out. I had to take the back cover off and remove the bolts and plastic braces over them. They look like they' 8 inches long or so. It works great now.

Carolynn

Jul 15, 2008 | Indesit W 123 Front Load Washer

1 Answer

Thumping and banging


make sure all shipping pins are out the tub should move all around from side to side if it level still bangs its eather the balance ring top basket are there 3 slides on a plate above the motor just put some silacone oil on tham move around

Feb 09, 2008 | Kenmore 24032\24036 Top Load Washer

1 Answer

Loud Noise during spin cycle


drum bearings are gone,it would cost too much to repair,the drum shaft would to be repalced as well.Sorry

Dec 15, 2007 | Whirlpool Duet GHW9150P Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

Brad Brown

Level 3 Expert

15441 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...