Question about LotFancy Black keyboard for Samsung N148 N148-DP03 N148-DP04 N148-DP05 N150 NB20 NB30 N128 N145 NP-N145 N145-JP02 N145-JP03; fit part numbers CNBA5902768C Laptop / Notebook US Layout

3 Answers

Keys like U, I, O, P, J, K, L, M, 0, ,, /, ;. When I press the u key, 4 appears. Also when I press 6, ^ appears, * appears instead of P, - appears instead of ;. What do I do, please?

It started when the system's hard disk was changed with a new one and formatted. When I press the u key, 4 appears. Also when I press 6, ^ appears, * appears instead of P, - appears instead of ;. What do I do, please?

Posted by on

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Expert
  • 94 Answers

I could not see a number lock key on an image of this notebook's keyboard. You may need to connect a full size usb keyboard to the notebook in order to turn off the number lock.

If unsuccessful (keyboard hardware assumed OK since hard drive switch started the problem) ... check language and keyboard settings of the machine. If still unsuccessful check the computer manufacturer's website for the proper keyboard driver for your notebook and its OS.

Posted on Apr 02, 2015

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

Try another keyboard, maybe a friend will let you use one to see if that ends the problem, then tyr your keyboard on the friends computer.

Posted on Apr 02, 2015

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

Num lock or function lock is on Function is FN button some times in blue or your shift key is stuck down.

Posted on Apr 02, 2015

Testimonial: "Thanks. The keys work if the Fn key is held. At least I can manage it while hoping for final solution. Thanks once more."

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset konica c3110 admin password


1. Enter the [SERVICE MODE].

2. Press the Select key.
3. Press the following keys in this order.; Stop/Reset ? 0 ? 0 ? Stop/Reset ? 0 ? 1
4. The Service Mode menu will appear.
5. Select [ADMIN. REGISTRATION] and press the Select key.
6. Check that the current ADMIN. No. is displayed and then press the [Back] key.
7. Enter the new ADMIN. No. from the 10-key pad and press the Select key.

Jun 15, 2016 | Konica Minolta Office Equipment & Supplies

6 Answers

On my Brother MFC410CN Printer Message reads Unable to clean I have followed TroubleShooting instrctions and it still appears


MFC620CN/425CN/420CN/410CN/215C/210C and FAX2440C
Press the Menu/Set, Black Start, Menu/Set, and Black Start keys in this order.TIP: For the FAX models equipped with numerical keypads, you may press the Menu/Set, Black Start, and 0 keys instead in the same way as conventional models.Then "MAINTENANCE 10" appears on the LCD. Press 82 using the numerical keys/arrows.
Then press the Menu/Set key.
Error code will display indicating source of error if it is 41 thats print head error,
replace machine.

press stop to exit if needed.
(http://www.fixya.com/support/t250171-brother_mfc_215c_unable_clean)

Oct 06, 2008 | Televison & Video

1 Answer

How to reset administrator code i have lose


Procedure 1) Press the Utility key 2) Press the following keys in this order. Stop-> 0-> 0-> Stop-> 0-> 1 3) The Service mode screen will appear. 4) Press [ Admin. Registration] 5) Using the 10-Key pad, type the 6-digit administrator number (000000 to 999999) to be register or changed. 6) Press the [Yes] key to register the administrator number.

Oct 04, 2014 | Konica Minolta bizhub Office Equipment &...

1 Answer

Incorrect t/c bizhub 161f


1. Press the Utility key.
2. Press the following keys in this order to enter the Service Mode.
Stop ? 0 ? 0 ? Stop ? 0 ? 1
3. The first Service mode screen appears.

4. Punch in 4
5. Should show DISPLAY
6. Use UP/DOWN arrow to TC Type
7. TC Type
8. (For Future info note current number) Set to 5 (North/South America) I assume that is where you are living!!!!!
Press YES to apply

Dec 26, 2013 | Konica Minolta Office Equipment & Supplies

1 Answer

Ink absorber full


1. Press the Menu & Mono start keys. Next press the up arrow key 4 times to make the machine enter the maintenance mode.

2. Enter 8 & 0 by using the up arrow key & SET keys.

3. Press the mono start key several times untill the purge count appears on the LCD.

4. Enter 2 7 8 & 3 by using the up arrow key & set keys to reset the purge count to zero.

5. Press the stop/exit key to return to the initial stage of the maintanance mode.

6. Enter 9 twice by using the up arrow & set key's to exit from maintenance mode

i hope it helps

Sep 26, 2013 | Brother DCPJ125 All-In-One Inkjet Printer

1 Answer

When i press other key its not working


NUMBER LOCK
You have press the NumLk key (number lock) and this changes the right hand keys to a number pad.
Press the NumLk key (also doubles as the ScrLk key to toggle the Number lock). it is near the F12 function key. When the NumLk has been enabled a LED light is turn on to indicate this function has been selected. Press the NumLk key again to turn off the Number Lock.

Nov 04, 2012 | Samsung N150 (36725723009) Netbook

3 Answers

How do I enable this player to become multi-region? I believe it's based on a Pioneer rather than one of Teac's own designs.



Hi

Thanks for using FixYa. To make it multiregional please follow these step by step instructions using your remote control:


1. Switch power on

2. Open the DVD tray (leave it open with no DVD in it)
3. Press "stop"
4. Press "734466"
5. Use cursor to scroll up or down until it says "Region 0"
6. Press "OK/Enter"
7. Switch power off
8. Switch power on



It show now play all region DVD’s. Please do accept the solution if the issue is resolved or else revert for further assistance.


Thanks
Rylee

Jan 30, 2010 | Teac DV-H500 DVD Player

1 Answer

Nesesito un codigo para un dvd marca jwin grasias


Hi,

Some unlock codes for Jwin DVD players are:
Jwin JD-VD100 / JD-VD703 / JD-VD753

1. Press SETUP
2. Press PREV CHAPTER, NEXT CHAPTER, PREV CHAPTER, NEXT CHAPTER, PREV CHAPTER
3. "VerX" is displayed (X=RC)
4. Select the RC with RIGHT and LEFT (255=Codefree)
5. Press RETURN

Jwin JD-VD120

1. Press SETUP
2. Press 1, 3, 6, 9
3. Current RC should be displayed
4. Select RC with UP, "DOWN" (0=codefree)
5. Press ENTER

Jwin JD-VD130

1. Method 1:Press SETUP
2. Press 1, 3, 6, 9
3. Current RC should be displayed
4. Select RC with UP, "DOWN" (0=codefree)
5. Press ENTER

1. Method 2:Open the disc tray
2. Press PROG
3. Press ENTER 3 x
4. A menu should appear.
5. Select RC with UP, "DOWN" (0=codefree)
6. Press STOP
7. Close the disc tray

Jwin JD-VD135 / JD-VD147

1. Open the disc tray
2. Press SETUP
3. Press 1, 3, 8, 9
4. Use Up/Down keys to change the region
5. Press SETUP

Jwin JD-VD140 / JD-VD501

1. Open the disc tray
2. Press 2, 8, 1, 2
3. Use the arrow keys to change the region (9 = multiregion)
4. Press SETUP
5. Close the disc tray

Jwin JD-VD145

1. Open the disc tray
2. Press 9, 7, 3, 5
3. Change the region

Jwin JD-VD200 / JD-VD203 / JD-VD500 / JD-VD503

1. (Open the disc tray)
2. Press SETUP
3. Press 1, 3, 6, 9
4. Press LEFT 3 x
5. Press RIGHT
6. A new menu entry appears (Version)
7. Select it and select RC (0=codefree)

Jwin JD-VD138 / JD-VD504 / JD-VD602 / JD-VD603 / JD-VD745 / JD-VD903

no known hacks

or you can try here.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Mar 18, 2008 | Televison & Video

3 Answers

Errors list : 46, 50, A1


CP315C/310CN/120C/115C/117C/110C
(1) Press the (1) Press the
Menu and Mono Start keys. Menu and Mono Start keys. Next press the key four times to make the machine Next press the key four times to make the machine
enter the maintenance mode. enter the maintenance mode.
(2) Enter 8 and 0 by using the and (2) Enter 8 and 0 by using the and
Set keys.* Set keys .*
(*To enter a numerical code on models having no numerical keypad, press the key several times to (* To enter a numerical code on models having no numerical keypad, press the key several times to
display the numerical code to be entered and then press the display the numerical code to be entered and then press the
Set key. Set key. Repeat this operation for each Repeat this operation for each
numerical code.) numerical code.)
(3) Press the (3) Press the
Mono Start key several times until the purge count appears on the LCD. Mono Start key several times until the purge count appears on the LCD.
(4) Enter 2, 7, 8, and 3 by using the and (4) Enter 2, 7, 8, and 3 by using the and
Set keys to reset the purge count to zero.* Set keys to reset the purge count to zero .*
(5) Press the (5) Press the
Stop/Exit key to return to the initial stage of the maintenance mode. Stop / Exit key to return to the initial stage of the maintenance mode.
(6) Enter 9 twice by using the and (6) Enter 9 twice by using the and
Set keys to exit from the maintenance mode.* Set keys to exit from the maintenance mode .*

Mar 01, 2008 | Brother DCP 115C All-In-One InkJet Printer

3 Answers

Insignia NS pdvd10


Unlock
Insignia NS pdvd10
It`s really works

1) On the remote control type "SETUP" button
2) Select "PREFERENCES" in the menu with
3) Validate it with the button "OK"
4) Enter the code : "224455"
5) With the direction keys type:
a) Left key : < (Nothing happens)
b) Down key : v (a menu appears on the screen
with all region)
6) Select the Region : 0 (all) with the direction keys
7) Validate it with the button "OK"
8) Finish the process by typing the "SETUP" button.

Jan 09, 2008 | Insignia NS-8PDVD

Not finding what you are looking for?
LotFancy Black keyboard for Samsung N148 N148-DP03 N148-DP04 N148-DP05 N150 NB20 NB30 N128 N145 NP-N145 N145-JP02 N145-JP03; fit part numbers CNBA5902768C Laptop / Notebook US Layout Logo

117 people viewed this question

Ask a Question

Usually answered in minutes!

Top LotFancy Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a LotFancy Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...