Question about Canon Office Equipment & Supplies

2 Answers

How can i solve the problem of System error E100 in a Canon iR 1020 photocopier?

When I Switc on my Canon iR 1020 photocopier/scanner it displays the massage system error E 100

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer got voted for 20 times.

  • Canon Expert
  • 234 Answers

You should replace laser scanner unit,or DC controller PCB

Posted on Apr 03, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Canon Master
  • 2,963 Answers

You should have a PDF Owner's manual on the software install disk. Troubleshooting section should say what the error is and what to do to fix. Or try this:
http://printcopy.info/?l=en&mod=free&chap=erc&brand=Canon&model=iR1020

Posted on Apr 02, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How can i Solve the Error E100


Found from another site..
Check the following:
1) Drum unit
Is the drum unit installed in host machine?
NO : Install the drum unit.
2) Connection
Is the connection of the connector (J908) on the BD detection
PCB, connector (J907) of the laser unit, and connector (J102) on
the DC controller PCB normal?
NO : Correct the connection.
3) Laser/scanner unit, DC controller PCB
Try replacing the laser/scanner unit. Is the fault corrected?
YES : End.
NO : Replace the DC controller PCB

Hope this helps!

Jun 24, 2014 | Canon Service Manual For Ir 600

2 Answers

How do i clear system error E100 on an IR 10181 canon machine and what may be causing this error?


E100 0000 BD detection PCB failureThe BD detection PCB is faulty. - Check the connector of the BD detection PCB.- Replace the laser scanner unit.- Replace the DC controller PCB.

Dec 14, 2011 | Canon Office Equipment & Supplies

1 Answer

My ir canon photocopier shows E 100 error. Please help


if you are changing the machine room from cold to warm, it can causes the error code E100, it's a condensation of the laser sensor. to solve this problem you need change the laser sensor PCB or the laser unit. or try to warm up the pcb sensor with a hot air. look at the picture to identify the laser sensor:
mabroukmedal_37.jpg

Dec 17, 2010 | Canon iR 2016i Black and White Copier

2 Answers

How can i solve error canon Ir2016 (download standby) error


Hi, you need to upgrade firmware from start. Download standby is message that appears when system is colapsed and when you want to upgrade firmware from service mode.

Jun 11, 2010 | Canon iR 2016i Black and White Copier

3 Answers

My iR2016 displays "system error E007, would you please help me repairing it?-


it error code means fuser unite problem please change fuser unite then solve your problem

Nov 20, 2009 | Canon PC-940 Black and White Copier

3 Answers

Copier ir 2016 system error E100


hi there

first replace the drum (i.e the photoconductive cylinder)
I wish you solve the problem.

thank you and not forget to vote me any how.

Jul 15, 2009 | Canon iR 2016i Black and White Copier

1 Answer

System Error E100


Most likely, the tab on the rear side of drum unit has broken off. Thus causing the Lazer Shutter not to open. There are 3 or 4 other possibilities other than replacing the drum unit.

Jun 02, 2009 | Canon iR 2020i Laser Printer

1 Answer

Solve System Error E100


Hi
E100 is laser related error.

You can try to reconect the conectors on dc controler board, and on laser unit, clean the laser, check if the laser shuter is broken.
If notthing helps the next step would be to chnage the laser unit and/or dc pcb

Jun 02, 2009 | Canon iR 2020i Laser Printer

4 Answers

SYSTEM ERROR E100


Hey
How can I solve this error code(IR1600) on my canon copier by myself?

Nov 27, 2007 | Canon imageRUNNER 2000 Copier

5 Answers

Canon IR 2000


Canon IR 2000

System Error E100

Feb 27, 2007 | Canon imageRUNNER 2000 Copier

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

182 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1973 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...