Question about Bunn Coffee Makers & Espresso Machines
I have a Bunn STX-20 coffee maker. It works fine when using the pour-over method, however it will not fill when connected to a water line. After turning on the On/Lower switch and then pushing the Start button, I hear a click as if the switch is working, but no brewing occurs. I have check the in-line regulator and verified that sufficient water pressure is available at the connection to the coffee maker.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: my bunn is too slow
Use the de-liming spring to clean the copper tube behind the spray head. Pour several pots of clear white vinegar through the unit to further remove lime and scale from the interior of your coffee maker. My Bunn is 24 years old, and the only replacement parts I've ever required are new carafes and the 4041 silicone washer repair kit.
Posted on Sep 19, 2007
SOURCE: Coffee maker not working
Please contact our Customer Service department at 1-866-901-BREW (2739) to make service arrangements.
and Try also
Step 1: Make sure you have 48 ounces of white vinegar on hand. You will also need an empty sink and a ceramic mug (do not use a paper cup.)
Step 2: Empty the water in the Water Reservoir b. FILL AND CLEAN
Step 1: Pour the vinegar into the Water Reservoir and fill it to the top edge of the clear viewing area.
Step 2: Place a ceramic cup in the Drip Tray and run a brew cycle. DO NOT USE A K-CUP…just press the Large Cup Button. Pour the contents of the cup into the sink.
Step 3: Repeat the brew process until the Water Reservoir is empty, pouring the contents of the cup into the sink after each cycle. Remember to open and close the lid between each cycle.
Step 4: Now fill reservoir with fresh water and let the Brewer stand for 4 hours while still on.
Step 5: Rinse the Water Reservoir thoroughly and fill with fresh water. c. RINSE Step 1: Ensure the Water Reservoir is filled with fresh water.
Step 2: Place a ceramic cup on the Drip Tray and run a regular brew cycle. Pour the contents of the cup into the sink.
Step 3: Repeat the brew process until the Water Reservoir is empty. Step 4: You may need to perform additional brew cycles if you notice any residual taste.
Regular cleaning (de-scaling) will prolong the life of the appliance. Scale is harmless, but left unattended, it can hinder optimal Brewer performance. De-scaling your Brewer regularly helps maintain the heating element, water reservoir and other parts of the Brewer that come in contact with water. Better water quality and water heating means a better cup of coffee. We recommend de-scaling your Brewer at least every 6 months (every three months if you are using hard water). The descaling process involves using 48 ounces of undiluted white vinegar.
Regular cleaning of the Brewer’s external components is recommended for proper operation. We recommend cleaning with a soapy, damp non-abrasive cloth. The K-Cup holder and funnel, drip plate, drip tray and removable water reservoir (on the Elite B40, Special Edition B60, and Platinum B70) are dishwasher safe. NOTE: the removable lid of the water reservoir is NOT dishwasher safe. The brewer should be descaled every 3-6 months.
Check out the Link for more information:
Don't forget to rate the solution
Posted on Apr 01, 2008
Hello. I would like to suggest that you pour in water, with a container under the funnel, until water does come out, it sounds like the water has just evaporated too far, and it requires more than a pot to bring it to the top. In the future, if you do not use it for a day or more, you need to unplug it, or just pour a pot of water in to keep it at level, as this unit heats all the time it is plugged in, and can actually evaporate all the water away, blow the element, damage the thermostat, or worse permanently damage the unit.
here you can find the user manual:
Hope that helps, and thank you.
Posted on Mar 23, 2009
Tips for a great answer:
Feb 13, 2013 | Bunn ICB-DV Coffee Maker
Sep 05, 2011 | Bunn Pour-Omatic Coffeemaker, 10 Cup White
Sep 20, 2010 | Bunn 10 Cup Home Coffee Brewer
Jul 15, 2010 | Bunn NHB Coffee Maker
Apr 12, 2010 | Bunn BX HOME BREWER 10-Cup Coffee Maker
Nov 16, 2009 | Bunn BX HOME BREWER 10-Cup Coffee Maker
Oct 12, 2008 | Bunn NHB Coffee Maker
Sep 15, 2007 | Bunn Pour-Omatic Coffeemaker, 10 Cup White
112 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: