Question about Konica Minolta Office Equipment & Supplies
I am certified on that model and we don't attempt to repair the boards. The issue is because it's color and people use them for counterfeiting, every resistor and load value must be precise or the machine will error out and become a huge paperweight. The other issue is the serial number loaded into the nvram board. It's a small board with a battery. You can't replace one board unless you install a new serial number into it which is very difficult and you need the instructions ect. I can safely say you won't have success replacing components. Sadly I would reccomend biting the bullet and calling in the tech to replace the board. It should come with a warranty so you won't have to replace it again.
Posted on Apr 03, 2015
"The board has several resistors..."
... and capacitors, and transistors, and chips, and....
I highly recommend you call an expert to repair the printer.
Posted on Apr 02, 2015
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Apr 17, 2014 | Konica Minolta Office Equipment & Supplies
Jan 21, 2014 | Compatible Konica Minolta Bizhub Pro C5501...
Dec 30, 2013 | Konica Minolta Bizhub Pro C6500 Color...
72 people viewed this question
Usually answered in minutes!
Level 3 Expert
Level 3 Expert
Level 2 Expert