How do u enter code an set it up for samsung tv

1. Press the TV button to set the remote to TV mode.
2. Press the POWER button to turn on the TV.
3. While holding down the POWER button, enter the code corresponding to your brand of TV. •If there is more than one code listed for your TV in the table, enter one at a time to determine which code works. Example : For a Samsung TV While holding down the POWER button, use the number buttons to enter 00, 15, 16, 17 or 40.
4. If the TV turns off, the setting is complete.
•You can use the TV POWER, VOLUME, CHANNEL, and Numeric buttons (0~9)


Go to page 14 of the user manual
https://fccid.io/A3LHTZ320/User-Manual/Users-Manual-1-1061180

On TV remote press Mode button or TV button. Then select HDMI 1 or HDMI 2 depending on where the cable is inserted in the TV. Now press the SET button & enter the code. Try the following codes:
0019 0618 0644 0056 0060 0587 0037 0178 0030 0556 0009 0702
0774 0093 0217 0448 0747 0482 0370 0264 0329 0090 0032 0216
0290 0154 0150 0092 0072 0179 0208 0519 0156 0163 0625 0226
0812 0817 0821 1060..
If the above codes don't work contact TV manufacturer for the code.

Press the MODE button to make the TV
indicator on the remote control flash.
2 Press POWER button to turn on the TV.
3 Point the remote control toward the TV.
4 While holding down POWER, enter the code
corresponding to your brand of TV.
• If the code matches the TV's code, the TV will be turned off.
• If there is more than one code listed for your TV in the table,
enter one at a time to determine which code works.
Example: For a Samsung TV
While holding down POWER, use the number buttons to enter 00,
01, 02, 03, 04, and 05.
• You can use the POWER, TV/VIDEO, VOLUME, CHANNEL, and
Numeric buttons (0~9).
5 Pont the remote control toward the TV and press
POWER. If the TV turns off or on, the setting is
complete.

If you wish to buy a genuine remote control, you have to contact the authorized service center. If you wish to buy a universal remote control, you should know about, which brand remote control have set-up codes to your TV brand, and buy that one according to availability. The first thing you have to do is, to confirm the number of digits in the setup codes to your TV brand. There are 4 digit, 5 digit, 3 digit and even 2 digit codes. You can make it sure by entering '0s' at the code enter window the TV dispays, and asks codes. Enter 'Zeros', and count how many zeros can be enterd. That number will be the number of digit of setup code, the TV/Device need. If you can enter 5 zeros, the number of digit in the set-up code to your TV is a '5' digit one, if only 2 zeros can be enterd, the number of digits in the set-up code to your TV should be a 2 digit one, and so on.. If you wish to get more details about this, try the sites linked here. If you wish to get more codes and other details check:
http://electrohelponline.blogspot.com/
http://electro-medical.blogspot.com/
Both the sites have setup code list, and setup procedure to many popular brand remote controls. Check the site in 'Mosaic' view. It will make search easy.

To set up the volume control on your Telewest remote control, to be able to change the TV volume, please follow the instructions below.
1. Using the table below find your make of TV and the code which matches it.
2. Press and hold down Volume + and mute on your remote control at the same time for at least three seconds, until the green light in the top right-hand corner of your remote control flashes twice.
3. Release the buttons and enter the first four digit code from the table below. (You must do this within ten seconds).
4. As you enter the first three digits the green light on your remote control will give a short blink.
5. As you enter the fourth digit, the green light will flash twice to confirm that the volume is set.
If setting the volume is not successful, please repeat the above steps with the second or third codes from the table below.
Samsung 0065, 0584, 0037

Try holding the TV key while pointing it at your TV set, then enter code 23 and let go of the TV key. If it does not work try code 24. Both are for Toshiba.

Hi! try these steps.. I hope it helps..

1. Turn on the TV.
2. On the remote control, press and hold SET
until the LED blinks twice, then release SET.
NOTE: The remote control will exit programming if
more than 10 seconds elapse between key presses.
3. Enter the first four-digit code for your TV. If
you perform this procedure correctly, the LED
will blink twice.
NOTE: If the LED emits a long blink, the code is
invalid. Repeat steps 2 through 3 and try entering the
same code again.
4. Aim the remote control at your TV and press
POWER once.The TV should turn off. If it does
not respond, repeat steps 2-3, trying each code
for your brand until you find one that works.

The code for samsung tv are:

Samsung 0060, 0030, 0178, 0019, 0056

Samsung Codes-004-005-006-012-013-015-017-019-082-104-105-106-171-172-196-201-204. Try these when set shuts off/on after you enter 3 digit code that is your code number.

Push the Set button and enter the following codes and enter one of theese codes: 018, 020, 193. If one doesn't work try the next one. You have to push set each time you enter a new code.

i cant find my quazar set up code 4 head vhq40hm?to put in to my one for all universal remote