Question about RCA Televison & Video
Probably not. You need to get into the "utilities" menu, which is only accessible via the original remote (or possibly via buttons on the TV).
Posted on Apr 07, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Yes it might work, but if you want an original one you can go to www.discount-merchant.com?Click=48427 and look for the one for your TV
Posted on Aug 25, 2009
Hi,press the menu button on the front panel
while holding button on panel press and hold the menu button on the remote control
service menu will appear and then keep pressing the menu button until you come to lamp hour resetting
press ok on remote
and now lamp hour is reset
good luck with it and God bless!
Posted on Nov 03, 2009
Testimonial: "Thank you so much for this very necessary piece of information."
SOURCE: how do I reset the lamp meter?
That's total ****. When you buy a lamp from Panasonic, they give you instructions on how to reset the meter. You should NOT have to pay a technician for this information
Posted on Dec 28, 2009
here is a description of how to do it..
Warning: Perform lamp time reset only when the
lamp has been replaced.
Be sure the power cord is plugged into a
properly grounded wall outlet. Then, press
the POWER button on the projection display
or the remote control to turn the unit on.
Lamp time reset procedure for TY-LA1000, TY-LA1500
While pressing the VOL - (volume down) button on the projection display, hold down the PIP or SPLIT button on the remote control at same time for more than 5 seconds.
Lamp time reset procedure for TY-LA1001, TY-LA2006
While pressing the VOL - (volume down) button on the projection display, hold down the 0 button on the remote control at same time for more than 5 seconds.
For lamp part numbers TY-LA1000, TY-LA1001,
TY-LA1500, and TY-LA2006:
When reset procedure is complete, the screen on the left, or similar screen, will appear with the phrase LAMP TIME WAS RESET TO 0 (Most TVs).
Lamp time reset procedure for TY-LA2004, TY-LA2005
Press down both VOL - (volume down) button on the projection
display and MUTE button on the remote control at the same
time for 3 seconds.
When successful, the 2 LED’s on the front of the unit (Power and Lamp) will flash for 5 seconds.
If LED’s do not flash, repeat the procedure above.
Posted on Mar 25, 2010
Tips for a great answer:
Mar 26, 2012 | Panasonic PT-50DL54 50" Rear Projection...
Dec 19, 2007 | Zenith D60WLCD 60" Rear Projection...
Nov 07, 2007 | Zenith D60WLCD 60" Rear Projection...
52 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: