Question about Kitchen Appliances - Others
Serial # 5753 Factory 5410-0-001
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Globe Meat Slicer Model # 500
Fiber gear on blade hub stripped. deep socket required to remove hub. DON'T CUT YOURSELF!! remove motor, used food safe solvent to clean grease out of housing. Fiber gear held on with snap ring. Replace gear, repack housing, put hub and motor back and start slicing. Routinely check to make sure gear is lubed.
Posted on Dec 24, 2008
The stone that sharpens the back bevel is used for more time, but use grind for minimal amount of time, 30-40 seconds sounds extreme to me. The stone for the top surface of the blade is only pressed briefly to remove the slight burrs from sharpening on the back side of the blade.
Posted on May 22, 2010
First of all they have to be stainless , with out taking the hub out I guess you could bring the slicer to the hardware store and try serveral screws till you get the correct ones , I don't recall the size , maybe someone else on here will have the size for you
Posted on Dec 13, 2011
Tips for a great answer:
Dec 23, 2016 | Rival Food Processors
Jun 29, 2016 | Kitchen Appliances - Others
Feb 08, 2016 | Kitchen Appliances - Others
Dec 22, 2013 | Kitchen Appliances - Others
Oct 22, 2010 | Microwave Ovens
Nov 21, 2009 | Kitchen Appliances - Others
Oct 09, 2009 | Berkel 827E Gravity Feed Deli Meat Slicer
430 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: