Question about One For All URC-3021 Remote Control

5 Answers

Emerson remote for emerson tv/vcr combo

I have tried every remote control code listed by several of your responders for the emerson tv, tv/vcr, and even vcr alone. I have tried the univeral code 3021 and none of these work. Any ideas to make my Emerson remote talk to my emerson tv/vcr combo? Thanks so much!

Posted by on

  • 8 more comments 
  • ddiaz Aug 11, 2008

    I have bought several remotes all different types of universal all listing Emerson brand and none work at all. I just bought 2 more one RCA universal and one GE universal please help me find a code

  • Anonymous Aug 23, 2008

    need codes for emerson tv for 3021 remote

  • fbfiveohv3 Sep 13, 2008

    I just bought an RCA remote control, RCU410 and I've tried EVERY code to sync it to my Emerson TV/VCR/DVD combo. Nothing works. It spit the 064 at me when I went to Retrieval. Does not work though. this is a really frustrating problem. I'd rather have my fingers nails pulled off with pliers than have to mess with this remote control again. I just want it to work.

  • Christopher Walker
    Christopher Walker Jan 04, 2009

    Yea, i have tried several Uv Remotes for my Emerson Tv and none work, the last one I tried I received from a friend it was a Jensen JR500 and again no luck with any of the codes, all ****.....I even did the auto find feature for 20 minutes, (I went threw it a few times to make sure i didnt fly past it) mode..power..mode...power....mode....power, the only thing i managed to acomplish was burning 20 minutes of my life that could have been better spent......Now before you go saying that the remote is bad I figured I would stop you and letcha know that it paired with my Phillips just fine.`Chris

  • Anonymous Mar 15, 2014

    need codes for Emerson vcr

  • Anonymous Mar 15, 2014

    codes for emerson vcr/tv combo

  • Anonymous Mar 22, 2014

    I want to program remote big button tek pak to an emerson tv with no code

  • Anonymous Mar 27, 2014

    no remote

  • Anonymous Mar 28, 2014

    tried these codes, 0047,0466,0747,1347,1447 and none of them worked

  • Anonymous Mar 29, 2014

    Trying to add a new Emerson Android 4.1.1 to an existing network pc based (using ubuntu os)

×

5 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 259 Answers

Emerson TV codes 0154, 0236, 0463, 0180, 0178,
0171, 0623
Emerson TV VCR Combos 0479, 1479, 1278



SEARCHING FOR YOUR CODE
If your device does not respond to the remote control after trying all codes
listed for your brand, or if your brand is not listed at all, try searching for
your code.
NOTE: Before performing a code search for a DVD player or a VCR, turn on the device and
insert the required media.
For example, to search for a code for your TV:
1. On the remote control, press TV once.
2. Press and hold SET until the LED (red light) blinks twice,
then release SET.
3. Enter 9 - 9 - 1.The LED will blink twice.
4. Aim the remote control at the TV and slowly alternate
between pressing POWER and TV. Stop when the TV turns off
(after pressing POWER). If the device does not have a Power
key, you can substitute another function, such as digits 0 ~ 9 ,
CH, or PLAY).
NOTE: In the search mode, the remote control will send IR codes from
its library to the selected device, starting with the most popular code
first.
5. To lock in the code, press and release SET.The LED will
blink twice.
6. To search for the codes of your other devices, repeat steps
1 through 5, but substitute the appropriate device key for
the device you are searching for.
here is the maual for your remote:
http://www.ofausa.com/remote_manual/URC4...

Posted on Dec 12, 2007

  • BEVERLY JENKINS
    BEVERLY JENKINS Aug 15, 2014

    i have an emerson tv dvd combo with direct tv remote and can not get tv programmed into remote. tried all codes listed and it still doesnt work. please help

×

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Use code 0000. My Emerson EWC1303 TV/VCR combo works perfectly with that code.

Posted on Feb 15, 2009

  • Chuck Ross
    Chuck Ross Feb 04, 2016

    Thank you works perfectly Chuck

×

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have a dvd/vcr/tv combo made by emerson and my remote broke. i bought a universal remote and none of my codes work. can someone please help me find a code?

Posted on Feb 27, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

APEX DVD player coded

Posted on Jan 05, 2014

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have an Emerson, I bought a bunch of remotes and spent a lot of time. Finally I looked on the back of the tv and called the 800 number, bought the right remote and am very happy now.

Posted on Apr 14, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I Need A Remote Code For An Emerson EWC19T5 and One For All URC 4021 remote


Hello
Setup codes for Emerson Tv with One For All URC-4021 remote control are:

0154, 0236, 0463, 0180, 0178,
0171, 0623

The One For All 4 Device Universal Remote Control is preprogrammed at

the factory to operate an RCA TV, a Toshiba DVD player, a Motorola cable

box, and an RCA VCR.To control devices other than the default brands,perform
the following steps; otherwise skip this section:

[1] Turn on a desired device (e.g.,VCR or DVD player) and, if
applicable, insert media (e.g., cassette or disc).

NOTE: Please read steps 2 through 4 completely before proceeding.

Highlight or write down the codes and device you wish to program
before starting step 2.

[2] On the remote control,press a device key once (i.e., VCR/PVR,
DVD, CBL/SAT,or TV).

NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo,

or TV/VCR/DVD Player Combo press VCR/PVR once.After programming

a VCR Combo device, you will be able to control channel selection,

volume, and VCR functions.

NOTE: To program control of a DVD Player,DVD Player/VCR

Combo, or TV/DVD Player Combo, press DVD once.After programming

a DVD Combo device, you will be able to control channel selection,

volume, and DVD functions.

NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)

Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.

[3] Press and hold SET until the LED (red light) blinks twice,
then release SET.

[4] Use the Manufacturer's Codes (starting on page 18) to

locate the type of device and brand name and then enter

the first four-digit code for your device. If performed correctly,
the LED will blink twice.

NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.

[5] Aim the remote control at the device and press POWER

once.The device should turn off. If it does not, repeat

steps 2 through 5, trying each code for your brand until

you find one that works. If it still doesn't work, try
Searching For Your Code on next
NOTE: If the device does not have a POWER key, press PLAY
OK.

Sep 26, 2011 | One For All URC-3021 Remote Control

1 Answer

Emerson tv;vcr combo, have one for all remote, need code and instruction on setting up new remote


Hello
You haven't specified nothing about the model number or any other descriptions about your Emerson Combo or the remote control you wish to setup with it. Anyway, I hereby posts some codes for Emerson TV/VCR combo. Try with them.
0227 0233 0254 0264
0265 0266 0310 0325 [0039 0252]
Where the code is listed as [### ###] the first is for the TV and the second is for the VCR. Otherwise just the one code operates both the TV and the VCR.
Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
OK.

Aug 09, 2011 | Televison & Video

1 Answer

I need code for tv


Hello

Three digit universal remote code for emerson are:-

004/ 009/ 014/ 023/ 024/ 025/ 026/ 027/ 030/ 032/ 033/ 034/ 035/ 036/ 037/ 038/ 039/ 040/ 041/ 042/ 043/ 045/ 046/ 049/ 053/ 116/ 135/ 147/ 177/ 179

Four digit universal remote code for Emerson TV/vcr combo are:-

0456 [0458 0227]
Where the code is listed as [### ###] the first is for the DVD and the second is for the VCR. Otherwise just the one code operates both the DVD and the VCR

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
Code Search If after trying "Direct Code Entry" your device does not respond, or if your brand is not listed, try doing a search of the code library for your code by following these steps.
  1. Manually turn on the device (TV, VCR, etc.) to be controlled.
  2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  3. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks once, then stays on.
  4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit.
  5. Press and release MUTE to install the code. The indicator light goes off.
Also try these four digit codes for Emerson Tv also. There are so many codes for Emerson Tv.
0004 0009 0044 0135 0049 0051 0189 0053 0147 0039 0130 0227 0233 0250 0252 0254 0257 0265 0266 0310 0325 0456 0040 0041 0042 0021 0023 0024 0179 0045 0025 0027 0030 0032 0034 0035 0037

Nov 26, 2010 | Emerson EWC19T3 19 in. TV/VCR/DVD Combo

1 Answer

I am trying to codes for my Emerson Tv and Vcr. I


I can help you with your URC-3021 Universal Remote Control issues.

The codes for Emerson TV's are: 0154, 0236, 0463, 0180, 0178, 0171, & 0623.
The codes for Emerson VCR's are: 0037, 0184, 0000, 0121, 0043, 0209, 0278, 0479, 1479, & 1278.
The codes for Emerson TV VCR Combos are: 0479, 1479, & 1278

For complete instructions on entering the URC-3021 remote codes, please refer to my posted Fixya Tip One For All URC-3021 Code Entry.

I hope that helps.
_______________________________________________
Reassign URC-3021 Device Key
Urc-3021 Code List Download
One For All URC-3021 Code Search

Feb 10, 2010 | One For All URC-3021 Remote Control

1 Answer

I need codes for my emerson tv dvd vcr combo


The control codes for an Emerson combo unit are:

TV VCR/DVD
036 041
039 027
155 002
155 008
198 231

To program your remote by entering a code, follow these steps:

  1. Turn on your TV.
  2. Press and hold the CODE SEARCH button for at least 3 seconds until the red LED lights up and stays lit.
  3. Press the TV button on the remote so that the LED blinks once and then remains solid red.
  4. Enter the first set of 3-digit codes from the list. The LED will blink once every keypress. After the 3rd digit, the red LED will turn off indicating that the code was recognized for the device. If the code was not compatible, the LED will flash several times and you need to return to step 2 to try that code again or to try the next code in the list.
  5. After the LED has turned off, aim the remote at the TV and press ON/OFF. If the device turns off, you have used the correct code and the remote was successfully programed. If the device does not power off, return to step 2 and try again with the next code in the list.
Repeat the process substituting the VCR or DVD button for the TV button.

I hope that helps.

Nov 27, 2009 | Innovage Jumbo Remote Control

1 Answer

Codes for emerson combo


TV/VCR Combos
Where the code is listed as [### ###] the first is for the TV and the second is
for the VCR. Otherwise just the one code operates both the TV and the VCR.

EMERSON . 0324 0924 0027 0028 0128 0228 0632 0134 [0505 0826] [0316 0626] [0316 0327]

Mar 10, 2009 | Philips PM3S Remote Control

1 Answer

Need a code for an RCA RCR312w universal remote-Emerson TV/VCR


To see RCA's code list you probably need their website but Emerson is one of several names now owned and built by Funai, who also builds Symphonic & Sylvania.
You might want to try those codes with your set.  

Dec 18, 2008 | Emerson EWC19T3 19 in. TV/VCR/DVD Combo

1 Answer

Programming cable channels for emerson tv vcr dvd combo


To see RCA's code list you probably need their website but Emerson is one of several names now owned and built by Funai, who also builds Symphonic & Sylvania. 
You might want to try those codes with your set.  

Dec 11, 2008 | Emerson EWC19T3 19 in. TV/VCR/DVD Combo

3 Answers

RCA Universal Remote set to my Emerson TV


RCA Universal Remote Control Programming Codes Programming Your Universal Remote.

The remote may already be set up to operate your brand of TV, VCR, or Cable Box. It is pre-programmed with following codes:
  • TV-000
  • VCR-000
  • Cable Box-000
  • AUX is programmed with VCR code 037
For brands that require programming, there are two ways to program: Using Code Lists or Code Search. Use Code Search if the code lists are not available or if the codes from the lists do not operate a device.

Programming a Device using Code Search:

  1. Manually turn ON your device (TV, VCR, Cable Box)
  2. Press and "HOLD" CODE SEARCH
  3. Press and release the device button you want to set up (TV, VCR, Cable Box) However, if you are using AUX for a device, press and release AUX first and then the device button for the type of device to be programmed (TV, VCR, or Cable). The selected device button will flash once.
  4. Release CODE SEARCH.
  5. Press OFF/ON repeatedly until the device turns off (you may have to press up to 100 times at a rate of once per second).
  6. Once the device turns off, press and release ENTER.
  7. With the device on, press any other button. If the device responds, no further programming is required. If the device does not respond, repeat steps 1-6.

Programming a device using the Code Lists:

  1. Find codes for each device and brand below.
  2. Press and "HOLD" CODE SEARCH.
  3. Press and release the TV, VCR or Cable button you want to set up. If programming AUX for a device, press and release AUX first and then the device to be programmed (TV, VCR or Cable). When the selected device button flashes proceed to the next step.
  4. Enter the three digit code from the TV, VCR or Cable Box code lists.

  5. Release CODE SEARCH.
  6. With the device on, press another button, for example CHANNEL UP. If the device responds, no further programming is required. If the device does not respond, repeat steps 1-5 using another code number from the lists.
Emerson CODES 011,026,027,028,029,030 031,032,037,042,053,064 065,067,075,076,079

Oct 12, 2008 | RCA 257003 Remote Control

1 Answer

Programming remote to a tv/vcr combo


can not program urc 3220 remote to audiovox 21" tv, tried all instructions in manual did not respond

Dec 23, 2007 | One For All URC4220 Remote Control

Not finding what you are looking for?
One For All URC-3021 Remote Control Logo

12,432 people viewed this question

Ask a Question

Usually answered in minutes!

Top One For All Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71672 Answers

Cindy Wells

Level 3 Expert

4885 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you an One For All Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...