Pairing code for Sanyo 32 in.2010 for you tube. Hdmi attached but" you tube" app. For pairing doesn't appear what is the code 9 digit s

Hi Thomas

I'm not familiar with your TV Brand.... but

By Pairing code... are you referring to the Bluetooth pairing of 2 devices.

Reset the Bluetooth device and place it in "discovery mode" to re establish a connection.

Pairing codes are usually provided on the screen when the "Discovery" of a device is made.

Search for discovery mode wikihow

Typically, the pairing code is supplied in the settings menu of the ap on the TV.

You would open the YouTube app on the TV, then use the settings menu and select the "Pairing" option.

At this point, you would be supplied with the necessary codes for the various mobile devices it supports.

Hope that helps.

Normally, the 'factory default' paring code for a new bluetooth device is - 0000. Try this first.

If 0000 doesn't work, then try resetting the cd player back to factory settings (contact the manufacturer for further assistance).

Try 6789

HOW TOCONNECT BLUETOOTH






Hi,

It all depends. When you want to connect a blue tooth to a phone, You will need to switch on the blue tooth device and the phones blue tooth you are pairing with.

When pairing both device, you will ask for pairing code, You four digit numbers(default code(0000). and pair.

After pairing both device, you detected paired, you can now use the blue tooth device with your phone.

there are no special code for pairing Blue tooth device.
Normal codes used are any four digit, four numbers you want to use.(0000, 1234).


Take care.

Hi,

It all depends. When you want to connect a blue tooth to a phone, You will need to switch on the blue tooth device and the phones blue tooth you are pairing with.

When pairing both device, you will ask for pairing code, You four digit numbers(default code(0000). and pair.

After pairing both device, you detected paired, you can now use the blue tooth device with your phone.

there are no special code for pairing Blue tooth device.
Normal codes used are any four digit, four numbers you want to use.(0000, 1234).


Take care.

In general, each bluetooth device you want to pair with your phone must be put in pairing mode (consult the device's user guide on how to do it). Then, you must make your phone's bluetooth application search for new devices. After a while, the device should appear in the phone's screen. It should be selected, and be commanded to proceed. In case a PIN (or passkey, or pairing code) is requested, enter 0000 (four zeros - it's the default PIN adopted by the vast majority of bluetooth devices' manufactures, but here again, consult the device's user guide, to be sure). In normal conditions, this pairing process should be performed just once. All subsequent connections between already paired devices should be made automatically, provided that both their bluetooth stacks are turned on.
Hope you are able to sort your problems out.
Cheers! Carlos

Try 0000. That was the factory pre-set number for mine.

After your phone has found the H700 you have to tell your phone to pair with it. It will then ask for the code. Punch in 0000 and confirm. After a little bit the H700 will flash blue several times rapidly and then start blinking about every 5 or 6 seconds. It is then paired with your phone.