Question about Sharp LC Televison & Video

1 Answer

The TV button flashes on my new Sharp Aquos remote controller model GB118WJSA as soon as the batteries are inserted and it won't send any signal to the TV

I just installed yesterday and am trying to set up correctly.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Sharp Master
  • 73,619 Answers

These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. Surf the site with patience.

Posted on Apr 01, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sharp Aquos 32 LCD freezes on air channel


I had the same problem, same channel, same day. It must be a problem with signal strength. With the TV on, I unplugged the coax cable that leads to my antenna (I am not on cable). As soon as I disconnected the antenna, I could change the channel off of 11.1. I plugged the antenna back in and all other channels work. Hope this helps.

Jan 27, 2013 | Sharp Aquos LC-32D42 TV

1 Answer

My sharp aquos lc-42d65u is not responding to my remote control . another word my t.v does not read my remote control at all. can someone help me to fix my remote ?


U already change the remote control for brand new batteries wright?Yes.Remote controls devices are heavily depend on it CPU chip for all of it functions.Test the tv manual buttons like Power,Menu,Volume - + and Channel + - all work?Yes.The tv remote control CPU is dead that why doesn't read the tv infered laser signal at all.Try website like Remotes.com to buy an original remote for the replacement.

Apr 04, 2011 | Sharp LC42D65U 42 in. LCD HDTV

1 Answer

The battery is brand new on my remote and the red light flashes when I push button but the tv doesn't respond.


Is it one of hose remote that needs to be programmed for your TV or original reamote?
Testing remote control:
The remote control puts out IR (InfraRed) signal that human eyes cannot see, to find out if the remote is sending out the signal or not you just point the remote at the digital camera's Lens (Digital Camera can detect IR), you should see flashing light on the camera's screen when any one of the remote button is pushed. If you do see the flashing on the camera, then the problem is in the TV IR receiver or the main logic board; more troubleshooting with scope will be needed to look at the signals.
Parts: www.shopjimmy.com
www.remotes.com
Please post back.

Oct 29, 2010 | Sharp LC52D85U 52 in. LCD TV

1 Answer

Brand New TV - remote doesnt work


Is it the original remote for this TV?
Testing remote control:
The remote control puts out IR (InfraRed) signal that human eyes cannot see, to find out if the remote is sending out the signal or not you just point the remote at the digital camera’s Lens (Digital Camera can detect IR), you should see flashing light on the camera’s screen when any one of the remote button is pushed. If you do see the flashing on the camera, then the problem is in the TV IR receiver or the main logic board; more troubleshooting with scope will be needed to look at the signals.
Parts: www.shopjimmy.com
www.remotes.com

Jul 03, 2010 | Sharp Aquos LC-46D62U 46 in. LCD HDTV

1 Answer

I cant turn my sharp aquos 32" on or off with the remote. I also cant mute it or adjust the volume.


Testing remote control:
The remote control puts out IR (InfraRed) signal that human eyes cannot see, to find out if the remote is sending out the signal or not you just point the remote at the digital camera’s Lens (Digital Camera can detect IR), you should see flashing light on the camera’s screen when any one of the remote button is pushed. If you do see the flashing on the camera, then the problem is in the TV IR receiver or the main logic board; more troubleshooting with scope will be needed to look at the signals.
Parts: www.shopjimmy.com
New remotes: www.remotes.com

Jun 29, 2010 | Sharp Aquos LC-32G4U 32 in. HD-Ready LCD...

1 Answer

The remote control has power, the television works, but the remote control is not working for the television...


Testing remote control:
The remote control puts out IR (InfraRed) signal that human eyes cannot see, to find out if the remote is sending out the signal or not you just point the remote at the digital camera’s Lens (Digital Camera can detect IR), you should see flashing light on the camera’s screen when any one of the remote button is pushed.
If the remote does send out signals, then the problem can be the IR receiver in the TV, it can be due to failed 5vdc or the IR receiver module is bad.
http://www.shopjimmy.com/catalogsearch/result/index/?q=Sharp+Aquos+LC-42D62U&limit=25

Please see my basic troubleshooting guide here:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide

http://s807.photobucket.com/home/budm/allalbums

Jun 28, 2010 | Sharp Aquos LC-42D62U 42 in. LCD HDTV

1 Answer

Re-program a Sharp remote control for LC-46XD1E


Are you sure it is the remote that has stopped working? If you get something like a camera phone and put it over the LED on the remote and press the buttons (with the phone in camera mode) the camera will pick up the infered signal from the remote. This will rule out if it is the TV or remote.

If you get the infered signal then your TV is faulty (possibly a main pcb fault) if you dont then it is your remote. Which as far as I am award you can not reprogram, but you can get them from places on the internet (search on google) for a couple of 10 pound.

Jan 30, 2010 | Sharp Aquos LC46XD1E 46 in. HD-Ready LCD...

1 Answer

Sharp AQUOS 37


My friend fixed it but I have no idea how he did it.

Jan 18, 2010 | Sharp Aquos LC37D44U 37 in. LCD HDTV

1 Answer

Tv remote controle codes for starchoice 5-in-1 remote (sharp aquos tv)


you might try unplugging the TV and then plugging in again. It worked for me

Nov 17, 2008 | Sharp Aquos LC-37G4U 37 in. HD-Ready LCD...

2 Answers

Remote volume control for Sharp Aquos 42inch LCD not working


ok please open the remote then clean it with pencil eraser.

Oct 09, 2007 | Sharp Aquos LC-42D62U 42 in. LCD HDTV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

249 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73619 Answers

Jaime Hernandez

Level 3 Expert

2315 Answers

Cindy Wells

Level 3 Expert

5056 Answers

Are you a Sharp Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...