Question about Nikon D70s Digital Camera

3 Answers

My menu button is disabled, not working at all.

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 28 Answers

Hi everyone!
I see sometime the problem question is too general. I recommend more details like in sequence. Like I press all other button and something not working the detail!. Anyway, menu doesn't working then. You should check the button itself has the tension of pushing and returning. Also, all other button along with it checking how it responds. Most of kind this type of problem come from main pcb got defective unfortunately. Try to bring to your local repair shop. Since it is old digital unit, so they can give a little discount.
Hope you luck! A Professional Camera Clinic Guy!
If give more detail then I give more!

Posted on Apr 05, 2015

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Nikon Expert
  • 197 Answers

I had that happen recently on my D-90. I fixed it by removing and reinstalling the battery. Hasn't happened since. If you've already done that and it didn't help, I'd suggest contacting Nikon support at www.nikon,com to see what they suggest.

Some authorized repair shops have a flat fee for repair of various cameras, some more than others. If Nikon tells you it needs repair,
get repair estimates or flat fee charges from several different repair centers. Often, if a single part needs replacing, it may be a simple "unplug the old part and plug in the new part" type of operation that costs only a bit more than the cost of the part.


Also, when I broke the battery door on my D-90, the Nikon tech explained that I could fix it myself and he had just received a shipment of replacement doors. They cost about $3.00 each and I bought two. Your repair probably will not be that simple but Nikon may be able to give you some tips to help save you money and maybe keep you from having to junk the camera.

Posted on Apr 03, 2015

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Nikon Expert
  • 111 Answers

There is no way to disable the menu button. If the button does not function, it's broken and needs to be repaired, probably by Nikon. Given the age of the camera, repair will probably exceed its value. Sorry.

Posted on Apr 03, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Google not working internet stop working


Method 1 : Reset Internet Explorer
  • Open Internet Explorer.
  • Click on Tools menu (Press "alt" key to active menu bar).
  • Click on "Internet Options". a configuration window you will appear
  • Click on advanced tab.
  • Click on "Reset" Button. You'll get an another box, here check a box named as "Delete Personal Settings", then click on Reset button on it.
Method 2 : Disable Software Rendering. Disable Hardware Acceleration option in IE 9 & IE10
  • Open Internet Explorer.
  • Click on Tools menu (Press "alt" key to active menu bar).
  • Click on "Internet Options". a configuration window you will appear
  • Click on advanced tab.
  • Un-check a option named as "use software rendering instead of GPU rendering". it is located under "accelerated graphics".


Method 3 : Disable 3d in "NVIDIA Graphics driver" Disable "stereoscopic 3D" option into "NVIDIA Graphic driver" application. (If you have Nvidia Graphics Drivers & Software, If you don't have the you can leave that step)
  • Open Nvidia software from system tray.
  • Disable the option named as "stereoscopic 3D" from NVIDIA Drivers (NVIDIA driver is a computer Graphics drivers their software runs on system tray. )

May 29, 2015 | Alcatel Cell Phones

1 Answer

840,01 scanner disable error. how to solve it


This message indicates that the scanner has been disabled cannot be used. The MFP must be powered off and then press and hold the check and the right button and turn on the printer to access the configuration menu


1. In the configuration menu, use the arrow keys to scroll to the Disable Scanner menu item.

2. Press check button.

3. Use the arrow key to scroll to the desired setting. The options are Enable ADF/FB, Disable ADF/FB, Disable ADF only, Auto Disabled. (Please select Enable ADF/FB)

4. Press check button.

5. Press BACK button.

6. Scroll to Exit Config Menu.

7. Press check button. The device restarts.

8. Try running a copy from the ADF and flatbed.


For further assistance, please contact Lexmark Technical Support.

Jul 30, 2011 | Lexmark X364dn All-In-One Laser Printer

1 Answer

LG TV 50PQ300:'Keylock on' .Cannot select 'set up' or 'input'.only AV1 works. Can anyone help please???


Press and hold MENU buttons on front panel and remote control until service menu appears.
Press MENU button once again.
Disable HOTEL option.

I hope this helps!

Apr 08, 2011 | Televison & Video

1 Answer

The message prints out from my HP Officejet 7410: A communication error occurred during the transmission. Result Error 232* It was working fine before, now it won't fax 2 pages.


Actually Error 232 is mostly because of the Remote machine still we can try one thing in your machine ie - we can disable Error correction mode

How to disable it?


1. Press the or > button until the front display reads "Fax Setup".

2. Press the ENTER/MENU button.

3. Press the or > button until the front display reads "All Faxes".

4. Press the ENTER/MENU button.

5. Press the or > button until the front display reads "Error Correction".

6. Press the ENTER/MENU button.

7. Press the button until the font display reads "Off" and then press the ENTER/MENU button to save the setting. (Off disables ECM and On enables ECM).

Try to send fax now .. It should work

Please Vote for me if it works

Jan 04, 2011 | HP OfficeJet 7410 All-In-One InkJet...

1 Answer

The menu button on the tv won't work.


You may have a broken ground on the menu switch. I would say the remote does work. Or you may have a child lock intervention that only a remote can disable. Chances are you do need to resolder the menu button attached to the printed circuit.

Feb 26, 2010 | RCA F19262 19" TV

1 Answer

How to disable the resolution notice on VG930m


Use your monitor buttons to look for Resolution Notice and turn it off.

To disable the notice on ViewSonic 23" LCD Monitor , use the buttons on the
front of the montior to do the following:
* Press #1 button
* Use down arrow to highlight Setup Menu and press #2 button
* Use down arrow to highlight Resolution notice and press #2 button
* Select Disable and exit!!

To disable the notice on NEC LCD 1765 monitor
* Press button #5 on the monitor
* Scroll up and down the menu list with Montior Button #4 and then select
with Monitor Button #5. Go to "Advanced menu" set the Resolution notice to
OFF.

Nov 02, 2009 | ViewSonic Computers & Internet

1 Answer

My tft hpl1908w,is not starting up immediately when i switch on my pc.you have to switch off and on again several times so that it can start up.but onece started up there is no problem untill you switch it...


HP SUPPORT COMMUNICATION - CUSTOMER NOTICE Document ID: c01764371
Version: 1
Notice: HP Flat Panel Monitors - Pressing Menu Button Or Power Button Has No Effect Other Than To Display A Warning Message NOTICE: The information in this document, including products and software versions, is current as of the Release Date. This document is subject to change without notice. Release Date: 2009-06-05
Last Updated: 2009-06-05
DESCRIPTION Many newer HP monitors have a feature that allows users to disable the front panel Menu and Power buttons. When they are disabled, pressing them has no effect other than to display on-screen warning messages.
DETAILS If the Power button is disabled; pressing it displays this message:
Power Button Lockout
If the Menu button disabled, pressing it displays this message:
OSD Lockout
The buttons can be re-enabled as follows:
If the Power button is disabled, press and hold it for 10 seconds to unlock it.
If the Menu button is disabled, press and hold it for 10 seconds to unlock it.
NOTE If the Power or Menu buttons are not disabled, pressing and holding them for 10 seconds will disabled them. Here's the site.....
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=3548687&prodTypeId=382087&objectID=c01764371

Jun 28, 2009 | Computers & Internet

1 Answer

I have hp laserjet 3050 and i not able to receive fax


Hello Rupesh,

Following is the description for Error 232
A communication failure (comm error) has occurred between the two machines. OR The user at the remote machine may have pressed CANCEL. OR The power at the remote machine has been interrupted, or deliberately turned off, causing the fax session to be interrupted
  1. Re-attempt the fax reception at a different time when telephone line conditions have improved.
  2. If the error persists, and error correction is in use for the fax session, disable ECM
Disable V.34 on local machine V.34 is the modem protocol used by the product to send faxes. It is the worldwide standard for full-duplex modems sending and receiving data across telephone lines at 1,200 or 2,400 bps. The default setting for V.34 is ON.
Follow the steps below to disable V.34 setting.
  1. Press Menu/Enter.
  2. Press the < or > buttons to select Fax Setup, then press Menu/Enter.
  3. Press the < or > buttons to select All Faxes, then press Menu/Enter.
  4. Press the < or > buttons to select V.34, then press Menu/Enter.
  5. Press the < or > buttons to select OFF, then press Menu/Enter to save the selection.
top
Disable or Enable the ECM
  1. Press Menu/Enter.
  2. Press the < or > buttons to select Fax Setup, then press Menu/Enter.
  3. Press the < or > buttons to select All Faxes, then press Menu/Enter.
  4. Press the < or > buttons to select ECM, then press Menu/Enter.
  5. Press the < or > buttons to select OFF or ON, then press Menu/Enter to save the selection.
    NOTE: The default setting for ECM is ON.

Dec 20, 2008 | HP LaserJet 3050 All-In-One Printer

1 Answer

Menu button disabled


Press and hold at same time with TV OFF Vol- and CH- wait till tv comes back on release buttons, you should now be in factory Menu for settings.

Nov 11, 2008 | RCA R52WH73 Projection Television

1 Answer

Sometime Tv gets stuck on a input or menu. Please HELP!


Unfortunatly the problem sounds like a software error which could only be sorted by an engineer, also your buttons on the front are also controlled by software,and cannot be disabled.

Dec 23, 2006 | Toshiba 32A43 32" TV

Not finding what you are looking for?
Nikon D70s Digital Camera Logo

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nikon Cameras Experts

kakima

Level 3 Expert

102366 Answers

Steve

Level 3 Expert

3287 Answers

Ric Donato

Level 2 Expert

225 Answers

Are you a Nikon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...