Question about GE 30524ee3 3 Headset Corded/2 Cordless Dect 6.0 Answering Sys Lcd Display Used

2 Answers

I need a power adapter for telephone base for model 30524

I lost this cord and am seeking a replacement

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 774 Answers

Not a problem. Take the base unit with you to Radio Shack and they will get you a proper replacement. (The numbers on the plug in to the unit will say how many volts Direct Current are required to operate is properly and the tag underneath will also state how many milliWatts of power are required at that voltage.) The key is buying the proper plug in end that fits the socket. Radio Shack has units with several socket tips so you may select the proper one. Make sure the polarity of the socket plug you use matches the wire polarity... the stripe on one side of the power cord is the + side on the socket tip.

Posted on Apr 04, 2015

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • GE Master
  • 10,875 Answers
Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I access the battery in the cordless handset


GE 30524EE2 DECT 6.0 Corded/Cordless
Don, Battery replacement is on page 13 on the first link. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
GE 30524EE4 User Manual Battery Installation
http://www.videofon.rs/ge/pdf/30524.pdf
http://www.101phones.com/pdf/ge/30524-user-guide-english-f.pdf

Apr 05, 2016 | GE 30524EE2 DECT 6.0 Corded/Cordless...

1 Answer

I have a Dell laptop with lost power cord what could I use in place for a power cord to use laptop


There are many replacements that can be found from your laptop manufacturer or websites like Newegg or Amazon. Many third party brands make replacement power adapters often for lower costs.

You first need to determine your power needs based on your computers model number.

Dec 30, 2015 | Dell Computers & Internet

1 Answer

How do i get volume on my binatone 3325 handset


Press C/8 to unmute the microphone.

complete installations
Plug the power adapter
& line cord
into the base station.
Plug the power adapter into a 230Vac, 50Hz
mains socket, the other end of the line cord
into your telephone line socket.
Warning: Always use the line cord provided in the box.
Other line cords may not be compatible and may not work.
Warning: Only use the power adapter supplied.
Others will result in non-compliance with the safety
specification EN60950, and will invalidate any approval
given with this apparatus.
Warning: The Base unit needs mains power for
normal operation, not just for charging the handset batteries.
Installing and charging the batteries
Slide open the battery compartment cover.
Place the 2 batteries with the correct polarity,
as shown.
Slide the battery compartment cover back.
Put the handset on the base and charge for
15 hours before first time use. The handset
beeps when charging starts.
Warning: Only use the AAA size NiMH rechargeable
batteries.
If you have a Broadband Line
If you connect your telephone to a line with a broadband connection, you will need to
insert a micro-filter between the telephone and the telephone line, otherwise you may
get interference between the telephone and the broadband, which could cause
problems.
In a home with broadband, every telephone must have a micro-filter connected, not just the one at the telephone point that your modem is connected to.
If you need more broadband micro-filters, contact your broadband provider.

Connection and Conditions for use:
You can connect your phone to a direct exchange line (DEL) on a local
exchange with its own phone number; to an extension socket
connected to a DEL; or to an extension on an approved compatible
PBX. Do not connect as an extension to a payphone.
The ringer equivalence number (REN) of all equipment (phones, fax
machines, modems, etc.) connected to an exchange line must not add
up to more than 4, otherwise one or more of them may not ring and/or
answer calls correctly. This phone has a REN of 1, and most other
telephones have a REN of 1 unless marked otherwise.
Handset - Base Connection
1) When purchased, all handsets are already registered to the base unit
and should link to it when they are all powered up.
2) To use your cordless handset and base unit together, you must be
able to establish a radio link between them. The signal between the
handset and the base is in accordance with the normal standards for
a DECT phone: Maximum range up to 300 metres outdoors or 50
metres indoors. Be aware that:
> Any large metal object, such as a refrigerator, mirror or filing cabinet,
between the handset and the base unit may block the radio signal.
> Other solid structures, like walls, may reduce the signal strength.
> Other electrical equipment may cause interference and/or affect the range.
3) Do not place close to another telephone, a TV or audio equipment - it
may cause interference.
4) Out of Range warning. If you hear a warning tone during a call,
and/or the sound in the earpiece becomes faint or distorted, you may be
going out of range of the base unit, so move nearer to the base unit
within 20 seconds, otherwise the call may be cut off.

Jul 20, 2014 | Lands Phones

1 Answer

My Sony cordless handset doesn't work and displays "S/C Invalid".


  1. Place the handset in the base.
  2. Unplug the AC power adapter from the telephone base.
  3. Disconnect all the telephone lines from the telephone base.
  4. Allow the telephone base to remain without power for 1 minute.
  5. Connect all the telephone lines to the telephone base.
  6. Plug the AC power adapter back into the telephone base.

Aug 31, 2010 | Sony SPP A973 Cordless Phone

1 Answer

Dont know how to hook it up to phone...have S10A and S11 model plantronics corded headsets


Turn over the S11 base and insert the headset slot. This is at the top of the base. Remove the handset cord from your telephone base and plug into the handset jack (there will be a picture). Using the short cord that came with the S11, plug into the line jack on the back of your base and the other end into the slot on your telephone where you removed the handset cord. Plug the headset cord into the headset jack that is on your S11 base. Connect the the A/C power adapter to the S11 A/C jack and a wall outlet. Put on the headset. Press the handset/headset switch and pick up the handset off your telephone, set it aside to make calls. Slide the configuration switch (on the side of the S11 base) until you hear a clear dial tone.

Good luck from Headsets Direct!

Aug 24, 2010 | Plantronics (45647-04) for S10, T10, T20...

1 Answer

Uniden 5.8ghz cordless W/2handsets has no dial tone cannot call out or recieve calls


There can be a lot of different things that could cause this. The first thing I would do is disconnect the telephone cord from the Uniden phon eand connect it to another telephone and see if you get a dial tone from it. If you do then we know that the telephon eline and the cord are OK so we go back to the Uniden telephone. Next, does the unit light up when you plug it in? are you sure that the telephone is getting AC Power? Are the displays on the handsets working? Does the handset display show "Handset XX" or does it show "Searching"? If it shows "Handset XX" then the base unit is getting power, if not the base unit may not be getting power.
If the base unit is getting power and the handsets are working and the power cord and jack were proven good by conecting another phone to them, then you would need to call uniden Customer Service for further trouble shooting or repair/replacement. the number is 1-800-297-1026

Jan 26, 2010 | Uniden Cordless Phone

1 Answer

No dial tone after an electrical storm . I had to replace the AC adaptor. Everything else works.


Having to replace a power adapter indicates a pretty severe power surge that could easily have destroyed your Cordless Phone Base station delicate electronics!
But to ensure that it is not a faulty telephone line, plug a working corded telephone directly to the phone wall jacket and see if you get a dial tone.
Hope it helps: let me know how you go.

Jan 13, 2010 | Uniden Cordless Phone

2 Answers

My infor globe does not show the i d caller


for most problews, including caller id, follow these instructions in order:

Put the battery into the battery compartment and connect to the
connectors inside the battery compartment.
Connect the power adapter and telephone cord into matching jacks on the under side
of the base.
Plug the power adapter into the electrical outlet. Plug the telephone cord into the
telephone socket.

my caller id was not working, but everything else was. I followed the instructions above EXACTLY IN ORDER and the caller id is now working.

Jun 10, 2009 | Olympia InfoGlobe Caller ID

1 Answer

One one ring tone with incoming call..........


Make sure the ringer is on .
• Make sure the telephone line cord and power adapter are plugged in properly .
• The cordless handset may be too far from the telephone base. Move it closer to the telephone
base.
• There may be too many extension telephones on the telephone line to allow all of them to ring
simultaneously. Try unplugging some of them.
• If the other telephones in your home are having the same problem, the problem is in the wiring
or local service. Contact the local telephone company (charges may apply).
• Other electronic products can cause interference to your cordless telephone. Try installing your
telephone as far away as possible from the following electronic devices: wireless routers, radios,
radio towers, pager towers, cellular telephones, digital telephones, intercoms, room monitors,
televisions, VCRs, personal computers, kitchen appliances, and other cordless telephones.
• Test a working telephone at the telephone jack. If another telephone has the same problem, the
problem is in the telephone jack. Contact your local telephone company (charges may apply).
• The telephone line cord might be malfunctioning. Try installing a new telephone line cord.
• Remove and re-insert the battery and place the cordless handset in the telephone base.
• Wait for the cordless handset to synchronize with the telephone base. Allow up to one minute
for this to take place.
for more info download this http://www.vtechphones.com/docMgt/public/art/52882/6041_manual.i3.pdf

Apr 01, 2008 | Vtech Cordless 6041 Phone

Not finding what you are looking for?
GE 30524ee3 3 Headset Corded/2 Cordless Dect 6.0 Answering Sys Lcd Display Used Logo

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Radio Communications Experts

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

eradiostore
eradiostore

Level 3 Expert

1654 Answers

J.D. Browning
J.D. Browning

Level 3 Expert

2760 Answers

Are you a GE Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...