Question about Husqvarna Rose

2 Answers

What do I do my husqvarna rose beeps when start to sew in the display window the presser foot flashes what's wrong?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Husqvarna Master
  • 470 Answers

If it starts to sew, then stops and beeps; its the Thread Out sensor.
They call it the thread tensioner but that's not how it works.
We had two these machines and had the Sensor removed or disconnected.
No more stopping and beeping every few seconds.

Posted on Apr 03, 2015

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Husqvarna Expert
  • 371 Answers

It thinks the presser foot is in the up position. Will need to be repaired by experienced service tech (preferably a certified Viking service tech). There is a clamp that may just be out of place or it could be more involved. Good luck.

Posted on Apr 03, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Viking Rose will start, sew 3 stitches, then stop and raise the pressor foot and beep over and over. Do you have any idea what is wrong?


here's some suggestions
need new needle
needs to be rethreaded top & bobbin
needs to be cleaned under the needle plate & in the bobbin area
for lint
the wrong foot is being used
if none of these suggestion help then the machine may have to
be checked

Sep 09, 2012 | Husqvarna Rose

1 Answer

When pressing the foot control the machine won't run, it shows the presser foot blinking on the screen even when the presser foot lever is down.


check the connections, if they are good, your foot pedal has a short in it, so its not completing the circuit when depressed

Jul 15, 2011 | Husqvarna Rose

1 Answer

My husqvqrna rose is telling me that the presser foot is up, and won't sew. but, the foot is down.


There is a micro switch next to the pressure foot lifter lever, and a lot of time the tab that activates that switch breaks off the lifter lever. A Viking dealer should be able to replace it for you.

Apr 24, 2011 | Husqvarna Rose

1 Answer

My Rose sewing machine will not sew. It beeps and the presser foot icon flashes. I have re threaded, re bobbined, re placed the presser foot, and I think I have cleared the memory, but I am not really...


That light means you need to lower the presser foot. It cannot sew until the foot is lowered. The lever to lower the foot is behind the needle area on the back.

Feb 05, 2011 | Husqvarna Rose

1 Answer

Husqvarna rose tried to run it and the pressure foot light comes flashing on and will not run. yes the presser foot is in the down position


There is a safety switch underneath the presser foot lever, its tucked away in the body cavity and its tough to see. The switch is operated by a metal spring that turns the switch off and on according to the presser foot lifter position. the spring, which kinda looks like a fork, gets compressed each time you lift the presser foot. It wears and works intermitantly. A dealer is the only solution, the back needs to come of, and its a dang tough job to replace without damaging the replacement spring.

The other thing it could be is a jammed check spring inside the tension assembly, again its a tough job as the auto tension assembly must be removed, along with the winder and loosening of the main board.

derek

Jan 15, 2011 | Husqvarna Rose

1 Answer

On my husqvarna rose when i press on the foot pedal it just beeps and indicates the foot isn,t down. it is. No matter if its up or down it will not start sewing. please help.


The Rose has a spring that activates a sensor that detects when the foot is up or down and yours has apparently broken. You will probably need to find an authorized service center to replace it. Not too many shops will know what to do or which part it is.

Best Wishes

Aug 10, 2010 | Husqvarna Rose

1 Answer

Info screen keeps beeping to change pressure foot, and I have the correct pressure foot attached to the machine.


If this machine is a Rose, the screen flashes the foot because it thinks the foot is in the up position, not because your using the wrong foot type. There is a spring that can break and a switch that can sometimes go bad that gives that error message. A trip to your service tech is required. That part has a 20 or 25 year guarantee if you are the original purchaser. Labor was covered for one year from date of purchase.

Sep 27, 2009 | Husqvarna Sewing Machines

1 Answer

Presser foot husquvarna rose


You should be able to adjust the pressure on the presser foot. Check your user manual or see an authorized husqvarna viking dealer for assistance. They are usually eager to help. You can locate a dealer near you by visiting the husqvarna viking website and clicking on the Dealer link on the left-hand side of the page - http://www.husqvarnaviking.com

Good luck.

Nov 11, 2008 | Husqvarna Rose

1 Answer

Presser foot is down but will not sew


new presser bar lifter kit has to be fitted by technician.

Jun 04, 2008 | Husqvarna Rose

1 Answer

Doesn't sew


Hi emnsam....please update your post with the complete Model Number in it's entirety and I will be able to advise you.

Jul 29, 2007 | Husqvarna Rose

Not finding what you are looking for?
Sewing Machines Logo

234 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Sewing Machines Experts

Douglas Plant
Douglas Plant

Level 2 Expert

184 Answers

Tally Girl
Tally Girl

Level 3 Expert

1125 Answers

Derek Massey

Level 2 Expert

92 Answers

Are you a Husqvarna Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...