I am missing the power cord for my copypal ii dvd/cd duplicator, where can I buy that ?

If the LCD light on your Zenith CD/DVD duplicator is on but it is not showing as "ready," it is possible that there is an issue with the duplicator's internal components or settings. Here are a few troubleshooting steps you can take to try and resolve the issue: Check the disc trays: Make sure that all of the disc trays are closed properly and that there are no discs stuck inside the duplicator. If a tray is open or a disc is stuck, the duplicator will not be able to operate properly. Check the power source: Make sure that the duplicator is plugged into a working power source and that the power cable is securely connected to the duplicator. If the power source is not providing enough power, the duplicator may not be able to operate. Check the settings: Check the duplicator's settings to ensure that it is set up correctly for the type of disc you are trying to duplicate. For example, if you are trying to duplicate a DVD, make sure that the duplicator is set to duplicate DVDs and not CDs. Reset the duplicator: Try resetting the duplicator by unplugging it from the power source for a few minutes, then plugging it back in and turning it on. This can sometimes resolve minor issues with the duplicator's internal components. If none of these steps resolve the issue, it is possible that there is a more serious issue with the duplicator's hardware or software. In this case, it may be best to contact Zenith customer support or a professional technician for further assistance.

how to reset 1-11 dvd techcom controller.
-when it is on aqnd the screen shows copy use the top arrow key to move to setup when in setup look for reset

This is a relatively standard 120V cord that you are missing.
Commonly found plugged into DVD players and VCRs. If you have an old DVD player or VCR, see if you can't snag the power cord from it, and use it to connect the Inverter to the outlet.
Or buy one.

From Google .. Download Tower CD&DVD Duplicator 8 Bays Manual.. But You May Have to ente the Brand and Model good luck

start all over again for better burning cd and printing of labels.

What drive is monted... i have montet Plextor PX860 and they works..only thing I would like to have a drive with a more stable drive bay .. they are as "lightweight" as possible...

I went on the Internet and found someone who does repairs. I mailed the unit yesterday. Hope it doesn't cost too much!

click on hyperlink:

buy replacement ac power power cord charger adapter MINTEK MDP-1815

http://www.18002526123.com/products.aspx?type=pa&view=104&p=34&sc=6

Could be a bad door sensor. What error message do you get once you close the door?

- techwaredist