Question about Audio Players & Recorders
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: CP685AVR/BF685 Power Contro.
It is likely the battery. These batteries are designed to last 3-6 years in a UPS. The good news is that if it is the battery, it is completely user replaceable and you'll have a Cyber Power unit that works just like new with a new battery. What may have happened is that the battery was weak, and you may have had a slight dip in the AC power. This caused the Cyberpower unit to switch over to the weak battery which couldn't handle the load. The unit then turned off. When you press the "ON" button, the unit will go through a self-test that checks all of the components and the unit will not turn on and be functional unless all of the components come back with a PASS, including the battery. If possible, test the battery with a voltmeter, it should read around 13.5, but not lower than 11.5v DC. However, with the unit over 3 years old, it almost certainly the battery. Here's a link to a replacement battery for the CP685AVR: http://www.batteryinternational.com/cyber-power-cp685avr-ups-battery-ups-batteries-f1.html
Hope this helps.
Posted on Jul 01, 2009
Possibly a bad ground. Ground directly to body.
Posted on Mar 22, 2016
Tips for a great answer:
Mar 22, 2016 | Dual Car Audio & Video
May 19, 2015 | Panasonic VIERA TC-P55VT50 55-Inch
A reset is done by following the below steps:
1. Disconnect the battery from handset(s)
2. Disconnect Phone Cord from wall jack
3. Disconnect Phone cord from base unit
4. Disconnect AC adapter from wall outlet
5. Allow to sit for 30 min
6. Reconnect Phone Cord to base
7. Reconnect Phone cord to wall jack
8. Reconnect AC Adapter to wall outlet
9. Reconnect battery into handset until you click or feel the plug snap into place
10. Re-Register Handset by placing on main base
Mar 13, 2015 | Uniden DECT 6.0 Cordless Phone ID
Feb 27, 2015 | Uniden Dect6.0 Digital Answering Syst W...
Jul 15, 2011 | Uniden Cordless Phone
Mar 08, 2010 | Uniden Cordless Phone
May 05, 2009 | Uniden Cordless Phone
Aug 24, 2008 | Uniden 5.8GHz Dual Cordless Phone
Aug 04, 2008 | Uniden 5.8GHz Dual Cordless Phone
47 people viewed this question
Usually answered in minutes!