Question about Sony Grand WEGA KDF-60WF655 60" Rear Projection HDTV

Open Question

Will not tune in chanels.

Auto program doesn't find any. Direct input won't work either. The antana works good with other t.v.'s. If I hook up a VCR or converter box on chanel 3 or 4 it won't work, but if it's hooked up with RCA jacks it works fine. I'm thinking it's the tuner on Bord A or the RF antana switch.

Posted by on

  • bobdt223
    bobdt223 Jun 02, 2015

    I changed the complete A bord out of a working one with a cracked screen along with the RF along with the RF antenna switch (pictured) and it still won't tune in any channels. Not even if I hook up a VCR on channel 3, nothing. What could be the issue? I have a KDF55WF655, could I change out the whole chassis and put it in the KDF60WF655?

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1694 Answers

SOURCE: picture fuzzy on SONY KP-57WS510

Sounds like bad tuner ( it is soldered in ).
I will research part numbers when i get to work today....T.

Posted on Nov 01, 2007

  • 395 Answers

SOURCE: lost remote reset chanels

the great thing about sony is you dont need the remote to do menu functions. there is a flip down panel in the front that has the menu, cursers, and select buttons. just select the tab you need in the menu (channels) select the type of input (cable :on/off) then auto program. be sure to have the VCR off so not to program the channel 3 only.

Posted on Jan 22, 2008

Slinteriors
  • 8617 Answers

SOURCE: chanel button or sony kp-51ws510 51 in rear projection

the circuitry within the TV is where your problem is. thats why your remote wont work it either. Could just be he wire arent pluged in completely or you could have a bad resistor on the control panel PC board. Hope this helps. Let me know if I can assist you any further.

Posted on Jan 22, 2008

  • 4234 Answers

SOURCE: Sony projection tv with dual tuners; only one tuner appears to be working now.

To verify that the tuner is the problem, move the cable from the second to the first. If you don't get a signal, the tuner is bad. The main tuner is part number 859843000 and is available for $47.38 from tritronicsinc.com

Dan

Posted on Oct 07, 2008

welcomejee
  • 10594 Answers

SOURCE: sony str-dg820. having a problem getting video on tv

Hook up Composite / Component Monitor Out wire from receiver to TV video input because receiver will not change analog input into HDMI
You need to connect receiver and TV through analog video terminals as above.
Actually you are expecting that receiver will convert DVD player and Xbox analog video input into digital HDMI signal for TV and This is incorrect.

Posted on Jan 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I put a sony cdx-ca700x in a 99 Dodge pickup cd player works can not get radio to program in stations do i need to hook up blue power antenna wire ????


Radio will not program in stations if the antenna is not working. Check the antenna to make sure stations are able be tuned in manually before using the auto program

Jun 04, 2017 | Sony Televison & Video

1 Answer

How do you hook up cords to cable box & television


WELL IT SEEMS U HAVE TWO PROBLEMS :
1ST YOUR rF SIGNAL IS NOT GETTING THRU , THIS IS A ROUND CABLE WITH A SCREW ON END TO IT , THIS ONE MUST 1ST COME INTO YOUR HOME AND GO TO CABLE BOX , THEN LEAVE OUT OF CABLE BOX AND ENTER VCR THEN LEAVE OUT OF VCR AND GO TO RF INPUT OF TV ( HAS TO BE HOOKED THIS WAY WONT WORK ANY OTHER WAY) SET OUTPUT OF VCR TO CHANEL 3 SET OUTPUT OF CABLE BOX TO CHANNEL 3 SET TUNER OF VCR TO CHANEL 3 , AND LAST SET INPUT OF TV TO rf CABLE ,CHANEL 3 , NOW YOU CHANGE CHANELS ON CABLE BOX only
2ND YOUR DVD PLAYER HAS NO RF OUTPUT SO YOU NEED TO CONNECT BY ONE OF THESE MEANS (HDMI, RGB, COMPOSITE) ALL THESE REQUIRE A DIFFERENT CABLE YOU DECIDE , THERE HOOK UP IS PRETTY MUCH ONE WAY SO I WONT ELABORATE ON EACH METHOD , BUT TV NEEDS TO BE SET TO CORESPONDING INPUT TYPE YOU DECIDED ON

Nov 11, 2015 | Magnavox DV220MW9 DVD Player VCR

1 Answer

I can´t sintonice more chanels than 17. How


If you have a cable system hook-up, in the menu setup there is a selection for type of TV signal, select cable and then select the auto channel tune feature.

Apr 29, 2010 | Panasonic PV-V4022 VHS VCR

1 Answer

CANT GET CABLE CONNECTED RIGHT


Hook a VCR to it with a tape playing and make sure the VCR RF switch is set to channel 3. Then do the auto search. If it still does not find channel 3, then your TV has a bad tuning circuit.

Aug 08, 2009 | Zenith C27A24T 27" TV

1 Answer

No channel below 7 when hooked direct to cable connection. Reset and auto program channels , only get 7 and up. This makes it unable to use VCR tuned to channel 4 or 3 . As well as not getting the lower...


low band in the tuner is bad .the tuner needs replacing. simple way to fix it use vcr or dvd with tuner
in it use video inpiuts on tv and use the tuner in vcr or dvd. works great

bc

Feb 25, 2009 | RCA F32650 32" TV

1 Answer

Sharp VCR hooked up to cable tv, i/p to vcr then out to tv.


I believe that I have the solution to that problem... When you are hooked up to cable or dish and use a VCR, you MUST have the program you wish to tape playing on the Cable or dish program, therefore the VCR needs to be tuned to channel 3 or 4 {whichever is the unused channel in your area) I believe that all you have to do is make sure that the TV is tuned to the channel you wish to tape and program the VCR to Channel 3 (at my area) or channel 4.

I hope this works for you. I have VCRs hooked up to all my sets and this is how mine work.
annabanana

Jan 23, 2009 | Televison & Video

2 Answers

Getting my VCR to record from the TV with a converter box hookup


Hook up antenna to converter box then from that out to the vcr's input (red,white, yellow connections are better than coaxial).

Jan 20, 2009 | Insignia Digital-to-Analog Converter for...

2 Answers

PURCHASED 52" LG LCD HAD A GREAT PICTURE.ALSO HAVE DIRECTV. TOUCHED THE MENU BOTTON SAW THE AUTO TUNING, THOUGHT THAT WOULD BE A GOOD FEATURE. WENT AHEAD AND LET IT RUN THROUGH ALL THE CHANELS. NOW IT...


Because you have DirecTV there is no need to use auto tuning. You simply changed inputs on the TV when you started auto tuning. Just use the input button on the remote to go back to the Direct TV receiver. Most likely it will be under Component (Color Stream) or HDMI input.

Dec 31, 2008 | LG RU-27LZ50C 27 in. HD-Ready LCD...

1 Answer

SANSUI TV/VCR


You can try codes for Orion, Emerson and RCA.

Aug 02, 2008 | Sansui COM3101 13" TV/VCR

1 Answer

Programming panasonic vcr


First, check in the VCR setup and see if it set for cable or off-air/broadcast/antenna (not always named the same).  If it is set for off-air... then it won't tune cable channels beyond 13.  It must be set for cable mode in order to tune those upper channels (mid-band, superband etc.).

I assume you have the VCR hooked up correctly- cable into VCR antenna/RF input, VCR RF/to TV output to the RF/Ant input of the TV.

Oct 15, 2007 | Panasonic AG-1980 S-VHS VCR

Not finding what you are looking for?
Sony Grand WEGA KDF-60WF655 60" Rear Projection HDTV Logo

Related Topics:

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

74106 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...