How to remove the M and D please ??? - Miscellaneous

1) Switch the system on. Can you tell me if the power button is flashing amber or a solid amber? Please also tell me if you notice any diagnostics LEDs staying lit - these are labelled 1,2,3 and 4 and are near the front headphone sockets
2) Please remove all peripherals at the back of the system and switch the system on. Does this affect the power button LED or diagnostic LEDs
3) Have you added any components to the system e.g. video cards, sound cards etc...
4) Please open the system and remove the following components:
a) Power and data cables from hard drives and optical drivesb) Any PCI/PCI-Express expansion cardsc) All memory from the systemd) The system fan
5) With the above removed, please reconnect the power cord to the back of the system and switch the system on. Please make a note of what happens with the power button LED and the diagnostic LEDs
6) If there are no changes to the power button LED or diagnostic LEDs, please remove the power cord from the back of the system and remove the following components:
a) I/O panel cableb) CMOS battery
7) With the I/O panel cable and CMOS battery removed, please connect the power cord to the back of the system. The system should automatically try to switch on. Do you hear any beeps from the system? If so, can you tell us exactly what you hear?
If you need any assistance with removing these components, please see the User Manual here: http://support.euro.dell.com/support/edocs/systems/op380/en/index.htm
Please keep us updated on how you get on!

A. Please click start, click control panel, click Programs and Feature(Add or remove if you have Windows XP) and then find Nfs mw speed.exe listed there. Please try to remove it from there.

B. To remove malware/adware/spyware:
Please scan your computer using free version of Superantispyware.
http://www.superantispyware.com/
Please run quick scan.

Please remove batteries and use a blow drier on low setting to remove moisture from phone. ( Please do not heat battery)

Hi.

If you dont remember the BIOS password, you may remove it by resetting the BIOS password.

Please follow the below steps to reset the BIOS password:

1) Please remove the bottom casing of the Notebook.
2) Once you have removed the below casing, you should be able to see a CMOS Battery.
3) The CMOS Battery will be of a size of a coin.
4) Once you have found the CMOS Battery, please remove and re-insert it again.
5) The CMOS Battery will have the information about the Computer Date, time, BIOS Password etc.,
6) Removing and re-inserting the CMOS Battery will reset these settings, which will also remove the BIOS password.

Please perform the above steps and let me know the results.

Hope this helps.

Please feel free to contact for further information and assistance.

• To resolve this issue remove the cartridges and then the printhead (To remove the printhead: Upon removing the cartridges push the small grey tab upwards.)
• Remove power
• Please now check for any objects or paper that might be obstructing the movement of the printer carriage - if any are found please remove them
• Wait 5-7 minutes
• Reinsert power
• Reinsert printhead (When inserting the Printhead please ensure that you hear it click into place)
• Then re-insert cartridges, black first then colour.Please also ensure that you hear them clip into place
• If the error persists, please advise us on where the error appears and what the exact wording of the error is along with any error lights.

simply pull tha airbag fuse. remove the 4 torx head screws behind the airbag and remove airbag. unplug the electrical connector. remove the big nut holding the steering wheel. use a puller to remove the steering wheel.

This will help. Thanks please keep updated.please do rate the solution positively .thank you for using fixya

You could use a photo editor like Photoshop Elements to remove it.

Clean install process:

Please follow the steps below: Remove Easyshare Software Click on 'Start' -> 'Settings' -> 'Control Panel' -> 'Software' Please choose 'Kodak Easyshare Software' Please choose 'remove' Please click on 'next' when installation wizard shows up Please choose 'remove' and click on 'next' Please click on 'next' to start the removal of your Easyshare Software. Please make sure that all files of your Easyshare Software has been removed from your system successfully. For remaining the progress please go to step 2. Even if you couldn’t remove the software or it is still in the list. For running Kodak Clear Utility: Please go to www.kodak.com/go/clear and follow instructions given on screen. Click on 'download'-button below on screen. Please choose 'open' and follow instructions given on screen. Please choose option 'save as' after choosing the download option to run clear utility from your PC. Please choose a save path. Open file clear5N.exe after file has been saved. Click on green starting arrow. The programme is running now. Please note! Please click on 'Ok' should messages appear for which you only have 'Ok' as an option that will make sure that you still run the programme. Should you been asked to restart your computer, please choose 'NO'. You receive the following message when the programme has finished: 'Easyshare files have been removed. Please reinstall Easyshare after system reboots'. Your computer will be restarted now. This action removes Easyshare Software from your system but it won’t delete any pictures or videos. But there is the possibility that you have to recreate your collection after reinstalling the Software. We recommend to download always the latest version of Kodak Easyshare Software. You have either the option to download the software free of charge by following the link: http://wwwuk.kodak.com/global/en/service/downloads/dln_ekn026079.jhtml?pq-path=4509

Contact KODAK:
http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490

10-12 mm

Hi,

Go to www.trendmicro.com and download the trial version of their antivirus it removes hard to remove viruses from computers and then you can remove it and put back an antivirus of your choice.

please rate me. thank you.