Question about Vulcan Kitchen Appliances - Others

Open Question

How do I unlock the program on my Vulcan electric fryer?

Can't set temperatue because the program is locked. Have tried evry button combination but it won't unlock

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 395 Answers

SOURCE: Locked

press and hold the power button for 5 to 10 seconds

Posted on Jan 17, 2008

  • 1 Answer

SOURCE: Ive got unlock cod from 3g uk but evry time I try its says not allowed

ring or go to your local 3 store and tell them your problem same thing happend to me they fix the problem 50% of the time

Posted on May 25, 2009

  • 269 Answers

SOURCE: My Akai tvcd combination set is locked how do I unlock it.

try to press the display button on the remote for 5 secs. until the lock disappear then turn it off and unplug it.

Posted on Aug 04, 2009

  • 612 Answers

SOURCE: cannot find parts list for a vulcan electric

Is it a Vulcan Hart 3IFD50? if so look up Heritage Food Service Equipment web sight at They will have any part you will need

Posted on Oct 13, 2009

  • 1851 Answers

SOURCE: electric door locks - button will lock all doors

You may have a loose connection and the only way to check it is to remove the door panel and look - unplug and replug the door in and it will most likely be good for 100 years.

Posted on Apr 07, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is the reset button on vulcan fryer?

Most Vulcan fryers do not have a reset button. The high limit is self resetting when the fryer cools down to a safe temperature.

May 31, 2014 | Vulcan Fryer LG500-NAT

1 Answer

My vulcan lg 300 deep fryer latch won't turn what should I do

Some fryer valves have a safety lock, usually a slide on the handle near the valve body that must be released to open the valve. Check for this first. It's very rare for a fryer valve to stick unless it was forced shut with something partially blocking it. If not, let the fryer cool completely. Dip as much oil out as possible. Then disconnect the gas line and, with help, turn the fryer upside down draining the remaining oil into a suitable container. At this point, you have little to lose. Take a large wrench or piece of pipe to get more leverage and try to force it open and free it up. Do not use so much force that you damage the kettle. If you get it free, check to see that it does not leak before putting oil back in the fryer. If it leaks or fails to come free, replace the valve.

May 23, 2014 | Vulcan Kitchen Appliances - Others

1 Answer

I am not sure what what model number I have, but when I try to light this older Vulcan deep fryer it doesn't light at all nor do I smell any propane. It's as if it's not getting any gas.

This is our number one issue with gas fryers... Not being able to get the unit lite.... Normally our service techs tell our customers they are not holding down the pilot light button long enough. The sensors in there take some time to get hot enough to send a signal to the pilot telling it to light... If you need someone to walk you through it, call Ray at 888-542-5959, at Restaurant Equipment Outlet.

Aug 31, 2011 | Vulcan EF3 Deep Fryer

1 Answer

All the lights are on but does not heat up

I'm assuming this is an electric fryer...Sounds like your thermostat may be bad...The lights and the therostat would be two different things... You could call Vulcan directly and ask for warranty/parts and ask for help or call us at 888-542-5959... Thanks, Susan @ Restaurant Equipment Outlet, Cincinnati, Ohio

Aug 20, 2011 | Vulcan ERD50 Deep Fryer

1 Answer

Need to know where to light pilot

Normally, it's under the fryer, inside the door...The issue almost always is you have to press the button down long enough for the sensor to tell the fryer to light....There are 3 or 4 burners in the bottom of the frypot on top and under the fryer is the pilot to light these all up...Look for the gas valve, turn the gas valve to pilot, and press and hold it down, put flame to pilot and release button when flame is self standing... Then turn to on position. If you have other issues, call the Vulcan company themselves, and they will help you further.... Susan Restaurant Equipment Outlet, Cinc, Oh

Aug 20, 2011 | Vulcan EF3 Deep Fryer

1 Answer

Cannot find parts list for a vulcan electric fryer. model no. 3erd50.

Is it a Vulcan Hart 3IFD50? if so look up Heritage Food Service Equipment web sight at They will have any part you will need

Oct 13, 2009 | Vulcan Kitchen Appliances - Others

1 Answer

My Akai tvcd combination set is locked how do I unlock it.

try to press the display button on the remote for 5 secs. until the lock disappear then turn it off and unplug it.

Jul 30, 2009 | Televison & Video

1 Answer

Electric to lp

You can try their website:

Jun 22, 2007 | Vulcan GR35 Deep Fryer

Not finding what you are looking for?
Kitchen Appliances - Others Logo

Related Topics:

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vulcan Kitchen Appliances - Others Experts

Angel Joseph Jr.
Angel Joseph Jr.

Level 2 Expert

683 Answers


Level 2 Expert

127 Answers


Level 3 Expert

76691 Answers

Are you a Vulcan Kitchen Appliances - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides