Question about Office Equipment & Supplies

1 Answer

How do i find overall control board firmware for bh c6000?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 79 Answers

BH being biz hub minolta try a download on flash drive. But the extra twist is firmware has a very specific proceedure (on off wait for this hit enter after that) It may be easier and safer to make that that call. $120 labor for copier tech to come out, and you might get a good cleaning and intel on PM time and/or quality part replacement. ie feed tires Doc feeder sep pad//scan lines/voids. Bottom line is I was a Copier tech for 25 years and the firmware updates came when there was a model wide broadcast or you had a serious issue involving intermittent problems or a few" head-scratchers" at one time. get the most out of your service call, but try to keep tech under an hour or two. ~~ SC

Posted on Apr 09, 2015

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Por que impressora konica minolta bizhub c6000 apresenta error 2703

Check the Cyan Charge Corona housing. Remove it and reseat it. IF not that check the HV board. and or connection at the back of the drum and transfer middle assy.

Oct 16, 2014 | Konica Minolta Bizhub Press C6000 Copier

1 Answer

How to fix 2231 error code?

Could be one of these, start first with the Y drum
Anything else get a tech out power supplies and printer control boards are serious money$$$$$$$$$$$$$$$
• Printer control board
• Drum motor /Y (M14)
• Encoder sensor /Y1
(PS81), /Y2 (PS82)
• DC power supply /2
• Drum Unit /Y

May 18, 2014 | Konica Minolta Konica Kit For Bizhub Press...

1 Answer

Konica Minolta C6000 error code C6801

After the sub power switch
(SW2) turns ON, the
communication between
the overall control board
(OACB) and the operation
board /1 (OB1) is not
started within a specified
period of time.

Had these boards been replaced recently???? If not will require you to the check each connector remove one at a time and check each connector on the boards for a bend pin this will be time consuming worse case you have a Bad board (S) SERIOUS $$$$$$$$$$$$$$$$. Also mite want a tech to come out and check that firmware is not bad. Can only get firmware from secure Konica Minolta Web site.

May 16, 2014 | Konica Minolta bizhub C450P Laser Printer

1 Answer

IC 601 controller is connected to my konica minolta bizhub C6000 printer but display is showing controller is not connected

check the cable between the print controller/firey and the copier, also is the print controller/firey set up for a c6000

Feb 07, 2014 | Konica Minolta Office Equipment & Supplies

1 Answer

Error c6704

Scanner image
processing board
• Memory control board /1
• Overall control board
• Printer control board

any one of the above boards$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ have tech come reflash the firmware first

Jan 23, 2014 | Konica Minolta Bizhub Press C6000 Copier

1 Answer

Bladez prisma treadmill error e1 replaced lower control board and speed sensor

I will answer my own problem here, maybe it will help someone else. After BH North America customer service told me I needed a new lower control board and I had to spend $100+, it wasn't the board. Then they said it was the speed sensor, they sent that out for free, that wasn't it. Now, they would not respond to me. So, we went off the troubleshooting guide saying it was a connection problem between the upper and lower board. My husband opened up the "leg" of the treadmill and checked the connections (cutting the tie cords that hold the wires tightly in place, maybe too tightly and that's what caused them to come unplugged) and now the belt runs! So, BH got another 100 dollars of my money, on top of the original $800 and solved nothing and then ignored my emails. Horrible customer service and when this one finally bites the dust, I will never purchase a machine from them again. P.S. This treadmill is only approx. 2 yrs old.

Feb 12, 2013 | Bladez Fitness Prisma Supra Folding...

3 Answers

Have error: C6000 on Kyocera KM-3050

Have Kyocera FS-1118MFPF that is coming up with Error C6000. Can we fix this ourselves

Aug 02, 2008 | Office Equipment & Supplies

3 Answers

BH C250 and the Stapler FS-501

Check the 2 covers (one screw on each) where the output elevator tray attaches to the finisher.

Mar 04, 2008 | Konica Minolta bizhub C250 All-In-One...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts


Level 3 Expert

102366 Answers


Level 3 Expert

7993 Answers


Level 3 Expert

75822 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides