Question about Washing Machines

1 Answer

Zanussi zde47100w what else can a e62 error be

My dryer (zanussi zde47100w)has an E62 error code i have changed the heater unit but it is still in fault what else can it be?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 899 Answers

E62, is a faulty heater unit, faulty wiring or faulty main control board. You have already changed the heater unit so check all wiring. If OK, then you will probably be looking at a new control board.

Posted on Apr 09, 2015

  • paul mccullough
    paul mccullough Apr 09, 2015

    Thanks. I think I have cracked it now. Had to reset the fault code by turning the dial to position 1 and holding the left button. Has since done a couple of full cycles without any faults

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a code e62 on my dryer


did some research might be a faulty heater or some kind faulty wiring or some kind of circuit board failer. i checked on youtube where i guy talks about errors and he explains them too. Tumble Dryer Error Codes E61 E62 E63 E64 E65 E66 E67 Electrolux AEG Zanussi so try watching this video this help you on what you can do more for your dryer..

Jun 23, 2017 | Computers & Internet

1 Answer

Why is my zanussi machine 6k9 1200apm error code e60


Family error code E60 is visible to customers and (could be E61,E62,E66,E68 and E69 only visible in service mode) means problem with heating phase.
Possible failures : heating element faulty, NTC sensor faulty,
PCB faulty, wiring.


Dado

Feb 29, 2016 | Zanussi Washing Machines

1 Answer

Electrolux dryer error code e62


Good Afternoon Friend,

I understand you are receiving an E62 error code on your Electrolux dryer, model# EIED55H. I suggest resetting your appliance, by either unplugging it or shutting the power off at your home's circuit breaker, for 3-5 minutes. Restore power and start any cycle. I ask that you please follow up with a comment on the post, at your convenience, to advise if further troubleshooting is needed or if your dryer status has changed successfully. Hope this is helpful.

-Best Regards-
WP

Jun 11, 2014 | Electrolux EIED55H Dryer

1 Answer

Why is my dryer beeping and showing E60?


24386410-hf2jxxovvq5cn05mugly0fcq-2-0.jpg

The last alarm code memorized can be displayed even if the appliance is in normal operating mode (e.g. while the drying programme is being performed): - Press (start/pause) and first option button simultaneously for at least 5 seconds: the display shows the last alarm.The alarm sequence continues to flash as long as the two buttons are held down.
The appliance continues the cycle while the alarm codes are being displayed. If the appliance is in programme selection mode, the options previously selected are stored in memory.

E60 is family fault code but after reading last alarm you will see exactly fault code (E61; E62; E63)

E61 - Insufficient heating (maximum time exceeded)
  • Heater unit faulty
  • Wiring faulty
  • NTC sensor incorrectly calibrated/out of position
  • Electronic board faulty
E62 - Power reley to heater unit faulty
  • Heater unit faulty
  • Wiring faulty
  • Electronic board faulty
E63 - Intervention of auto-reset thermostat on the heater unit
  • Thermostat faulty (replace heater unit)
  • Heater unit faulty
  • Wiring faulty
  • Electronic board faulty

Dado

May 10, 2014 | AEG T57800 Electric Dryer

1 Answer

Error E60 dryer


E61 - Insufficient heating (maximum time exceeded)
E62 - Power relay to heater unit faulty
E63 - Intervention of auto-reset thermostat on the heater unit.
E64 - Heater thermostat.
E65 - Fan motor triac faulty.
E66 - Fan motor thermal protection.
E67 - Triac control faulty.


Dado

Apr 25, 2014 | AEG T58840 Dryer Electric

1 Answer

E62 code on display


E62 - Power relay to heater unit faulty
Could be:
  • Heater unit faulty.
  • Wiring faulty.
  • Electronic board faulty.
At this fault appliance forced cooling cycle.

Dado

Mar 11, 2014 | AEG T57800 Electric Dryer

1 Answer

AEG Dryers e60


You have not specified the model of tumble dryer, so maybe some of the following fault codes not related to your appliance.

E61 - Insufficient heating (maximum time exceeded)
E62 - Power relay to heater unit faulty
E63 - Intervention of auto-reset thermostat on the heater unit.
E64 - Heater thermostat.
E65 - Fan motor triac faulty.
E66 - Fan motor thermal protection.
E67 - Triac control faulty.

Dado

Feb 23, 2014 | AEG Dryers

1 Answer

WASH MACHINE NOT WORKING RIGHT


E62 Overheating during washing --- Drain, end of cycle.
Try changing temperature or cold wash.
Click if helped pl.

Apr 24, 2013 | Zanussi Washing Machines

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

Brad Brown

Level 3 Expert

15441 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...