Question about Echo 1 Chain Saw Carburetor Cs400 A021001310 Wt-820

1 Answer

I have a Echo chainsaw CS-400 and the carburetor has three nipples which two is on top of the carb and the other is at the bottom in a curve. which is the inlet for the fuel line with the filter

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Echo Master
  • 1,169 Answers

Walbro WT-820


I have a Echo chainsaw CS-400 and the carburetor h - 25627481-koqwcorimompzosvocgnrfbq-3-1.png

Posted on Apr 04, 2015

Testimonial: "So the suction side of the primer is what you're saying? And the fuel line with the filter goes to the fuel inlet?"

  • Eugene Rounds Apr 04, 2015

    Yes.

  • Demise Love
    Demise Love Apr 04, 2015

    one more question please? When I position the carburetor the silver vent is on top and the primer part is on the bottom near the fuel tank. The line is not long enough to reach the fuel inlet

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I received the cylinder assembly today. And when I opened up the package everything was there, but the ring for the piston was broken in half :


OH well free replacement is what you want then you will wait and why did you order from GREECE in the first place .

May 04, 2015 | Echo Cs-400 Chainsaws

2 Answers

Echo CS-400 chainsaw is it better to clean or replace the gaskets in the carburetor. .saw won't start?


replace,ethanol in the fuel eats rubber,try to use gas without ethanol

6119df52-0f5d-4ab1-ba8d-bb93ea627f4f.png


echo-cs-400-chainsaw-better-clean-or#cmnt-0-j2ewxe030upocnrrix5varvk-3-2.jpg


echo-cs-400-chainsaw-better-clean-or#cmnt-0-j2ewxe030upocnrrix5varvk-3-3.jpg


echo-cs-400-chainsaw-better-clean-or#cmnt-0-j2ewxe030upocnrrix5varvk-3-4.jpg

Apr 07, 2015 | Echo Garden

1 Answer

Echo Cs-400 chainsaw. Standing the carb up with the sliver vent on top which fuel line goes to the 90° inlet on the bottom and which line from the primer bulb to the carb?


The lengths of the line and,or the bends in the line . I would say the line from the bulb would go the carb since it is used to prime or,choke the carb.

Apr 05, 2015 | Echo Garden

1 Answer

Adjust the throttle on my echo cs305 chainsaw


Toni,
Can you give me a little more information on your problem. Are you having a problem with the throttle linkage or is it a carburetor adjustment question?

Dec 31, 2014 | Echo Cs305 Cs 305 Carburetor Intake &...

1 Answer

I have a wt820 carb on an echo cs400 how do the fuel lines route


wt820-carb-echo-cs400-fuel-lines-route-u2zok31ofbeqiqkdplhepnij-2-0.jpg which is for the fuel line with the filter and which is for the primer bulb?

Nov 13, 2013 | Poulan Pro 16-Inch 38 cc Anti-Vibration...

1 Answer

Idle to high


Make sure the carburetor was re-installed correctly as any air leak between the carburetor and cylinder will cause high engine speeds but almost no power. It can also scuff the piston/ring(s) and cylinder due to very lean lubrication from the fuel. Hope this helps!

Jul 12, 2010 | Echo CS400 18" Chain Saw

Not finding what you are looking for?
Echo 1 Chain Saw Carburetor Cs400 A021001310 Wt-820 Logo

315 people viewed this question

Ask a Question

Usually answered in minutes!

Top Echo Garden Experts

Jim London
Jim London

Level 2 Expert

257 Answers

Roland W VanLue
Roland W VanLue

Level 3 Expert

486 Answers

colesmowers

Level 2 Expert

38 Answers

Are you an Echo Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...