Question about Hotpoint Washing Machines
Connection details for control board
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: hotpoint aquarius wf340
First remove the filter (if you can do this easily) - place a roasting pan under it to catch the water.
If you cannot get to any filter, remove the rear pipe from the waste pipe, and check it is not obstructed.
If it looks good enough, try a hot wash with 1 cup of soda crystals. This should clear any accumulation of grease in the pipes.
If still no good, you may have to open up the machine to clear any internal filter before the pump, and check pump vanes are still intact.
Posted on Nov 05, 2008
if you dont have one in the front under the lid your model comes with a slip on filter that goes on top of the aggitator you schouldnt run it without it because ge pumps have a tendacy to freeze up with the lint from your clothes especcially levis hope this helps
Posted on Dec 18, 2008
Tips for a great answer:
Feb 26, 2015 | Hotpoint Washing Machines
May 23, 2011 | Hotpoint Washing Machines
Feb 20, 2011 | Hotpoint Washing Machines
Sep 07, 2009 | Washing Machines
Mar 16, 2009 | Hotpoint Aquarius WMA42 Front Load Washer
Nov 05, 2008 | Kenmore 13202 Top Load Washer
44 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: