Question about Televison & Video

1 Answer

My plasma won't turn on. Is it worth fixing? ?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Televison & ... Master
  • 74,383 Answers

Fault in the main power supply regulator board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

Posted on Apr 04, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Samsung plasma pn50b450b1d clicks and won't turn on


It's probably the power supply module. Might not be worth repair unless you can buy it and install it yourself.

Feb 15, 2016 | Televison & Video

1 Answer

My 50pk750 tv won't stay turned on.


You own a plasma tv throw it away and buy either lcd or led Your tv is not worth fixing buying a new one will be cheaper and will last longer

Jan 11, 2014 | LG 50PK750 50 in. Plasma HDTV

1 Answer

We were watching the tv and it turned off and now it won't turn back on. we have never had any problems with it before.is it worth gettinh fixed.is there a rest button?


Tv now turn on have no power to the tv at all or the tv power LED light on the tv just blinks.Tries tv unplug,replug the tv back like about an hour,that the resetting tv back to the factory setting.The tv should working again now.If not the tv power supply board it is dead that the board where the power a/c cord plug into it,tv must be repair by replacing components parts or the tv whole power supply board.The tv shop should cost u like about half of the price of a new tv.

May 11, 2011 | Sanyo DP50747 50 in. Plasma TV

1 Answer

Have Plasma TV HP-S4253 Have sound but no picture (first turn on picture comes on for 5 seconds) Is this worth fixing?


it may be the lamp in the screen has gone bad the tv is worth replecing more than fixing cuause a screen costs almost as much as a tv

Jan 02, 2011 | Samsung Televison & Video

1 Answer

Plasma tv bad picture - something thrown at screen


Not worth fixing,if LCD,Plasma,DLP screen pannels is damage or broken only worth as salvage electronics boards parts.Because the tv corporations produced it limited LCD,Plasma or DLP screen pannels.They're the only one able to sell u the screen pannels,but they will sell it to u same as a new tv,might even cost more after the Plasma screen part is put in.Because of the labors.

Apr 26, 2010 | Sony BRAVIA KDL-40S2000 40 in. LCD HDTV

1 Answer

42 plasma made a loud pop then shut itself off when i try to turn back on it imediately turns itself back off


Could be a part that went in the power section. You are going to need to take it to the shop for repairs. So you want to make sure if you have any warrenty first. Then you want to check the repair cost estimate and you want to know what a replacement tv is worth. It should be worth fixing but you alway need to keep in mind that a new replacement might not be much more and it has warrenty.

Mar 23, 2010 | Insignia 42" Flat-Panel Plasma HDTV

1 Answer

I have a 42'' plasma is it worth fixing it


Definitely worth fixing. You may be able to locate an inverter on the internet. Try ebay first. Have seen the inverter for that set for under $50.00

Sep 25, 2009 | Vizio P2 42 in. HD-Ready Plasma Television

1 Answer

LG plasma tv made loud popping noise


The plasma gas tubes may be damaged or the gas couldve leak out. remember plasma have to remain upright at all times even when transporting them, if they are not you should just set it up straight for about 3-4 hours before turning it on.

Apr 23, 2009 | LG 50PX5D 50 in. Plasma HDTV

1 Answer

Pioneer plasma PDP-436PG


pretty much imposible. Not worth the money (if pioneer would do it) to fix it. The only this its good for is to sell it for parts the are still good on ebay or w/e. Best of luck

Jun 14, 2007 | Pioneer PDP-4360HD 43 in. Plasma...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74383 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...