Red light flashing 4 times what is the problem

Amigo Scooter Oxygen Tank Holder Light flash key turned ...

www.fixya.com > ... > Amigo > Amigo Scooter Oxygen Tank Holder
... key on my phoenix 3 scooter the red light flashes 5 times and the scooter will ...scooter wont move,although on the little speedo there is a red light flashing on ... ...light is flashing when the key is turned on. the scooter does not move at all ... flash up and down the console light and you at this point have to turn the key off ...

My pharmore wizard diagnostic light flashes 9 times and my ...

www.fixya.com/.../t25197681-pharmore_wizard_diagnostic_light_flashe...

Oct 8, 2014 - my pharmore wizard diagnostic light flashes 9 times and my scooterdoes not go, can someone help me please - Mobility Scooters question. ... Have no manual for pharmore 4 wheeled wizzard light on but wont move ... Why did it stop working suddenly and is blinking console light in 5-blink sequence?

Your power supply board has failed.

I would take note of the message you are getting and buy a new battery. I believe the red flashing lights mean that one or more of the cells in the battery are dying, and it's best not to turn off alarm lights like these. Did the battery hold charge for a longer period than one hour before you started to see the flashing light warning?

4 flashing red light = av cable not connected. double check id av cable is connected properly. try using different av cable.

3 flashing red light = hardware problem . may require repair

2 flashing red light = overheating

1 flashing red light on bottom right LED with error code = hardware failure may require repair

Never a good sign when you have red flashing codes

4 times, Diagnosis: Vertical deflection stopped. Possible causes: +- 15V is not supplied. (D board), IC8003 is faulty. (A board) Symptoms of the problem: TV has entered standby state after horizontal raster, Vertical deflection pulse is stopped, Power line is shorted or power supply is stopped.


Please rate my help++++Thanks for using FIXYA

turn tv on picture comes up 2to3 seconds later tv blacks out then stand by red light flashes 4 times in a row repeatedly..can not turn on or off when stand by light starts flashing but before tv blacks out you can turn tv on and off repeatedly and picture and sound work.You have to unplug power cord for 30 seconds after stand by light comes on to get tv to turn on.

Your projection bulb blew out.

The red light should be blinking a code. For example it will blink 4 times pause then 4 times pause or 5times pause 5 times pause, whatever the error might be. Let me know what it is and then we can help more.

Tim
[email protected]

MINE DID THAT AND IT WAS THE THERMOSTAT FOR THE BULB

4 red light flashes normally means there is a problem with the fan. Time to make a service call.