Question about TORK Mechanical Hardwired Timer 1101-O

Open Question

All of the lights are not coming on when timer is set set to come on

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I set the time on my Westinghouse TM201, two outlet timer, and then set the time I want the lights to come on and off?

I believe with that model you have to kill the power and reconnect by unplugging you will be met with a flashing screen this is where you can set timer....

Dec 02, 2014 | Hardware & Accessories

1 Answer

Caloric wall oven set timer and now oven will not come on

reset timer to zero .turn on the oven .numbers should flash press once .on 12 light should now come on for the oven.

Dec 20, 2013 | Cars & Trucks

1 Answer

How do I set different programs on the digit timer for my Christmas lights to come on different times??

Copy following link to help identify timer:

Note there are links to other brands.
Add comment and describe timer for more possible help.

Nov 27, 2012 | Hardware & Accessories

1 Answer

I have an Ingraham Model 12-830 350 timer which will not turn on the light. I can set the times and the redlight comes on but the light does not go on.

Turn on the light, and check bulb:
Copy following link for general instructions and troubleshoot

Jul 16, 2012 | Salton Ingraham Single Program Timer

1 Answer

It works fine until the time i have set for lights to come on they dont come on, but if i plug in recept. Ii works fine

Timer is not identified. Problem is not clear.
Add a comment with clear description of product, and say what you have done to set timer.
What do you plug-in to make lights work?

Question is posted under Woods dawn-dusk timer that turns ON automatically at dusk, and then turns OFF 2 4 6 or 8 hours later:
Many different timer-brands work in same manner.

Jul 28, 2011 | Woods Outdoor Lighting Timer

1 Answer

Hi, I have an Intermatic T103 Timer used to turn our parking lot light off and on. This morning I came in to work at 8;30 and the light was on, eventhough I had set the timer to turn off the light at...

Did this ever work before, or is this a new installation? Assuming this is a new installation, it's 90% likely to just not be wired correctly. The hot wire needs to come into the switch and into the clock (with a jumper wire). The neutral needs to come into the clock, and back out to the light (two white wires on one terminal). The output hot wire comes out from the switch to the light. Being a double pole switch, that will leave one input and one output not used on the switch.

Sep 20, 2010 | Intermatic T103 Indoor 120-Volt 40-amp...

1 Answer

Power Center day/night timer

I would use two timers for this rather than the Zilla, but you could put the moon lights into the second timer set on for short periods before and after the white lights, then plug the white lights into the day outlets and set the timer to have them on for the five hours.

Feb 28, 2010 | Coralife Zilla Aqualight Power Center

1 Answer

Timer doesn't come on after being set. Operates landscape lights

Check your circuit breaker that feeds the timer circuit in your main electric panel. It may have tripped. Sometimes when a breaker trips it's hard to tell visually, so turn the breaker off, then back on.
Also, the circuit that feeds the timer may be on the load side of a GFCI receptacle. Look for one that has tripped. Sometimes they are found in obscure places.

Apr 26, 2009 | Intermatic & Indoor/Outdoor Rain Tight...

Not finding what you are looking for?
TORK Mechanical Hardwired Timer 1101-O Logo

Related Topics:

499 people viewed this question

Ask a Question

Usually answered in minutes!

Top TORK Home Experts

Donni Steen

Level 3 Expert

659 Answers

Tom Chichester

Level 3 Expert

35584 Answers

Brad Brown

Level 3 Expert

15950 Answers

Are you a TORK Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides