Question about Vacuums
You should be able to find a replacement at a hardware store. Take the plug end with you to get any assistance in determining the cord wire guage.
Posted on Apr 08, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: dog chewed cord
Dog chewed cord
Posted by jnunez918 on Jun 20, 2008
My dog chewed through the power cord (luckily unplugged). Are there replacement parts available and I can't seem to find out to detach the cord from the unit.
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. There are replacement parts available for the replacement of the power cord and to check your owner’s manual to see the schematics of the replacement of the cord. You can check with your local vacuum cleaner dealer in your area or you can call cust serv @ Bissell @ the phone # listed below. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
http://www.bissell.com/ Customer Service 1-800-237-7691
Hours of Operation Monday thru Friday 8:00 am to 10:00 pm EST
Saturday 9:00 am to 8:00 pm EST Mail To: Headquarters, Bissell Homecare Inc
P.O. Box 3606 Grand Rapids. MI 49501
Thanks, Don the Vac Man
Go Ahead. Use Us.
Posted on Jun 25, 2008
SOURCE: dog chewed power cord
you have to take the machine completely apart and get inside where the motor is.take the cover off there are 3 screws 2 on the left side behind the hose and 1 on the right side back by the wheel.that will take the covr off.now where the upright sets on the base you will see a ******** each side of the motor, take those off,that will seperate the upright from the base.now you have to open the motor housing,there are 4 screws 2 on the front side and 2 on the bach side that will expose the motor and the cord.take out the old cord and splice in the new one.then put it all back together in reverse of how you took it apart.please leave feedback
Posted on May 05, 2009
You can cut the bad section of wire out of the cord, cut the insulation on the cord to get to the wires. Match your colors, strip the insulation from the individual wires and twist together. Wrap each wire with electrical tape (making sure no wire is exposed, can be a fire hazard), then wrap the cord with electrical tape. The cord will be a little shorter, but should work fine.
Posted on Aug 14, 2009
Please check out this site. It should help you replace the cord.
Posted on Oct 21, 2009
You should be able to replace the plug, just follow the instructions on the replacement plug to insure you wire the proper polarity. Otherwise, you could create a potential for a shock. Not a good thing with a wet mop.
Posted on Oct 27, 2009
Tips for a great answer:
Apr 28, 2017 | Vacuums
May 01, 2016 | Vacuums
Oct 29, 2013 | Dyson DC17 Animal Bagless Upright Cyclonic...
Oct 15, 2013 | Vacuums
Mar 09, 2013 | Bissell PowerForce PowerBrush Deep...
Feb 21, 2013 | Hoover Tempo Widepath Upright Vacuum -...
Jul 10, 2010 | Dyson Ball DC24 Bagless Upright Vacuum
Feb 14, 2010 | Bissell 9500 ProHeat 2X CleanShot Upright...
Mar 30, 2009 | Dyson DC14 Bagless Upright Cyclonic Vacuum
Jun 20, 2008 | Bissell SpotBot Robotic Wet/Dry Vacuum
88 people viewed this question
Usually answered in minutes!