Question about Office Equipment & Supplies

You can divide 1 by 8 on your calculator and then add 13. I get 13.125.

Good luck,

Paul

Posted on Apr 09, 2015

Hi,

a 6ya expert can help you resolve that issue over the phone in a minute or two.

best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).

click here to download the app (for users in the US for now) and get all the help you need.

goodluck!

Posted on Jan 02, 2017

4/6

6/9

8/12

10/15

etc. Just keep multiplying by the same number on both sides.

6/9

8/12

10/15

etc. Just keep multiplying by the same number on both sides.

Apr 17, 2017 | Office Equipment & Supplies

The Fisher & Paykel Smart Drive and EcoSmart electronic washing machines are equipped with fault detecting software to help easily determine the cause whenever a problem occurs. Not like other electronic washing machines, these ones do not have displays to flash the code, but rather use the eight (8) light-emitting diodes (LED) of the Wash Progress indicators to indicate the fault code. The eight (8) LEDs stands as an 8-bit binary number (zeroes and ones) that must be decoded and then converted to the decimal number system to get the fault code.

The fault code can be decoded by determining which Wash Progress LEDs are lit. Once determined which of the LEDs are lit, write down the 8-bit binary code; 1 for lit LEDs and 0 for the off ones. For example; the final wash, rinse, and spin LEDs are lit; the binary code is 00001101. This in turn can be converted to the decimal number system by multiplying each digit with its corresponding place value then adding up the result. From left to right, the place values are 128, 64, 32, 16, 8, 4 , 2, and 1 respectively. Therefore, the decimal equivalent of 00001101 is 128(0) + 64(0) + 32(0) + 16(0) + 8(1) + 4(1) + 2(0) + 1(1) = 8 + 4 + 1 = 13; the fault code is 13.

The fault code can be decoded by determining which Wash Progress LEDs are lit. Once determined which of the LEDs are lit, write down the 8-bit binary code; 1 for lit LEDs and 0 for the off ones. For example; the final wash, rinse, and spin LEDs are lit; the binary code is 00001101. This in turn can be converted to the decimal number system by multiplying each digit with its corresponding place value then adding up the result. From left to right, the place values are 128, 64, 32, 16, 8, 4 , 2, and 1 respectively. Therefore, the decimal equivalent of 00001101 is 128(0) + 64(0) + 32(0) + 16(0) + 8(1) + 4(1) + 2(0) + 1(1) = 8 + 4 + 1 = 13; the fault code is 13.

on Apr 17, 2010 | Electrical Supplies

The Fisher & Paykel Smart Drive and EcoSmart electronic washing machines are equipped with fault detecting software to help easily determine the cause whenever a problem occurs. Not like other electronic washing machines, these ones do not have displays to flash the code, but rather use the eight (8) light-emitting diodes (LED) of the Wash Progress indicators to indicate the fault code. The eight (8) LEDs stand as an 8-bit binary number (zeroes and ones) that must be decoded and then converted to the decimal number system to get the fault code.

The fault code can be decoded by determining which Wash Progress LEDs are lit. Once determined which of the LEDs are lit, write down the 8-bit binary code; 1 for lit LEDs and 0 for the off ones. For example; the final wash, rinse, and spin LEDs are lit; the binary code is 00001101. This in turn can be converted to the decimal number system by multiplying each digit with its corresponding place value then adding up the result. From left to right, the place values are 128, 64, 32, 16, 8, 4, 2, and 1 respectively. Therefore, the decimal equivalent of 00001101 is 128(0) + 64(0) + 32(0) + 16(0) + 8(1) + 4(1) + 2(0) + 1(1) = 8 + 4 + 1 = 13; the fault code is 13 which is a pump fault.

Once the code is determined, search the web for the meaning and indicate it when requesting for an online assistance to facilitate a quick and precise response.

The fault code can be decoded by determining which Wash Progress LEDs are lit. Once determined which of the LEDs are lit, write down the 8-bit binary code; 1 for lit LEDs and 0 for the off ones. For example; the final wash, rinse, and spin LEDs are lit; the binary code is 00001101. This in turn can be converted to the decimal number system by multiplying each digit with its corresponding place value then adding up the result. From left to right, the place values are 128, 64, 32, 16, 8, 4, 2, and 1 respectively. Therefore, the decimal equivalent of 00001101 is 128(0) + 64(0) + 32(0) + 16(0) + 8(1) + 4(1) + 2(0) + 1(1) = 8 + 4 + 1 = 13; the fault code is 13 which is a pump fault.

Once the code is determined, search the web for the meaning and indicate it when requesting for an online assistance to facilitate a quick and precise response.

on Apr 14, 2010 | Fisher and Paykel GWL11 Top Load Washer

Hi John:

1 divided by 4 is

1 decimal 00 (1.00) divided by 4

100 divided by 4 is 25

1.00 divided by 4 is .25 (Decimal 25)

Hope this helps.

1 divided by 4 is

1 decimal 00 (1.00) divided by 4

100 divided by 4 is 25

1.00 divided by 4 is .25 (Decimal 25)

Hope this helps.

Oct 14, 2015 | Office Equipment & Supplies

Despite the goodies this calculator has, it does not have a key for the percentages.

To convert a decimal number to %,**move the decimal mark two places to the right and put the % symbol.**

**0.257** =0.257* 100%=**25.7 %**

To convert a percentage into its decimal equivalent,** move the decimal mark two places to the left and remove the % symbol.**

**89.32% =0.8932**

To convert a decimal number to %,

To convert a percentage into its decimal equivalent,

Feb 03, 2014 | Texas Instruments TI-84 Plus Silver...

x^2+13x+15=0

Recall (x+a)^2=x^2+2ax+a^2

Write x^2+2*(13/2)x+15, and compare the terms in x.**a=13/2**

x^2+13x+15=x^2+2(13/2)x**+(13/2)^2-(13/2)^2**+15

The first three terms are the expansion of** (x+13/2)^2**

You expression is equivalent to

(x+13/2)^2-[(13/2)^2-15]=(x+13/2)^2-[SQRT(109)/2]^2

Use the identity for the difference of two squares a^2-b^2=(a-b)(a+b)

This gives

x^2+13x+15=(x+13/2)^2-[SQRT(109)/2]^2=

**[x+13/2 -SQRT(109)/2][x+13/2+SQRT(109)/2]**

The polynomial can be written as (x-a)(x-b) (Note a has nothing to do with the one used above to complete the square. You can use any name for the roots, x_1, x_2, anything.

The two roots are on the screen captures below.

PS. I prefer to manipulate exact expressions with radicals. If you do not like it use the decimal approximations.

Recall (x+a)^2=x^2+2ax+a^2

Write x^2+2*(13/2)x+15, and compare the terms in x.

x^2+13x+15=x^2+2(13/2)x

The first three terms are the expansion of

You expression is equivalent to

(x+13/2)^2-[(13/2)^2-15]=(x+13/2)^2-[SQRT(109)/2]^2

Use the identity for the difference of two squares a^2-b^2=(a-b)(a+b)

This gives

x^2+13x+15=(x+13/2)^2-[SQRT(109)/2]^2=

The polynomial can be written as (x-a)(x-b) (Note a has nothing to do with the one used above to complete the square. You can use any name for the roots, x_1, x_2, anything.

The two roots are on the screen captures below.

PS. I prefer to manipulate exact expressions with radicals. If you do not like it use the decimal approximations.

Jan 18, 2014 | Texas Instruments TI-84 Plus Calculator

A number with a periodic decimal representation cannot be equivalent to a fraction with denominator 10 (or a multiple of 10) except if the repeating decimals are zeros.

0.454545...=45/99=5/11

0.454545...=45/99=5/11

Sep 04, 2013 | Super Tutor Pre Algebra (ESDPALG)

change your mode to binary , then enter your decimal no in dec link and then press bin link you can get the binary equivalent

Nov 28, 2009 | Casio CFX-9850G Calculator

VX8500 does not have an ESN. The VX8500 has an MEID. The MEID is a 14 digit hexadecimal value with the following format:

The decimal representation is calculated as follows:

a). Separate the 14 digit hexadecimal MEID into two parts:

Part 1 – the first 8 digits representing the manufacturer code (digits RRXXXXXX in

the figure).

Part 2 – the last 6 digits representing the serial number. (digits ZZZZZZ in the figure).

b). Convert the hexadecimal value of each part into the decimal equivalent:

Part 1 – 10 decimal digits zero filled.

Part 2 – 8 decimal digits zero filled.

If the decimal equivalent of each part is less than the number of required digits, right align

and zero fill to create the required length.

c). Concatenate Part 1 and Part 2 to create an 18 digit decimal number.

Example:

Hex MEID = AF 01 23 45 0A BC DE

Part 1, manufacturer code is 0xAF012345 = 2936087365

Part 2, serial number is 0x0ABCDE = 00703710

Therefore, the decimal representation of the MEID is 29360 87365 0070 3710

The decimal representation is calculated as follows:

a). Separate the 14 digit hexadecimal MEID into two parts:

Part 1 – the first 8 digits representing the manufacturer code (digits RRXXXXXX in

the figure).

Part 2 – the last 6 digits representing the serial number. (digits ZZZZZZ in the figure).

b). Convert the hexadecimal value of each part into the decimal equivalent:

Part 1 – 10 decimal digits zero filled.

Part 2 – 8 decimal digits zero filled.

If the decimal equivalent of each part is less than the number of required digits, right align

and zero fill to create the required length.

c). Concatenate Part 1 and Part 2 to create an 18 digit decimal number.

Example:

Hex MEID = AF 01 23 45 0A BC DE

Part 1, manufacturer code is 0xAF012345 = 2936087365

Part 2, serial number is 0x0ABCDE = 00703710

Therefore, the decimal representation of the MEID is 29360 87365 0070 3710

Sep 10, 2009 | LG CHOCOLATE VX8500 Cellular Phone

Three was I know of... a fraction is recognized by a calculator...

if you want to put in the decimal equivalent as example..

one half is .5

or 1/2

and it will only display the decimal equivalent.

Then there is scientific notation EE

EG... .5 = 1/2 = 5.0 EE-1

if you want to put in the decimal equivalent as example..

one half is .5

or 1/2

and it will only display the decimal equivalent.

Then there is scientific notation EE

EG... .5 = 1/2 = 5.0 EE-1

Aug 10, 2009 | Texas Instruments TI-83 Plus Calculator

40 people viewed this question

Usually answered in minutes!

×